Three, the use of
The agitator is mainly used in water treatment centers or construction sites, or large-scale food processing companies, the need for further processing of food materials, or the addition of water to combine the mixing of agents, chemical plants are more common. Construction materials can be mixed and stirred to provide the required materials for the project, which can save labor costs and improve the progress of the project. Yancheng Qilian Electric Power Equipment Co., Ltd. use stirrers to stir the medium, can accelerate the heat and mass transfer of the medium, can accelerate the chemical reaction, so the stirrer is widely used in petrochemical equipment. Qilian stirrer type model quite a lot, the type of stirring medium is also very wide, according to the physical properties of the stirring medium can be divided into liquids, solids and gases, of which the majority of liquids. Water is one of the most common liquids, its viscosity is very low, mixing resistance is also small. Liquid mixing medium viscosity is also high, such as butter, at room temperature up to 1 000 000 cP (viscosity, 1 cP = 10-3Pa?s, the same below). Stirring too much gas in the liquid will foam, the simplest stirring is to mix two mutually soluble liquids. Generally speaking, the mixing device consists of an electric motor (motor), a mixing shaft, an impeller, and sometimes a stand, a reducer, etc. are assigned to it for ease of use. When we design the agitator, the goal we pursue is the balance between the agitator process, machinery and cost. Our designers will fully consider the actual needs of the agitator users, the scope of application of the agitator, to design the most cost-effective agitator, so that customers do not worry about the quality of the agitator, maintenance and so on.