2021 Equipment Emergency Plan (Selected 5)
In real life or work and study, sometimes there will be some unexpected events or accidents, in order to reduce the harm caused by the accident, it is often necessary to prepare an excellent emergency plan in advance. So have you ever understood the emergency plan? The following is my collection of 2021 equipment emergency plan (selected 5), for reference only, I hope it can help you.
Equipment Emergency Plan 1
In order to improve the hospital's internal self-prevention, self-help ability, so that all staff can understand and master the characteristics of the fire, in the event of fire accidents, can do a planned, step-by-step, accurate, timely and effective fight, so that the fire damage is reduced to a minimum, according to: "prevention first, prevention and elimination of combining
A key part of the fire fighting emergency measures
1, the ward fire accident, the first thing should be to stabilize the mood of the staff, so as to avoid confusion and cause greater losses. Do "first save people, save things", "first patients, after the staff" principle. The evacuation of the scene and the evacuation of materials in order, do not scramble to be the first, crowded each other, not to block the channel in the middle of the self-inflicted injuries, resulting in undue tragedy. When a fire occurs the person in charge of the ward and the volunteer firefighters should quickly arrive at the scene, organize the personnel to fight the fire and arrange for the alarm. When the fire people trapped, do not jump to escape, you can be set, sheets, curtains or other available ropes fastened, grab the rope and slide down to a safe place.
Once the fire accident occurred in the ward, the following plan should be implemented:
① First understand the fire direction, location, cause, burning material and so on.
② Section staff quickly divided, a person notify the hospitalized patients ready to evacuate, a fire alarm 119, a person notify the hospital, the urgent call to the hospital staff emergency assistance.
③ The fastest speed to cut off the power supply of the floor (floor power switch to the middle staircase)
④ Stabilize the mood of the patients and employees, orderly, organized patients, especially mothers, babies, quickly evacuated to a safe place.
⑤ To the effective time, grab out the flammable and explosive items, such as oxygen cylinders, alcohol, etc..
⑥ For the 119 fire department did not arrive before the volunteer firefighters and employees to the division dean or department head under the command of the full use of existing fire equipment in the hospital to fight.
⑦ on the shortest possible time by the dean in charge of the competent department and the relevant departments to report the fire, and organize the investigation of the cause of the fire and the aftermath of the work of the relevant personnel.
2, for the distribution room fire accident, the electrician should immediately cut off the power supply, with 1211 fire extinguishers or dry powder fire extinguishers to fight.
3, the warehouse fire accidents, warehousemen and volunteer firefighters should quickly cut off the power supply. When the fire spreads to the upper level, control the upper level, the lower level of defense; when the fire spreads to the level, the first control left and right, after the upper and lower defense. Control the upper and lower levels, with the upper level being the main one. Pay attention to the evacuation of materials, and is responsible for the fire department to introduce the number of materials stored, the presence of dangerous, flammable items and trapped people and so on.
Second, on the general fire department fire emergency measures
On the general fire department in the event of a fire, the closest department to the fire accident, the personnel should be quickly extinguished, the head of the department and the volunteer firefighters rushed to the scene, organizing the personnel to extinguish the fire and quickly call the police. At the same time, the organization of personnel to organize important, valuable and dangerous goods, and make preparations for evacuation.
Third, the hospital leadership of the fire fighting emergency measures
The hospital in charge of fire safety vice president should quickly rushed to the scene of the fire accident, called the relevant leaders to set up a fire-fighting leadership group, to understand the situation and carry out the appropriate division of labor. The fire accident to take while rescuing trapped personnel while organizing personnel to control the fire, transfer and evacuation of materials. To the fire department to introduce the fire occurred in the department or ward of the house structure, distribution, water sources, the danger of materials and trapped personnel.
Four, how to dial "119" fire phone
Once the fire, immediately dial "119" fire phone. Alarm do not panic, to report the fire occurred in the street (Youth Road, No. 288), the name of the unit, the name of the alarm and contact number and whether someone trapped and trapped number of people, to say clear section of the room with or without flammable and explosive substances (such as oxygen cylinders, alcohol, etc.). After the report, please do not rush to hang up the phone, wait for the police officer to say good and then hang up, such as he had any questions or did not hear clearly, please inform in detail.
