2. The colors printed on the screen or printer cannot be required to be printed. When making, customers must refer to the percentage of CMYK chromatogram to determine the filling color. At the same time, it should be noted that the CMYK chromatograms produced by different manufacturers are affected by factors such as paper used, ink type and printing pressure, and the same color block will be different.
3. The same document will be printed at different times, and the color difference will be within 10%, which is a normal phenomenon (due to different ink control each time). If there are old documents to be printed, in order to avoid excessive color difference, we can only refer to the digital color samples produced by our company.
4. Please try to avoid the combination of dark color or full-page color in color matching, otherwise it is easy to produce back printing after printing and cutting.
5. The color of shading or base map shall not be less than 10%, so as not to be presented when printing the finished product.
Extended data:
Matters needing attention in business card design
1. The printing color of the finished product cannot be required by the screen or printing color. When making files, the fill color must be determined according to the percentage of CMYK color cards.
2. When the same drawing file is printed at different times, there will be some differences in color, and it is normal that the color difference is within 10%.
3. The color of shading or base map shall not be less than 5%, so as to avoid being rendered when printing the finished product.
4. Images and photos are made in CMYK mode and saved in TIFF file format. Do not enter in PSD file format. If you use CoreIDRAW to design business cards, please fill in all the input images, objects of POWERCLIP, separated falling shadows and use transparent or filter materials, and then flip the bitmap again.