1) the various production and operation activities of the enterprise are inseparable and should be considered in a unified manner;
2) the entire production and manufacturing process is essentially a process of information collection, transmission and processing and handling.
CIMSdefinition: CIMS is through computer hardware and software. And the integrated use of modern management technology, manufacturing technology, information technology, automation technology, systems engineering technology. The enterprise production of all processes related to people, technology, business management elements and their information and logistics organic integration and optimization of the operation of the complex system.
Therefore, the enterprise as a unified whole, must be from a systematic point of view, the overall point of view of the extensive use of computers and other high-tech, accelerate the collection of information, transmission and processing of processing, improve efficiency and quality, so as to improve the overall level of enterprises.
Manufacturing industry's various production and management activities, from people's manual labor into the use of mechanical, automated equipment, and then the use of computers is a big leap, and from the computer to run a single integrated operation is a bigger leap. As the latest development of manufacturing automation technology, the revolutionary achievements of industrial automation, CIMS represents the highest level of integrated automation in today's factories, and is known as the factory of the future.
The picture shows a stacking robot at work. In the future, operators in factories will be replaced by these robots, realizing unmanned factories.
It has been more than 20 years since the concept of CIM was introduced, and over the past 20 years, the concept of CIM has spread from developed countries such as the United States to developing countries, and it has been expanded from the typical discrete machinery manufacturing industry to continuous or semi-continuous manufacturing industries such as chemical industry and metallurgy.
CIM concept has been accepted by more and more people, to guide the philosophy of factory automation, there are more and more factories according to the CIM philosophy, the use of computer technology to achieve information integration, built a different level of computer integrated manufacturing system.
CIMS and computer integrated automated manufacturing system is synonymous with the latter is CIMS in China's early another way to call, although more colloquial, but therefore unable to express the connotation of integration, used less.
CIMS is the integration of multiple subsystems with different degrees of automation, such as management information system (MIS), manufacturing resource planning system (MRPII), computer-aided design system (CAD), computer-aided process design system (CAPP), computer-aided manufacturing system (CAM), flexible manufacturing system (FMS), as well as numerical control machines (NC, CNC), robots and so on. CIMS is developed on the basis of these automation systems, it is based on the needs of enterprises and economic strength, the various automation systems through the computer to achieve information integration and functional integration. Of course, these subsystems also use different types of computers, and some subsystems themselves are integrated, such as MIS to achieve the integration of a variety of management functions, FMS to achieve the integration of processing equipment and material handling equipment and so on. But these integrations are in the smaller local, and CIMS is for the integration of the whole factory enterprise. CIMS is oriented to the whole enterprise, covering a variety of business activities, including production and management, engineering design and manufacturing of all aspects, that is, from the product offer, accepting the order to start, through the planning, design, manufacturing until the product factory and after-sales service and so on the whole process.
In the current global economic environment, CIMS has been given a new meaning, that is, the modern integrated manufacturing system (Contemporary Integrated Manufacturing System). It combines information technology, modern management technology and manufacturing technology and applies them to all stages of the whole life cycle of the enterprise, realizes the integration and optimal operation of logistics, information flow and value flow through information integration, process optimization and resource optimization, and achieves the integration of the three elements of human (organization and management), operation and technology, so as to strengthen the T, Q, C, S, E of the new product development of the enterprise, and thus to enhance the market Strain capacity and competitiveness.
(I) The functional structure of CIMS
Functionally, CIMS includes the three main functions of design, manufacturing, and operation and management of a manufacturing enterprise, and to integrate the three, it also requires a supportive environment, i.e., distributed databases and computer networks, as well as system technologies to guide the integrated operation.