Fifth, do a good job of preventing the prevention of disease in the future
Each section should do a good job of preventing the use of electricity safety, each section (post) to designate personnel usually do a good job of electricity and medical instrument performance safety checks and records (once a week), found that the problem promptly to the section chief or the supervisor of the Dean's report, no problem in a timely manner to record the case. The hospital monthly record of a check, the results of the inspection and personal system assessment and departmental year-end assessment linked.
In short, the hospital staff should be familiar with and master the above content and measures to actively rescue and relief after the accident, in order to reduce losses and win time, and pay attention to protect their own safety.
Equipment Emergency Plan 2
I. Abnormal leakage of pipelines
1, found that the equipment pipeline leakage or rupture immediately shut down;
2, leakage of wastewater will be all the way back to the wastewater treatment regulating pool reprocessing;
3, water to clean the ground and timely notification of electromechanical repairman;
4, Mechanical and electrical repairman immediately organize repair, recovery and start the equipment.
Second, the wastewater treatment facilities due to failure can not operate normally
1, when found that the wastewater treatment facilities have faults can not operate normally, immediately shut down to notify the repair;
2, the wastewater platform wastewater tanks usually required to have been kept in the half-tank below the tank to the tank can be full of water storage for 1 day;
3, if the equipment can not start for more than one day in a row.
Third, due to intermittent water volume abnormalities caused by abnormal water discharge
1, each shift operator regularly check the discharge of wastewater, when the discharge of abnormalities immediately adjusted;
2, when it is found that due to the intermittent water volume abnormalities, stop the discharge of the water discharged to the regulating pool to be reprocessed;
3, until discharge Requirements to stabilize and meet the standards, before they can be discharged to the outside.
Fourth, the treatment facility leakage
1, the abnormal leakage of hydrochloric acid tank
(1) found that the abnormal leakage of hydrochloric acid tank, immediately report to the logistics safety officer, and timely notification of maintenance;
(2) maintenance of timely treatment of failures, pay attention to the protective measures and safety protection;
(3) Maintenance can not deal with the failure, immediately notify the external tanker to store the remaining hydrochloric acid;
(4) the leakage of waste acid will be discharged through the pre-positioned acid discharge pipeline to the regulating pool for treatment;
(5) the use of pre-positioned gravel sand to deal with the overflow of acid on the platform;
(6) until the equipment troubleshooting to start up the equipment.
2, abnormal leakage of wastewater tanks and excessive water overflow
(1) found leaking and overflowing wastewater tanks, immediately notify the maintenance;
(2) timely handling of the fault, the same day can not be dealt with the failure of the tanker trucks should be immediately notified of the storage of wastewater;
(3) leaking wastewater will be discharged through the pre-positioned pipeline to the wastewater system conditioning tank treatment;
(4) Flush the platform floor with water and discharge the water to the conditioning pond for treatment;
(5) Start the treatment equipment after equipment troubleshooting.
3, abnormal leakage of other treatment facilities
(1) other equipment leakage of the wastewater system, notify the maintenance;
(2) untreated wastewater will be returned to the regulating pool through the drainage ditch to repeat the treatment;
(3) the equipment can only be repaired to start the wastewater system.
In order to effectively prevent, timely control of the elimination of the hazards of sudden accidents, to minimize the loss of equipment system failure, to maintain the stability of the hotel, to ensure that the smooth operation of the hotel's various operations, combined with the actual situation of the hotel, the development of this emergency plan, I hope that all employees to follow the implementation of the emergency plan.
One. Equipment major emergency repair
The departments using the equipment in the event of a major failure, should be the first time to report to the Ministry of Engineering, by the engineering manager according to the equipment failure, and immediately arrange for the appropriate professional and technical personnel to carry out emergency repairs at the first time as soon as possible to complete the task of repairing and restoring the normal business and to take preventive measures.
Two. Equipment major failure emergency procedures
1. Handling equipment system major failure, on-duty equipment operators, supervisors should remain calm, analyze the cause of the failure, v. speed to take the appropriate emergency measures, and immediately level by level (manager, vice president in charge of the general manager) upward report.
2. Engineering manager and the use of departmental leadership **** with the consultation, coordination, emergency measures to control the scope of the impact, while analyzing the cause of the failure, find solutions and preventive measures.
3. Equipment maintenance, professional supervisors need to be on the scene for technical supervision, engineering professionals should be in accordance with the equipment specification for maintenance, maintenance site should be set up a conspicuous warning signs to avoid accidents.
