3.1 Restore Factory Settings
This setting is one of the most important settings in the barcode scanner setup, in general, the barcode scanner failure (such as not being able to read barcodes, etc.) can be resolved through this barcode scanner setup.
3.2 Prefix and Suffix Adding Settings for Barcode Data Some barcode applications require that the uploaded barcode data be read with certain prefixes and suffixes to adapt to some of the system's functions, and this barcode scanner setting makes it easy to add prefixes and suffixes to the barcode scanner.
3.3 Setting up the Bit Intercept of Barcode Data
Some barcode applications require the reading of uploaded barcode data to delete the first few characters or the last few characters to adapt to some of the system's functions, and this barcode scanner setting can be used to easily delete the number of characters for the barcode scanner.
3.4 Barcode Scanner Serial Communication Output Settings
Through this barcode scanner setting, it is easy to modify the serial parameters, such as baud rate, parity, stop bit, data bit, handshake protocol and so on.
3.5 Barcode Scanner Scanning Mode Settings
Currently the best quality barcode scanners can have a variety of scanning modes, such as manual key scanning, light constant scanning, light blinking scanning, and self-sensing barcode scanning, which can be conveniently switched between various modes through this barcode scanner setting.
3.6 Barcode Scanner Code Opening Settings
In order to speed up its decoding speed, barcode scanner often locks the barcode code system for some supported barcodes, which can not be read by the scanner under the default status. If you encounter this type of locked barcode in practice, you can open the code system quickly and conveniently through this barcode scanner setting.
3.7 Barcode Scanner Interface Type Settings
When the barcode scanner interface data line replacement, you can through the barcode scanner settings, the interface mode conversion, so that the barcode scanner can be used in the interface mode normally.
3.8 Barcode Scanner Buzzer Settings
When the barcode scanner is used alternately in a noisy environment and a quiet environment, the barcode scanner settings can be used to control the size of the scanning sound of the barcode scanner to better suit the environment for the sound requirements.
Question 2: How to set the bar code of the barcode scanner Find out your manual to see, there is a bar code set above, scan it.
Question 3: How to set up a handheld barcode scanner Barcode scanner settings here we mainly analyze through the scanner setup manual can be achieved by those scanner gun functions, the description of the barcode scanner settings through the PC software is placed in other links. 3.1 Restore Factory Settings This setting is the most important one in the barcode scanner settings, the general situation of the barcode scanner failure (such as can not read the barcode, etc.) can be through this barcode scanner settings to solve the problem. 3.2 Prefix and Suffix Addition Settings for Barcode Data Some barcode applications require that the barcode data uploaded after reading have certain prefixes and suffixes to adapt to some of the system's functions, through this barcode scanner setting, it is convenient to add prefixes and suffixes for the barcode scanner. 3.3 Bit Intercept Setting of Barcode Data Some barcode applications require the reading of uploaded barcode data to delete the first few characters or the last few characters to adapt to some of the system's functions, through the barcode scanner settings, it is convenient to delete the number of character bits for the barcode scanner. 3.4 Barcode Scanner Serial Communication Output Setting Through this barcode scanner setting, it is convenient to modify the serial parameters, such as baud rate, parity, stop bit, data bit, handshake protocol and so on. 3.5 Barcode Scanner Scanning Mode Setting Currently, the barcode scanner with superior quality can have various scanning modes, such as manual key scanning, light constant scanning, light flashing scanning, self-sensing barcode scanning, which can be conveniently switched between various modes through this barcode scanner setting. 3.6 Barcode Scanner Code System Opening Settings How to set up the barcode scanning gun Barcode scanner in order to speed up its decoding speed, often on some of the supported barcode code system for locking, the default state of the scanner can not read, if the actual encounter with this type of locking of barcodes, you can through the barcode scanner settings, the code system of quick and easy to open. 3.7 Barcode Scanner Interface Type Setting When the barcode scanner carries out the replacement of the interface data line, you can use this barcode scanner setting to convert the interface mode, so that the barcode scanner can be used normally under the interface mode. 3.8 Barcode Scanner Buzzer Settings When the barcode scanner in the noisy and quiet in the alternate use, you can through the barcode scanner settings, the barcode scanner scanning sound size control, in order to more suitable for the sound requirements. Related products recommended: Zebra barcode printer Postek barcode printer new continent data collector Bohin data collector mindeo scanner gun
Question 4: I bought a barcode scanner, how to use? Still need other software or equipment 5 points Barcode tapper needs to be connected to the computer to use, the scanner is responsible for scanning the code, the computer is responsible for recording the scanner scanned content, but also need to install the computer office software, excel tables.