1. Four Functional Subsystems
(1) Management Information Subsystem
(2) Product Design and Manufacturing Engineering Design Automation Subsystem
(3) Manufacturing Automation or Flexible Manufacturing Subsystem
(4) Quality Assurance Subsystem
2. Two Support Subsystems
(1) Computer network subsystem
(2) database subsystem
(2) the connotation of CIMS integration
1. The connotation of CIMS integration
Integration and connectivity is different, it is not simply to connect two or more units together, it is the original no connection or not closely linked to the composition of the unit for the function of a certain, tightly linked to the new system. The integration of two or more functions involves the interaction between two or more functions. Integration belongs to the scope of system synthesis and system optimization in system engineering.
1) Integration of system operating environment
2) Integration of information
3) Integration of application functions
4) Integration of technology
5) Integration of people and organization
Xi'an Xintong Science and Technology Development Co.
─ Shaanxi Province CIMS Engineering and Technology Center
Xi'an Xintong Technology Development Co., Ltd. is a high-tech company dedicated to the development and sale of quality management software for production enterprises, relying on the Shaanxi Province CIMS Engineering and Technology Center (National Quality Engineering and Technology Center), with senior professional and technical team. The company is mainly composed of experts and scholars who have many years of research and implementation experience in enterprise quality software. The product technology originates from the strong basic research results, and we have developed our own independent product---XinTong IQS Quality Integration System. It has been successfully operated in Xi'an Aircraft Company, Shaanxi Liaoyuan Aviation Machinery Manufacturing Company, Xianyang Caihong Group Company, Chengdu Yaguangdian Electronics Company Limited, Henan Ancai Hi-Tech Group, and many other large-scale enterprises.
Xin Tong IQS is a high-end integrated quality control system, a set of systems to help global business groups to control the process comprehensively with high efficiency, high precision and high productivity, and is the basic application platform for enterprises to implement the 6 Sigma strategy. It allows users to adjust the production process more accurately, resulting in continuous improvement of product and service quality. It follows the DMAIC model of 6Sigma application, which is not just a general 6Sigma teaching software tool for data collection and charting, but a fully real-time web-based application that collects and links data from different locations and devices in real time, generates charts, monitors, analyzes, communicates, exchanges, and reports - all from a single, easy-to-use software tool. -All of these functions are displayed by a simple interface that allows the user to see at a glance the accuracy of any shop, department, workgroup, and any process, and to monitor the quality of the production process in an integrated way for continuous improvement.
Thinkitsu IQS enhances teamwork and productivity through web-based resources. With Cygnus IQS, organizations will be fully integrated, engaging the entire workforce in quality activities, and you will see a reduction in manufacturing costs and an increase in customer satisfaction with unlimited potential!
XinTong IQS is also a powerful tool for university faculty. It can be used not only in enterprises, but also as a teaching experiment application software for students studying the course of "Quality Studies" in each business administration school or college of higher education, so that students can understand the quality management process of modern enterprises vividly and vividly without going out of the school.
Shaanxi CIMS Engineering and Technology Center:
Shaanxi CIMS Engineering and Technology Center was founded in July 1999, the technical support unit is Xi'an Jiaotong University CIMS Research Institute, Manufacturing Systems Engineering State Key Laboratory, the National 863/CIMS "Quality System Automation Engineering Laboratory ".
The Engineering Center has 4 professors, 2 associate professors, 2 lecturers, 2 engineers and more than 40 postgraduates. The center has been committed to the research of manufacturing informatization engineering for many years, and has undertaken more than 20 national 863 and Natural Science Foundation projects, won a number of national and provincial science and technology awards, and achieved a large number of scientific research results and scientific and technological products, and formed a manufacturing informatization engineering innovation platform featuring digital management and integrated quality management.
The manufacturing resource planning system and integrated quality management system developed by the Engineering Center have been successfully applied in manufacturing enterprises such as Xi'an Standard Joint Stock Company, Xi'an Aircraft Manufacturing Company, Xifei International, Xianyang Deflection, Xianyang Rainbow, Hanzhong Liaoyuan, Xi'an Aero Engine Company, and Dongfang Turbine Company.