4. In order to ensure the safety of the premise, to do a good job of emergency failure of the temporary processing work:
A. Municipal power outage, should start the hotel backup power generation system for power supply.
B. Subterranean puddle sewage submersible pump failure, should use temporary pumping sewage.
C. When the water supply equipment fails, the backup pump should be started for water supply.
D. When the central air-conditioning unit fails, the backup central air-conditioning unit should be started.
5. In case of leakage of water pipes, oil pipes and steam pipes, temporary blocking should be done first. After that, level by level (supervisor, manager, vice president in charge, general manager) to report upward, and take a thorough sealing or replacement of the pipeline technical processing.
6. Emergency accident scene if a large amount of smoke or lead to fire risk, should immediately report to the security fire center. Emergency call temporary exhaust equipment for smoke exhaust, and according to the accident wearing gas masks or oxygen respirators into the scene to deal with.
7. When the manned elevator (especially the passenger elevator) emergencies (trapped, open the door to run, slippery ladder, rushing, pinching and injuries, etc.), the rescue methods and procedures are detailed in the hotel elevator rescue emergency plan.
8. Handling of power outages, after confirming that it has been dealt with, the insulation test must be done again before sending power.
9. After the accident, all protective equipment should be cleaned, and staff should clean up personal hygiene. Engineering Department should organize relevant professionals to analyze the cause of the accident, put forward improvement measures, make a summary, and record for the record.
Equipment Emergency Response Plan 4In order to ensure the normal operation of the fracturing equipment and to take timely and correct measures when an accident occurs during the construction operation, to prevent further expansion of accidental damage and to reduce the accidental damage to a minimum, this program is hereby formulated. This program has been developed.
I. Preventive measures before construction
1. Check whether the fracturing equipment, instruments, monitors and sensors are working properly, and whether the oil and water in each part are in accordance with the regulations, and check each point and each item in accordance with the route of the inspection tour. Operate the equipment according to the operation regulations.
2. Check whether the emergency engine shutdown device on the stage is reset.
3. Check that there are no obstacles and easy products around the machine.
4, the construction process operator should do the tour to check the vehicle operating conditions, the operating parameters, not off duty, follow the instructions.
Second, the construction of emergency measures
(a) pump truck failure
1, the construction of the pump head fracture, immediately stop the pump as a whole, close the wellhead valves, put off the pressure of fracturing high-pressure pipeline pressure, shut down the car plug valves, adjusting the displacement of other pumps, according to the construction of the displacement can be achieved to adjust the construction parameters, such as sand ratio. According to the achievable construction displacement, adjust the sand ratio and other construction parameters; if the lower limit of construction displacement is still not reached, the overall parking rectification.
2. At the beginning of the injection of pre-positioned liquid, the hydraulic end of the empty pump phenomenon was found, all the vehicles stop construction, circulate the pump, and continue construction after rectification.
3, the late injection of pre-liquid and sand replacement stage, found that the hydraulic end of the empty pump phenomenon is serious, so the car should immediately stop the pump, close the car plug valve, adjust the displacement of other pumps, according to the construction displacement that can be achieved, adjust the sand ratio and other construction parameters; if it still can not reach the lower limit of the construction of the displacement requirements, the whole stopping to rectify.
4, when the occurrence of diesel engine flying, should immediately stop, when the normal parking invalid should immediately start the emergency stop device parking.
5. When the water temperature of the engine of a single car exceeds 90℃, the oil temperature of the transmission box exceeds 100℃, and the lubricating oil temperature of the fracturing pump exceeds 70℃, the operator of the pump car should report to the commanding officer immediately to appropriately lower the gear of the transmission box of the car, adjust the displacement of the other pump cars, and adjust the parameters of the sand ratio and other construction parameters according to the construction displacement that can be achieved; if the construction conditions do not allow the downgrading of the gears to be called for work, the operator should be arranged to monitor the changes of the mechanical parameters of the car closely. Monitoring the changes in mechanical parameters of the car.
6. When the water temperature of the engine exceeds 95℃, the oil temperature of the transmission box exceeds 110℃, and the lubricant temperature of the fracturing pump exceeds 80℃, the vehicle should be shut down immediately for inspection. Close the plug valve of the vehicle and the low-pressure water valve, adjust the displacement of other pumps, and adjust the sand ratio and other construction parameters according to the construction displacement that can be achieved; if the lower limit of the construction displacement is still not reached, the whole vehicle should be stopped for rectification.
