Ruthless time, the old man is like a cold wind, walking silently and hurriedly, and our work has turned a new page. It is better to make a career plan for yourself now. How to write at the beginning of career planning? Presumably this makes everyone very upset. The following is the CNC personal career planning book I compiled, hoping to help everyone.
CNC personal career planning book 1 1, introduction
The ancients once said, "If life between heaven and earth is fleeting, it will be fleeting." In these short decades, how will we plan our life and make our life more exciting? In fact, it is very simple, that is, we are required to make a good career plan from now on.
When I came to the university, I thought that the university was a place where I could spend my time freely, without the chatter of teachers and the pressure of studying. However, when I came to the university with dreams and hopes, I found that the university was not as free and relaxed as I imagined. On the contrary, in college, we need to make more efforts to become a qualified contemporary college student. In college, we should not only learn professional knowledge well, but also read extensively to understand all aspects of knowledge. At the same time, we should also exercise other abilities, such as communication ability, communication ability and organizational ability. Only by constantly improving ourselves can we survive in the increasing pressure of employment competition in the future and have a wonderful and challenging life. However, the process of self-improvement and dream pursuit is not blind, which requires us to have a good career plan.
Second, self-assessment.
Like most ordinary college students, I am also an ordinary college student. I don't have many special skills worth mentioning, I don't have looks that can attract countless eyeballs, and I don't have impressive achievements that people admire and marvel at. I am just an ordinary college student.
However, I also have my own personality characteristics. I am a person who advocates harmony and goodwill, has diverse emotions, is warm and friendly, is considerate and has strong feelings. Moreover, I can observe the people and things around me thoroughly and gain insight into the present and the future. You can always find the deep meaning and value of things, and you can see the internal relationship between things that others can't see. At the same time, I am also a dynamic, generous, compassionate, elegant and happy person. Whenever possible, I will adapt to the needs and expectations of others. Not only that, I am also a person with rich imagination and inspiration, and I am also good at innovation and finding new methods. Moreover, I also have a strong self-confidence and cautious attitude. I am good at getting along with others, making friends with all kinds of people and being considerate of others. I have very good interpersonal relationships in the group.
However, I also have many shortcomings. For example, when speaking in public, I will feel nervous and even forget what I want to say. I also lack the ability to improvise and I am not good at dealing with emergencies. And things are not calm enough, impulsive, lack of perseverance, and easy to give up halfway.
Three. Environmental assessment
In the current economic crisis sweeping the world, all industries have shrunk dramatically, layoffs, bankruptcy and bankruptcy. Therefore, the employment pressure is increasing. For our machinery industry, although the impact is smaller than other industries, it will still affect our employment. So, I want to briefly introduce the employment trend of our machinery industry:
Mechanical specialty is a department that manufactures and provides mechanical equipment and electrical devices for all walks of life, and is known as "the equipment department of national economy". In the past, almost all engineering colleges set up mechanical specialty and trained many professionals. In addition, in recent years, the economic benefits of traditional machinery enterprises are generally poor, and their ability to attract talents is limited, so the demand for employment in the machinery industry is not strong at present. However, after several years of reform and adjustment, China's machinery enterprises have gradually got rid of the shackles of planned economy and established a modern enterprise system, and the machinery industry has gradually kept up with the pace of market economy and information age; And with the development of the situation, China's manufacturing industry will have great development. Some experts predict that China is likely to become a global manufacturing and processing center in 2 1 century. In this situation, the demand for machinery will greatly increase. With the development of the industry, it will put forward the requirements of quantity and quality for employing people. Therefore, experts predict that the employment demand of mechanical professionals will increase, and there may even be a "hot sale" situation, and high-level technical talents will become the object of competition for enterprises.
In the coming 10 year, there will be a great demand for graduates in the mechanical industry, among which electromechanical integration professionals are in short supply. At present, the production equipment of many enterprises is gradually updated, and mechanical professionals who master electromechanical integration technology and know how to operate and maintain CNC equipment will be very popular. In addition, the supply-demand ratio of mechanical design, manufacturing and processing professionals is also high in recent years. Because the future working conditions of these majors are relatively difficult, they need to engage in turning, pliers, milling, planing and other work, so the number of applicants for these majors is small, and there is a big talent gap in related positions. At present, in the talent market in many places, the treatment of senior mechanical and technical workers has reached the level of highly educated people. In addition, industrial engineering and industrial design are also expected to become popular majors, because there is a relative shortage of industrial design talents in China. We have trained only about 30,000 industrial design graduates in the past 20 years, which is only equivalent to the current number of students in this major in Korea. However, the employment situation of industrial design specialty is not good at present, and the supply exceeds the demand, because the importance of industrial design is not understood and valued by people and enterprises.