The Engineering Center has provided information technology planning, consulting and training for a number of provincial and foreign enterprises, including Baoji Petroleum, Aerospace 504, Weihe Chemical, Ning Coal Group, Shandong Zhaoyuan and so on.
Results
l Research and application results of ERP and production process management
The company has undertaken the national 863 key project "Research and Development of ERP System Suitable for China's National Condition", 863 key project "SCM/CRM/CRM/CRM", "SCM/CRM/CRM/CRM/CRM" and "SCM/CRM/CRM/CRM". SCM/CRM/ERP integrated system research", 863 project "ERP, PLC cost planning, ABC costing method integration research" and other projects of research and development. The main research and application results are:
Beginning from the connotation connection between enterprise logistics and value flow, it puts forward the model of double closed-loop control system of logistics and capital flow with the main production plan and cost plan as the main line;
Established the integrated system architecture of ERP system with PLC and ABC thinking method, and established a system model adapted to the integration of ERP and ABC in discrete manufacturing industry;
Established a system model adapted to the discrete manufacturing industry;
Established a system model of ERP and ABC integration. ABC integrated system model;
Developed the corresponding ERP, CRM, SCM and other system software, and obtained four software copyrights;
The developed system has been promoted in dozens of enterprises in Guanzhong industrial zone, and successfully applied in Xianyang Deflection Group, China Standard Sewing Machine Group and many coal enterprises, and achieved good economic benefits.
The company has undertaken a number of national research and development projects, such as "Research and Development of Integrated Quality Management System for Aircraft Manufacturing Based on Quality Workflow Driven by National Defense Science and Industry Commission", "Research on Quality Management Technology and Quality Information System for the Whole Life Cycle of Products" by National 863 Commission, etc. The company has also undertaken a number of national research and development projects. National level research and development projects. The main research and application achievements include:
Proposed the integrated manufacturing quality system architecture and methodology with process control as the core, PDCA cycle as the characteristics, and product lifecycle oriented;
Developed the corresponding integrated quality system software, and gained the copyright of software works for 10 items;
The system has been used in Chengdu Aircraft Corporation, Xifei Aircraft Corporation, Dongfang Automobile Turbine Factory, Rainbow Group and other aircraft manufacturing companies, including Chengdu Aircraft Corporation, Dongfang Aircraft Corporation, Dongfang Turbine Factory, Rainbow Group and other aircraft manufacturing companies, Dongfang Steam Turbine Factory, Rainbow Group, Hanzhong Liaoyuan Aviation Machinery Factory and other dozen of large-scale aviation enterprises and equipment manufacturing enterprises have been widely used.
l Achievements in Basic Research
The company has undertaken four projects of the National Natural Foundation of China (NNFC), including "Research on the Theory and Methods of Information Quality Control in Digital Manufacturing", and carried out research on the basic theories of manufacturing informatics and manufacturing information engineering, and the main research results are as follows.
Proposed seven quality dimensions of manufacturing information, and solved the problem of measuring the quality of manufacturing information from the levels of static information quality, dynamic information quality, and the quality of primary and secondary regeneration information;
Preliminarily proposed the basic theory and basic methodology for the evaluation and control of the quality of manufacturing information in the digitalized manufacturing from the aspects of the connotation and definition of the quality of information.
Manufacturing informatization project
The so-called manufacturing informatization is the use of information technology to collect, transfer, and process relevant information in the whole life cycle of manufacturing products, and realize the progress of manufacturing industry driven by information technology.
The U.S. future manufacturing technology guide that manufacturing information system is the future of manufacturing technology, one of the six key technologies, is in the manufacturing technology competition to seize the high ground in the breakthrough. Strengthen the basic research on manufacturing information technology and core technology research has become China's future a period of high-speed development of the manufacturing industry is an inevitable choice.
The main content of manufacturing informatization includes digital design, digital manufacturing, digital management, integrated quality system, etc.