Product name: dispensing equipment (2 pressure drums + AB double liquid dispensing valve + dual-port dispenser)
AB double liquid dispensing equipment from the two pressure drums and double cylinders can be adjusted back to the suction type AB double liquid dispensing valve JL-H3242AB2 and a dual-port dispenser supporting the formation of the AB group of glues, the range of ratios below the 3:1 adjustable, can be matched with a variety of mixing tubes, the degree of mixing, the mixing of different lengths and sizes of static mixing tubes, more effective to ensure uniform mixing of glue, so that more accurate dispensing accuracy. Choose different lengths of static mixing tube, more effective to ensure that the glue is evenly mixed, so that the dispensing accuracy is more accurate, the scope of application: cell phone press Jian dispensing, electronic products, optical device dispensing, coils and speakers outside the circle of the dispensing, cell phones and notebook batteries packaging, PCB, PDA, LCD sealing and so on.
Product Name: Dispensing Valve
The thimble type single-liquid dispensing valve models: JL-D2121, JL-D18, JL-D1616, JL-D19, JL-D30, JL-D2222, suction type single-liquid dispensing valve models: JL-H1616, JL-H3030, JL-H3131. JL-H25, JL-H30, JL-H2222, plunger type dispensing valve model: JL-Z30, diaphragm type dispensing valve: JL-G25, high-pressure resistant quantitative grease dispensing valve model: JL-D3075, AB two-liquid dispensing valve model: JL-H3242AB1, JL-H3242AB2, JL-D6343AB1, JL- H1919AB, JL-D1919AB, hand-controlled dispensing valve models: JL-SD20, JL-SD18, JL-D1919, can be connected to a variety of needle nozzles, can be connected to any pressure drum to use, can be assembled with automatic dispensing machine with a number of dispensing valves at the same time dispensing operations, a wide range of production to improve yield, save production time, reduce consumption. Dispensing valve for a variety of different fluidity and viscosity of liquids and oils (including: silicone, red glue, yellow glue, white latex, crystal glue, anaerobic adhesive, silicone, insulating adhesive, solder paste, AB adhesive, UV adhesive, epoxy resins, lubricants, silicone oil, butter, lacquer, alcohol, oil, etc.).
Product Name: Pressure Drum
Pressure drums of various models, carbon steel pressure drum specifications: 2L, 5L, 20L, stainless steel specifications: 500ML, 2L, 2.5L, 3L, 5L, 10L. Carbon steel pressure drum with stainless steel inner liner, the storage of pressure drum barrel body using seamless stainless steel tubes molded in one piece, is not easy to react with the chemical substances, a long service life, wear-resistant, corrosion-resistant, sturdy Strong corrosion resistance, strong and durable, the barrel lid and barrel material, stainless steel pressure barrel surface polishing and hardening treatment, high strength, good sealing, non-stick glue, strong security, the use of the original packaging of glue into the pressure barrel, then there is no need to clean, easy maintenance, can also be directly poured into the glue pressure barrel operation.
Product Name: Silicone Sleeve
Silicone Sleeve for mass production dispensing, existing specifications: 330ML, 300ML, 170ML, 147ML, suitable for a variety of tubular adhesive packaging (such as red, Silicone, Epoxy...etc.) can be used, the body of the tube using aluminum alloy anodized black treatment, light weight and durable, easy to operate. It is light weight and durable, and can be operated with less effort to increase the production capacity, and can be used with dispenser for quantitative dispensing.
Product name: 50ml flashlight AB glue dispenser
Mass production flashlight AB glue dispenser specifications: 1:1 (50ml), 1:2 (37m, 50ml), 1:4 (50ml), 1:10 (50ml), suitable for a variety of two-component adhesive, such as: red glue, epoxy glue, silicone and other two-component glue.
A good set of products, is a good consignment, so that you use the peace of mind and heart, the dispensing industry focuses on product quality and service to customers, in the dispensing products continue to push the boundaries, research and development of a type of, production of a type of, service a type of, to help the dispensing industry's products to appreciate the value of the product, to do to increase production and reduce consumption.