7, when the single engine parts of the lubrication pressure suddenly drop, or mechanical abnormal sound should immediately stop and check.
8, caused by the external environment of the shutdown, the external environment must return to normal before starting the machinery.
9, by the mechanical failure caused by the very stop, must be excluded from the mechanical failure before starting the machinery.
(B) sand mixing truck failure:
1, injection of pre-positioning liquid stage, sand mixing truck leakage, the overall stop pump, rectify the equipment.
2, injection of sand carrying liquid stage, sand mixing car leakage, immediately stop the sand, in order to ensure the safety of personnel and equipment and the external construction environment under the conditions of the top finish rectification equipment.
3, the construction process, the proportion of the pump or spiral sand conveyor and so on out of control, immediately stop the sand replacement, replace the completion of rectification equipment, adjust the construction program.
4. During the construction process, the liquid supply system of the sand mixing truck was out of control, immediately stop the sand, connect the liquid supply pipeline of the pump truck to the liquid supply tank with high liquid level, and take over.
(C) Instrument truck failure:
1, generator failure, immediately start the backup power supply, rectify the power generation equipment after the end of construction.
2, acquisition system failure, can not be restored in a short time, should immediately closely monitor the fracturing pump single car pump pressure, through the sand mixing truck to grasp the construction parameters, and quickly discuss the next step of the process measures with the site supervision and designers.
Equipment Emergency Plan 5
First, the organization and responsibilities
The hospital set up a special equipment accident emergency response leading group, set up an office and expert group. Office located in the Ministry of Inspection and Management. The municipalities set up their respective emergency technology disposal team. (See attached 1, 2, 3, 4)
(a) Organization:
1, the leading group
Leader: Dean.
Vice Chairman: Vice President, Assistant President.
Members: the relevant functional departments of the hospital, the head of the business sector and the relevant personnel of the municipalities.
2, the Leading Group Office
Director: Vice President
Deputy Director: Assistant Dean, head of the Department of Inspection and Management
Members: Inspection and Management Department and the heads of the relevant functional departments
3, the special equipment emergency response expert group
4, the district special equipment emergency response team
(2) Responsibilities:
1, the leader: responsible for coordination with the Provincial Bureau of Quality and Technical Supervision and the Provincial Special Equipment Emergency Disposal Leading Group, the occurrence of serious accidents, supervise the hospital functional departments and the district special equipment emergency disposal personnel according to the emergency disposal of special equipment accidents in a timely and effective manner to carry out the work; is responsible for Accident investigation, identification report approval.
2, deputy head: to assist the head of the work, when the head of the group is out on business, acting head of the duties, the occurrence of serious accidents, to the scene to participate in the accident disposal, the organization of the emergency technical processing team to determine the technical disposal measures.
3, the leading group office: responsible for the preparation of emergency response plan for special equipment accidents; coordination and organization of the hospital on the disposal of special equipment accidents. Check the implementation of emergency response plan for special equipment accidents. In the event of serious accidents, the scene to assist the deputy head and each district special equipment accident emergency disposal group to develop technical measures.
4, the district special equipment accident emergency disposal group: the establishment of emergency technical processing team (see Annex 4 for a specific list), the head of the hospital designated personnel as members of the 3 to 5 members, with the qualification of the inspector or the corresponding technical expertise of the technical staff. According to the needs of emergency response to special equipment accidents, timely dispatch of members of the emergency technical processing team for the local Quality and Technical Supervision to provide technical support for the disposal of accidents proposed technical processing measures. The establishment of local special equipment design, manufacturing, installation, maintenance units composed of special equipment accident emergency disposal linkage unit directory (see Annex 5 for a specific list).
5, the hospital office, the district, station integrated room: responsible for receiving the police and logistical support work, is responsible for the deployment of resources within the hospital disposal, to provide emergency response to the accident disposal of materials, equipment, vehicles, etc., to assist and cooperate with the local Quality and Technical Supervision to do a good job of the aftermath of the work. The company's main goal is to provide the best possible service to its customers.
Second, receive the alarm and emergency response
(a) accident report
1, the hospital all personnel: all personnel in the hospital in the receipt of any aspect of the special equipment accident report (or suspected accidents), should be immediately to the person in charge of the department and the hospital emergency response leadership group Office report; under special circumstances, can also report to the higher level of quality and technical supervision departments and relevant departments. No person in the hospital shall conceal or suppress the accident report under any pretext.