Purchase a barcode scanner after the end of the scanner and the computer's u *** link, the computer will automatically install the driver, after the installation of the driver for a while will be able to use it normally, open an excel form, and then select the form of a certain area, take the scanning gun to start scanning the code. Sweep a code will be automatically recorded to the excel table, so it can be used normally.
Barcode scanner, also known as barcode reader, barcode scanner gun, barcode scanner, barcode scanner gun and barcode reader. It is a reading device used to read the information contained in the barcode, using the optical principle, to decode the content of the barcode and then transmitted to the computer or other devices through the data line or wireless.
Question 5: Honeywell scanner gun how to set up step by step to see what you need to set up, do not set up to connect to the computer can also be used, the manual has set up the barcode
Question 6: Barcode scanner set up the barcode is how to make out of the set up the barcode is a string of instructions, but in the form of a barcode to express out, with the scanner scanning time is to read the string of instructions. The scanner reads this string of instructions when it is scanned.
Question 7: Barcode scanner set continuous scanning method Barcode scanner why add before and after the set Shanghai Qibang barcode scanner engineer Ma Tianyu answer you:
Different barcode scanner set continuous scanning method is not the same, usually, the barcode scanner instructions will have a barcode or a few barcodes, according to the order of scanning can be set up.
You are talking about adding prefixes and suffixes, the main purpose is to use with the application software, such as adding the Enter key, then scanning the barcode is equivalent to the keyboard after entering a string of characters, and then press the Enter key.
Question 8: How to set the scanner gun carriage return function 1, consult the manual of the scanner gun to find the automatic carriage return setting map. Scanning once can automatically increase the carriage return function.
2, part of the model scanner gun is the English version or even the French version, which increases the difficulty of reading, you can scan the network to find the model scanner gun, download the electronic version of the scanner gun, scanning directly against the computer screen is also possible, some may not be able to try to adjust the brightness of the computer screen, and then set the barcode is larger, and then scanning can be.
3, with the return function chart, scanning once. As shown:
4, if you need to remove the carriage return function, in the manual to find the setup barcode to cancel the data format, take the scanner gun and scan this barcode, you can remove the carriage return.
Question 9: How to set the scanner gun (laser barcode scanner) sound 5 points The sound inside the scanner gun can not be adjusted to the size of the scanner gun can be replaced with a better scanner gun to get a more satisfactory sound effect, the following is a specific introduction to the scanner gun:
Scanner gun as a high-tech products of optics, machinery, electronics, software applications and other technologies are tightly coupled, is the third generation of the main computer following the keyboard and the Mouse after the third generation of the main computer input devices. Scanner since the birth of the 80s, has been the rapid development and wide range of applications, from the most direct pictures, photographs, film to all kinds of drawings and graphics and manuscripts can be used to scan the gun input to the computer, and then realize the processing of these image information, management, use, storage or output.
Question 10: Top Ranch barcode scanner setup methods what are the scanner setup methods are the same, usually the barcode scanner gun interface data line there are three kinds of data lines, respectively, the USB data line, rs232 data line and PS/2 data line, the following is the installation of the three kinds of interfaces scanner:
Barcode scanner and USB data line connection
Barcode scanner with rs232 data line connection
Barcode scanner with PS/2 data line connection