From the perspective of industry development, the prospects of CNC machine tools, construction machinery, power generation equipment, printing machinery and other professions are worthy of optimism. It should be noted that the name and connotation of mechanical specialty are different in the past and today. Now, after adjustment and merger, mechanical majors include mechanical design, manufacturing and automation, material forming and control engineering, industrial design, process equipment and control engineering, mechanical engineering and automation, vehicle engineering, electromechanical integration engineering, automobile service engineering, manufacturing automation and measurement and control engineering, and MEMS engineering.
Mechanical specialty is a real specialty, from 10,000-ton ships to small mobile phones, from sophisticated to space shuttles, from ordinary to making paper clips. Moreover, the mechanical specialty also has the advantage of universality: those who study engineering machinery can adapt to medical equipment, and those who study petroleum machinery can build airplanes. In addition, it is not only the machinery industry that needs mechanical professionals. Any industry, whether it is a manufacturer or a research and development unit, needs them to install and maintain production equipment as long as they use equipment and production lines, such as pharmaceutical, dairy, food, rubber and other industries. As long as the whole social economy develops normally, there will be many jobs for graduates of this major. They can grow up to be engineers and be competent for management positions.
Therefore, mechanical specialty is a relatively easy-to-obtain specialty.
Fourth, the target occupation demand analysis
Basic requirements: As a qualified mechanical engineer, he should actively adapt to the development trend of globalization, informationization, greening and service of manufacturing industry in the world today, strive to improve his comprehensive quality, and become a new generation of mechanical engineering professional and technical personnel with good professional ethics and innovative ideas, master mechanical manufacturing technology, and understand economy, management knowledge and related international principles.
The examination contents listed in the syllabus reflect the basic knowledge, relevant knowledge and skills that a qualified mechanical engineer should have in all aspects. We should not only learn the main basic and professional knowledge in the university, but also expand new knowledge after graduation. So I must have a solid university foundation, practical work practice after graduation, and continuous accumulation of continuing education while working!
Summary:
Through the analysis of the employment situation and target occupation (mechanical engineer), I clearly realize that senior mechanical engineer is a profession full of challenges and opportunities, and the working environment and content of mechanical engineer are also in line with my own interests; From the overall situation and future trends, I choose the industry as my goal, and I have a long way to go. In the next eight years, this will be my goal!
Verb (abbreviation for verb) goal and plan
Short-term goal: (college life stage)
Second year of college
1, get the level 4 certificate.
2, through the national secondary computer application basic examination.
3, increase the study of professional knowledge, complete the required courses, get a scholarship!
4, read a lot of books, dabble in all aspects of books, understand all aspects of professional knowledge, and consolidate the foundation of engineers!
5. Communicate with people more, establish a good interpersonal network, strengthen eloquence, express fluently and clearly, and increase your competitiveness.
6. Skillfully learn drawing software, such as CAD and 3DMAS.
Third year of college
1, and strive to obtain the CET-6 certificate.
2. Pass the national second-level C++ exam.
3. Read more relevant professional knowledge in the library and do in-depth research.
4. Keep your academic performance and get the first-class scholarship.
5, during the summer vacation to the construction site or company internship, accumulate experience.
6. Continue to strengthen eloquence and communicate with others.
7. Consider going to graduate school.
Senior year of college
1, consolidate professional knowledge, so that all courses can be integrated and form a thinking framework.
2, keep good grades, be among the best, and get a national scholarship.
3. Borrow an application for a job from the library to let yourself know the interview skills.
4. Participate in job fairs, experience the scene and accumulate job-hunting experience.
5. Read more books to enrich your cultural background, such as reading books or masterpieces in humanities and social sciences.
6. Learn English deeply and add more confidence to job hunting.
7. Communicate with the brothers and sisters who are about to graduate, learn from the experience of job hunting, carefully complete the graduation design and thesis, and strive for good results.
8. Work hard to deepen theoretical study, improve yourself and improve your own ability.
9. Understand the relevant information of the employer from all aspects.
10, read more books about the construction industry and do in-depth research.
1 1, understand the society, understand the national conditions, increase talents, and pave the way for future work.
12, mechanical engineer is a job with great responsibility, and it is very strict to implement, and there can be no carelessness. Therefore, it is necessary to form rigorous structured thinking and cultivate the spirit of meticulous handling.
