Universal serial interface network-compliant embedded module with built-in TCP/IP stack, capable of realizing arbitrary and transparent conversion between user's 3 interfaces: serial, Ethernet, and wireless network (WIFI).
Serial to WIFI Module, Serial to Ethernet Module, Ethernet to WIFI Multi-function WIFI Module, Serial Server Module, allows your serial devices to be easily networked with fully transparent bi-directional data transmission, guaranteeing the highest level of ease of use and compatibility. 2. Module integrated 10/100M adaptive Ethernet interface, serial communications up to the highest baud rate of up to 230.4Kbps
3. Using the world's top network chip supplier Raytheon ralink program, the raw materials are used in the TDK//Murata and other big-name manufacturers, laying the foundation for stability and reliability
4. Reliable system core suitable for the security and long-term operation of the System applications
5. Small size: 40*29 (smaller than one-third of a credit card)
6. Operating temperature: Industrial: -25~75°C.
7. Built-in 360M MIPS CPU, 16M RAM, 4M FLASH and wireless baseband and RF front-end as well as a variety of peripheral buses
8. CE and FCC certified, supports IEEE 802.11 b/g/n, supports Transparent Protocol data transfer mode
9. Supports most WIFI encryption methods and algorithms, WEP/WAP-PSK/WAP2-PSK/WAPI, encryption type WEP64/WEP128/TKIP/AES
10. Provides AT+ command set configuration, provide friendly web configuration page, configuration through the web page
11. Optional built-in on-board or external antenna
12. Support wireless work in AP mode and node (Station) mode, the real hardware AP, support for iphone cell phones and android system and so on all the WIFI connection, support AP and station online at the same time
13. Optional TCP Server/TCP Client/UDP working mode, support for network protocols: TCP/UDP/ARP/ICMP/HTTP/DNS/DHCP
14. Support for DHCP to automatically obtain IP, support for working in the AP mode for the slave device to assign the IP
15, serial port rate adjustable, the highest support 230400
16, strong technical support, can provide customized needs
1 WiFi remote control planes, cars and other toys in the field;
2 WiFi network radios, cameras, digital photo frames;
3 medical instruments, data acquisition, handheld devices;
4 WiFi fat scale, smart card terminal; home intelligence; LED lighting fixtures
5 Instrumentation, equipment parameter monitoring, wireless POS; power switch, in-wall AP, only switch socket.
6 Industrial control, handheld detector. Pin No Signal Type Description 1 VCC5V Supply Voltage,5V+/-10% 2 GND Analogue Ground 3 WIFILED WLAN Activity LED 4 VO3.3 3.3V Output (Suuport Atmost 300mA ) 5 LINK1 10/100 PHY Port #1 activity LED 6 N/A Reserved 7 N/A Reserved 8 GPIO0 General GPIO Reserved 9 GPIO1 General GPIO Reserved 10 ES/RST Exit transparent transmissionmode/Restore factory value 11 TXOP1 10/100 PHY Port #1 TXP 12 TXON1 10/100 PHY Port #1 TXN 13 RXIP2 10/100 PHY Port #2 TXP 14 RXIN2 10/100 PHY Port #2 TXN 15 RXIN1 10/100 PHY Port #1 RXN 16 RXIP1 10/100 PHY Port #1 RXP 17 TXON2 10/100 PHY Port #2OXN 18 TXOP2 10/100 PHY Port #2OXP 19 GPIO2 General GPIO Reserved 20 UART_RX UART RXD. 21 UART_TX UART TXD. 22 GPIO3 General GPIO Reserved 23 LINK2 10/100 PHY Port #2 activity LED 24 GPIO4 General GPIO Reserved 25 WPS/RST WiFi Protected Setup /Restore factory value 26 GPIO5 General GPIO Reserved 27 VO1.8 1.8V Output (Suuport Atmost 300mA) 28 VCC5V Supply Voltage. 5V+/-10%