Smyrn’s tips for home water purifier installation instructions
Smyrn’s home water purifier is a device that integrates multiple technologies. Smyrn’s home water purifier can A device that directly converts tap water into ultrapure water. The purified water produced by a household water purifier is fresher, more hygienic, and safer than bottled water.
Technical guidance for the installation of household water purifiers
1. Household water purifiers should be installed in a dry place as much as possible (a 30cm deep ditch should be built around the machine room to facilitate the drainage of waste water) , because being in a humid environment for a long time will cause damage to electrical equipment and components.
2. The system should be placed in a location that is convenient for operators to enter and maintain, and there should be sufficient space around it.
3. When selecting the installation location and time, try to consider the appropriate location of the entire system and comply with the operation sequence of the process flow.
4. After the reverse osmosis pre-treatment and the host are in place as required, use UPVC, ABS or stainless steel pipes to connect them. A sewage outlet (security filter entrance) should be installed at the inlet of the host.
5. Each branch pipe network is an important part of the system, and the installation must be carried out by a professional installation company. The pressure loss caused by the branch pipe network is not what the system serves.
6. The installation of electrical appliances must be carried out by qualified electrical technicians and workers, and there must be reliable grounding.
7. Users are requested to reserve 380V and 220V main terminals in the main control room.
8. The installation location of household water purifiers should ensure that the temperature is not higher than 45℃ in summer and not lower than 4℃ in winter, otherwise it will cause irreparable damage to the equipment.
9. The height of the pure water collection point (such as the entrance of the pure water tank) should not be 1.5m higher than the pure water outlet of the equipment. Otherwise, back pressure will be generated on the reverse osmosis membrane, causing the reverse osmosis membrane to be unrecoverable. of damage. It is recommended to consider installing a check valve in the pure water pipe during engineering installation, which can effectively prevent the membrane from being under back pressure.
10. No valves or any devices that hinder the outflow of pure water shall be installed in the pure water outlet connecting pipeline.
11. The diameter of the pure water connecting pipe and the concentrated water discharge pipe should not be smaller than the diameter of the pure water outlet and concentrated water outlet.
12. For electrical installation details, please refer to the instructions of each device.
13. If the raw water is tap water and there is no raw water tank, and the pretreatment uses fiberglass tanks, it is recommended to install a one-way valve at the front end of the pretreatment. Prevent negative pressure from breaking the fiberglass can.
People are now more and more concerned about the safety of drinking water, and household water purifiers have become a necessity in modern family life. It uses reverse osmosis filtration technology and reverse osmosis membrane core components. Only water molecules can pass through the reverse osmosis membrane and be retained for people to drink. It can effectively intercept various harmful substances such as bacteria, viruses, scale, heavy metal ions, radioactive substances, etc. Various pollutants and dissolved salt ions. Smyne household water purifier ensures the safety of the water quality and there is no problem of water source pollution.