And then admitted to graduate school.
Substitute:
1. First, work in a formula as an ordinary employee.
2. While accumulating work experience, I understand the regulations!
Improve your social experience and continue to study English hard at the same time.
4. Try to be a qualified technician, learn more from senior engineers, know more about the inside story of banks, engage in some simple design work and do a good job.
5. Continue to learn books related to mechanical engineering industry and enrich yourself.
6. To prepare for the qualification of registered mechanical engineer, on the one hand, we should continue to learn theoretical knowledge, on the other hand, we should improve our own ability.
Three or five years after graduation
1, and strive to be promoted to engineer assistant by obtaining relevant certificates.
2, familiar with the industrial situation, in-depth study of all aspects of construction project design knowledge, have the opportunity to participate in actual combat.
3. Continue to learn foreign languages well and have simple communication with foreign language people in daily life.
4, read more mechanical engineering books, combined with mechanical engineering theory, analysis and study of various large-scale projects, learning project knowledge.
5. Establish a correct outlook on life and world, and cultivate the moral quality of mechanical engineering.
Long-term goal: (stable working stage)
Five years after graduation
1, become an engineer assistant.
2, work and rest, books enrich knowledge.
3. Try to be an engineer.
Abstract of intransitive verbs
I am the master of my youth. I chose my youth to fight for a mechanical engineer. This choice was made through various surveys and comparisons. This is a suitable choice for me! I also have a set of implementation plans suitable for me, which are customized according to my actual situation. I roughly analyzed the social circle of my family and the social industry of the place where I want to live, and combined with what I like to do, so I can do it in one sentence-my plan!
Personal Career Planning of Netcom Volume II: Analysis of Current Situation
Recent development
①20xx.9-20xx.4 internship is also my first job;
②20xx.6 After graduation, college life is over, and so is student life.
③20xx.6-20xx.8 went home for a photo test, and the result was very bad, and the driver's license was not successfully obtained;
④20xx.8-20xx.9 failed to find a job;
⑤20xx.9 So far, I have resigned from a job that I have only been doing for two weeks, trying to find a house and a job.
Second, the current contradiction.
(1) The contradiction between not being able to find a suitable and satisfactory job and desiring to get a suitable and satisfactory job; (principal contradiction)
(2) the contradiction between the consumption of daily living expenses and the shortage of living expenses; (minor contradiction)
③ The contradiction between unemployment and interpersonal relationship. (minor contradiction)
Third, the contradiction analysis
Judging from the current situation, I am in a state of unemployment and looking for a job, not the state of looking for a job at first. The job search will go on until the third month. Psychologically speaking, getting a job is my most urgent need. However, there is a trade-off between eager to find a good job and eager to find a good job. If you are eager for success, it is difficult to find a suitable and satisfactory job. If you don't rush for success and continue to delay time, not only can you not find a job, but over time, there will be a major crisis in living expenses and interpersonal relationships.
For a person, whether he has a job or not is obvious to his living standard. One state is to make money every day and get satisfaction after work. One state is spending money every day, doing nothing all day, and self-confidence is gradually being worn away. The cost paid in the process of job hunting is huge, and shortening the time limit for job hunting is meaningful to both people and themselves.
People's society determines that people are not only for their own survival. Similarly, if a person can't find a job, his negative emotions will also hurt others, which will cause other contradictions in any case. Therefore, shortening the time of unemployment can fundamentally alleviate the tense interpersonal relationship.
Fourth, the solution
From the analysis of the current situation, it is very difficult to fundamentally solve the main contradiction. At present, only easing the contradiction is the key to solving the problem. The main way to alleviate the contradiction is to relax the conditions appropriately and find a suitable job temporarily. As for whether you are satisfied or not, when the unemployment problem is solved, you can find a satisfactory job later. In this way, the principal contradiction is downgraded to the secondary contradiction, and the other two secondary contradictions are solved. Why not?
When work and life are stable, we will solve the main contradiction of "finding a satisfactory job" as appropriate, so that all the current contradictions can be resolved.
Five, career choice analysis
The first volume words
Remember when I was a child, people around me asked me what I wanted to be when I grew up? At that time, I was very young. I just think the driver driving on the street is great, so I don't hesitate to tell him that I will drive when I grow up. Now more than ten years are gone forever. It is difficult for me to answer such a question now, or even impossible to answer it at all. Yes, after so many years, not only my own ideas are changing with each passing day, but also the environment around me is undergoing profound changes. When one day, my ideal becomes a reality, but I care too much about myself to locate it accurately.