2, the department head: the department head in the accident report must be reported immediately after receiving the report by level;
(special equipment accident emergency response commonly used communication contact mode see Annex 6).
The content of the accident report should include: the accident occurred unit (or the owner) name, contact person, contact phone number; the location and time (year, month, day, hour, minute); equipment name; accident category; casualties, economic losses and the accident overview.
For the emergency situation, the accident details are not known in time, the relevant departments should be reported at the same time, through various means to confirm, understand, and according to the development of the accident and the disposal of the situation in a timely manner to supplement the renewal of the report.
3, the Office of the Leading Group and the municipalities of the district, the station integrated room received an accident alarm, must quickly do a good job of telephone records, telephone records should include: the name of the alarm, the contact number, while recording the accident location, time, casualties and damages. Received by the leading group office of the police, the situation should be quickly reported to the special equipment accident emergency response leading group leader, while notifying the relevant personnel. By the municipal special inspection station integrated room to receive the police, the situation should be quickly reported to the department head and the leading group office.
4, the district special equipment accident emergency disposal group should be quickly on the accident level of preliminary determination, contact the special equipment accident emergency disposal linkage unit, and at the same time sent to the scene of the accident to participate in the accident disposal.
5, the leading group office is responsible for the handling of the accident tracking and inspection. For serious accidents, the accident and the handling of the situation immediately reported to the head of the leading group of emergency response to special equipment accidents, and immediately coordinate the organization of the relevant personnel rushed to the scene of the accident.
(B) the basic response procedures
1, rushed to the scene of the accident scene, should immediately get in touch with the accident unit or the owner and the special equipment accident emergency disposal linkage unit to assist the local Quality and Technical Supervision to do a good job in the accident technical processing; local Quality and Technical Supervision did not come to the scene, it should be aware of the accident Occurrence of the situation, carefully check the scene, and the above information will be fed back to the leading group office or the head of the emergency disposal team of special equipment accidents in various districts.
2, the leading group office or district special equipment accident emergency disposal team in charge of the information feedback and the actual situation on the scene, the serious accidents above the accident immediately to the occurrence of accidents in the center of the special equipment emergency response to the leading group leader and the location of the Quality and Technical Supervision Bureau report.
(C) the main content of the scene of work
Accident scene emergency disposal working group at the scene of the accident to implement the accident scene emergency disposal. Should be based on the principle of minimizing casualties, reducing accidental losses, and strictly preventing the spread of the accident (pollution). Assist the accident unit to carry out self-help. Determine the cause of the accident and the possible hazards, take measures to prevent the expansion of the accident.
1, according to the equipment and the characteristics of the accident, the accident is likely to further expand to make a preliminary judgment. Advance disposal team rushed to the scene of the accident, should be as soon as possible to make an initial assessment of the basic situation of the accident, including the scope of the accident and the trend of the expansion of the accident hazards, as well as casualties and property damage.
2, to determine the accident-related special equipment, access to relevant equipment data, information; inspection and testing reports, and, as needed, to provide equipment to use the medium of the relevant technical information.
3, for the accident triggered or may be triggered by secondary disasters, preventive measures and start the relevant emergency plan recommendations. According to the accident occurred in the structure of special equipment, process characteristics and the occurrence of accidents in the category, the rapid development of the necessary technical testing, to confirm the type and characteristics of hazardous materials, the development of rescue and disposal of `technical programs, and take targeted safety and technical measures to effectively control the expansion of the accident in a timely manner, to eliminate the hazards of the accident and the impact, and to prevent the possible occurrence of secondary disasters.