Even so, people are people after all. If a person has no goal and no accurate positioning, he may only spend his life in drowsiness, enter this world, but quietly leave. Is it necessary to continue this life?
Second, professional analysis
① Major: Numerical Control Technology
② Employment direction: operation, maintenance, debugging and installation of CNC equipment.
3 professional considerations: I was confused when I chose this major, but there is a standard, that is, I hope I can have a skill, eat by technology, and eat everywhere I go. Life is divided into books, down-to-earth, not seeking great wealth, but seeking happiness and well-being!
④ Professional evaluation: From a realistic point of view, the employment prospect of the CNC technology major at the junior college level is not very good, which can be felt from the internship experience and the feedback from the job fair. It is not difficult to see from the employment direction of this major that after graduation, it is mainly concentrated in jobs such as CNC operators, equipment maintenance and adjustment workers, and the employment scope is very narrow.
Three ideal occupations
Quiet, can see the fruits of labor, appreciate the work, don't have to work shifts, take a day off every week to control time, be free, without too many restrictions, pay to meet the needs of normal life, and have a certain sense of identity with corporate culture.
Fourth, the employment situation
① CNC major: CNC operator, inspection, assembly, CNC technician, equipment safety, mechanical engineer, electrical engineer, draftsman, office clerk, safety officer, equipment installation and debugging, programmer, etc.
② Easy work: sales (insurance, real estate, telephone sales, etc. )
③ Interest: software (graphic design, editing, etc. )
4 Entrepreneurial fields: drivers, franchise stores, online stores, etc.
Five corporate culture requirements
Freedom and equality, good treatment and welfare, consistent cultural identity, certain development space and humanization.
Six life and employment routes
Three routes of life: paid, paid &; To start a business, work first and then create.
1 wage type: wage type defines its social role as an office worker. Choosing wage earners means that you have to work for others all your life. Choosing this route has both advantages and disadvantages. The advantage is that life is stable, there won't be too many ups and downs, and life will not be too rich or too poor. But as the working class, they have a certain social status. The disadvantage is that day after day, year after year, it is easy to kill the will, the salary is fixed, it is easy to meet, and life is not too many surprises.
② Wage entrepreneurship: This type is part-time entrepreneurship based on wage entrepreneurship. In addition to the characteristics of wage type, there will be a second occupation. This type will not only have a stable income, but also "extra money", so the source of life will not be limited, but after all, because of having two jobs, life will be more tired.
(3) Work first and then create mode: As the name implies, this type is to work first and then start a business. Before starting a business, work first, and after accumulating certain work experience and wealth in the society, find another way and concentrate on starting a business. This type of route will be more risky, and it is likely that hard-earned money will be wiped out overnight, but once it is successful, the benefits will be huge, and there will be no need to work for others. Although hard day and night, but free, people will live more chic.
7. Career orientation
Choosing any of the three employment routes in life is a difficult choice. Among the three routes, the risk coefficient will increase in turn, but the rate of return and living standard will also increase in turn. But no matter which one you choose, there will be a process of going to work first when you decide on the final role-playing. Because the final role-playing of the three routes is different, the emphasis is also different, so we should also choose carefully when deciding to make the first one. Before it was really established, it was no problem for me to engage in work-related and interesting entrepreneurial projects.
Three personality characteristics of NC personal career planning book;
Results of self-assessment:
I am a technical secondary school student. I usually live frugally, have a lively personality and strong practical ability. I am serious, meticulous and devoted to my work, but sometimes I lack initiative, and I am easily influenced by external factors and my normal work. I attach importance to the relationship between people, be friendly to people, easily see the needs of others, and be friendly to people. I am easy-going, rigorous and meticulous, caring, responsible, enterprising, curious, enthusiastic, hardworking and fond of working in groups. Don't like to conflict with others, don't praise others. However, I am indecisive and often can't make up my mind. In addition, I lack the ability to speak on stage and some eloquence.
In junior high school, I was a very introverted person. I don't like crowded places, and I basically don't participate in any activities outside of study, but I am very talkative, so my interpersonal relationship has always been good. After high school, especially in college, under the influence of the external environment and people around me, I began to be outgoing and made many good friends. Moreover, it has a good mass base. The current vice squad leader has certain organizational and leadership skills and participated in planning a number of activities, which really changed his previous withdrawn personality. Career evaluation results:
Analysis: Your personality type is "ISFJ" (introversion+true feelings+emotions+judgment).
Calm, friendly, responsible and cautious. Can unswervingly take responsibility. Perseverance, indefatigability and accuracy in doing things. Loyal, considerate and careful; He always remembers the little things of people he values and cares about the feelings of others. Strive to create an orderly and harmonious working and family environment.
Type A people are very pragmatic, loyal, dedicated, compassionate and understand the feelings of others. They are clear-headed, responsible and willing to be needed by others. I like to use a lot of facts and have a strong memory for details. Have a strong professional ethics. Helpful, like to help others in a down-to-earth manner. They communicate with people with personal enthusiasm and get along well with people in difficulties. I don't like to express my personal feelings, but I actually have strong personal reactions to most situations and events.
Level analysis: suitable occupations are: mechanical and electrical engineer, commodity planner and middle manager.
Self-summary:
In reality, I am not mature enough, lacking social and life experience, and my self-control ability is weak. I know it will have a negative impact on my future work, but I believe that when shortcomings and deficiencies become obstacles on my way forward, I should make full use of my advantages to get them out of the tight encirclement. Know yourself clearly before taking measures to remedy it. Dare to try, seize every opportunity and dare to speak your mind. As long as I consciously correct and improve myself in the remaining college time, these are not problems.
occupational interest
Results of self-assessment:
I have strong independent thinking ability and spatial imagination ability, and I like to explore new things, enjoy and depict nature in my own way. Moreover, I hate those fixed working patterns and don't like to do some fixed operation work. I prefer to do some work with more social value. In addition, I have always been interested in software design, and I feel that I have certain potential in software, and there may be more room for development in the future. Career evaluation results:
My Dutch code is SEC (social 52.3%+ enterprise 45.5%+ traditional 36.4%).
Self-summary:
Because of evaluation and professional evaluation, my professional interest focuses on the pleasure that work can bring in cooperation with others. Tend to work in a stable team. And it is best to get your own value from it. I am eager to engage in painting, software development and design.
Professional competence
Self-assessment results:
My major is numerical control, which is a characteristic major of the college. The major is very good, especially as I am a student from three schools, and I have a good professional foundation, so I have certain advantages in this major. For example, I learned some basic theoretical courses such as mechanical drawing very well, and won many professional awards in high school. As for professional software, I am also in the forefront of my classmates, and this piece is often praised and affirmed by everyone.
In my spare time, I also actively participated in the student organization work of the branch, and now I am also the director of the student union office of the branch and one of the main class cadres of the class. I have many opportunities to exercise my comprehensive ability, and my management and organizational skills have also been affirmed by my classmates and teachers during my college years. On weekdays, I also actively participate in some weekend volunteer activities and summer social practice activities of the branch, and I also have a certain foundation in social services.
I have been internship in some factories, large and small, every winter and summer vacation since I was a freshman in high school. Contact with a lot of social professional knowledge, but also constantly exercise their social acceptance and adaptability to the social environment, so they also have great advantages in social experience.
Talkative, good-tempered, and good at listening are my greatest characteristics, which is another advantage of me.
Career evaluation results:
Summary of professional ability:
My five outstanding skills
Pay sensitive, meticulous and active attention to the work and life of others and understand why they do this.
Time management arranges time reasonably and never wastes a minute.
Try to learn from each other's strengths with an open mind, listen to others' opinions with an open mind and change yourself.
Mediation and consultation can coordinate contradictions, resolve differences and unify thoughts and opinions.
Pioneering and innovating can accept new things earlier and constantly innovate and reform.
My professional ability is not very strong, I am not good at communication, I am not very mature in dealing with people, I am not good at communication, and my organizational and management skills are poor, but I will work hard.
Professional values
Results of self-assessment:
As a college student, first of all, I want to be clear about my ideological position. Besides having the lofty idea of advanced party member, I also need to be helpful in my life, be diligent in my studies and be optimistic in all aspects.
Third, family is the most important thing. Career is to create a happy family, and then value interpersonal relationships and their own abilities. I can work in a friendly environment, fully cooperate and coordinate with others, give full play to my professional level, feel everyone's appreciation and support, and treat my colleagues as friends.
Professional value orientation test results:
A summary of the exploration of professional values;
First of all, after finding a job, you should get on well with your colleagues and leaders. After that, we should pursue the fruits of our own labor, do our own job well and help others appropriately. I also need the support of others in my work!
Personal affairs, career and family life should develop harmoniously. As long as you try your best, your ability has also been brought into play, and you have really improved yourself at every stage. Even if your goal is not achieved (especially the income goal), don't feel failed. Putting too much pressure on yourself is a failure in itself. I think it is understandable to sacrifice my career goals for my family.
;