4, special equipment accident emergency disposal leading group decided to start the plan, each district special equipment accident emergency disposal group should be quickly sent to emergency technical processing team together with the special equipment accident emergency disposal linkage units, with the local Quality and Technical Supervision Bureau or the accident investigation team to identify the nature of the accident, the type of special equipment, the scope of the impact and the consequences may continue to be caused by the identification of a reasonable Technical treatment and disposal program. For serious accidents, the technical treatment and disposal program, reported to the special equipment accident emergency response leading group for finalization. For general accidents and serious accidents, actively cooperate with the quality and technical supervision of the place where the accident occurred, according to the special equipment emergency measures (see annex 7, 8, 9, 10, 11, 12, 13, 14,) to carry out emergency response to accidents, and for serious accidents, in the local quality and technical supervision of the unified organization, under the coordination, the rapid implementation of the disposal work, in order to determine the level of accidents, coordination, command and disposal of accidents Provide technical support to prevent further expansion of the accident, minimize casualties and economic losses, while doing a good job in the accident scene forensics. At the same time, by the special equipment accident emergency disposal leading group deputy leader together with the leading group office and the district special equipment accident emergency disposal group of relevant personnel immediately rushed to the scene of the accident, to determine the technical measures to assist in the accident disposal.
5, for the tank leakage may lead to serious secondary disasters (such as explosions, etc.), the proposed evacuation of personnel. The occurrence of flammable and explosive toxic media boiler pressure vessel, pressure piping leakage, should immediately organize professional staff to take measures to dispose of the leakage. Organization of firefighters to extinguish the fire and the occurrence of leakage of gas, liquid disinfection or dilution, the fire accident occurred in the pressure vessel and its surrounding affected pressure vessels, spray cooling.
6, it is recommended to take relevant technical measures, such as equipment emergency plugging.
7, according to the nature and characteristics of the accident, the proposed medium discharge, pressure relief and other technical measures; can be inverted, the accident equipment and the impact of other hidden equipment internal medium inverted to safe and reliable equipment, for mobile equipment (such as biphenyl, liquid chlorine, liquid ammonia, sulfur dioxide cylinders), after the relevant professionals determined that it can be moved, the organization has the knowledge of safety and protective equipment with protective knowledge and personnel, will be moved to the equipment, the equipment, the equipment, the equipment, the equipment, the equipment, the equipment, the equipment, the equipment, the equipment, the equipment, the equipment, the equipment, the equipment, the equipment, the equipment and the equipment. The personnel with knowledge of safety protection and equipped with protective equipment, the equipment will be moved to the place where it can be handled for disposal.
8, according to the medium toxicity, put forward the prevention and disposal of poisoning recommendations; rescue victims. Timely, scientific, orderly on-site rescue or safe transfer of victims, as far as possible to reduce casualties, reduce property damage caused by the accident. To the scene personnel (including disposal personnel) informed of the accident may cause harm and self-protection knowledge.
9, the need to use social forces (personnel, equipment, vehicles, etc.) recommendations;
10, the rescue of professional and technical operations to provide technical guidance (including the selection and use of rescue tools).
(D) the center of the accident working group personnel safety protection
Participate in emergency rescue and disposal of staff, pay attention to personal safety, should be equipped with the requirements of the safety protection supplies and the necessary safety equipment, the scene of the accident should be in the professional sector under the guidance of professionals to carry out the necessary technical processing.
(E) special equipment accident relief linkage business
For the nature and characteristics of special equipment accidents, the use of appropriate social forces, the implementation of the policy of counterparts to deal with. With the help of professional operators (rescue team), professional rescue equipment and rescue technology, emergency response to the accident, as far as possible to reduce the risk of accidents, improve the efficiency of disposal, reduce the risk of disposal.
Third, special equipment emergency measures
1, the elevator accident emergency measures (see Annex 7);
2, lifting machinery accident emergency measures (see Annex 8);
3, the field (plant) within the motor vehicle accident emergency measures (see Annex 9);
4, large amusement rides accident emergency measures (see Annex 10);
5, passenger ropeway accident emergency measures (see Annex 11);
6, liquid chlorine cylinder leakage accident emergency measures (see Annex 12)
7, liquefied petroleum gas car tanker accident emergency measures (see Annex 13)
8, liquid ammonia cylinders Leakage of liquid ammonia cylinder emergency measures (see Annex 14)
Fourth, plan management and revision
(a) The plan reported to the provincial Quality and Technical Supervision Bureau and the local municipal Quality and Technical Supervision for the record.
(b) the plan by the leading group of special equipment emergency response office is responsible for revising every two years, after the occurrence of special equipment accidents, the plan and emergency measures for the necessary review and update.
(C) the plan in accordance with the provincial (municipal) Quality and Technical Supervision Bureau and the Fujian Provincial Emergency Disposal of Special Equipment Accidents leading group of the requirements of regular drills.
(D) This plan is implemented since the date of publication.
;