Question 2: How to do a good job of personal protection 1, eye and face protection (1) Full protective glasses (eyes and face are the most vulnerable parts in the laboratory, so it is particularly important to protect them. In the laboratory, neon experimenters must wear safety glasses. (2) When chemicals splash into eyes, they should be washed thoroughly with water immediately. When washing, you should open your eyelids, wash it carefully with tap water for a few minutes, then wash it with distilled water, and then go to the infirmary for treatment. (3) Face protection equipment is used to protect the face and throat. In order to prevent possible explosion and harmful gas produced in the experiment from causing injury, you can wear plexiglass protective mask or respiratory protection equipment. 2, hand protection (1) In order to prevent hand injuries in the laboratory, you can choose to wear various gloves as needed. Wear gloves when touching corrosive substances, sharp-edged objects (such as broken glass, wood and metal fragments) and substances that are too hot or too cold. (2) Gloves must be used carefully to ensure that gloves are not damaged. Protective gloves mainly include the following types: (1) Polyethylene disposable gloves: used to treat corrosive solid drugs and dilute acids (such as dilute nitric acid). However, this kind of gloves cannot be used to treat organic solvents, because many solvents can penetrate polyethylene, resulting in holes in the joints. Medical latex gloves: These gloves are made of latex and can be reused after treatment. As these gloves are short, you should pay attention to protecting your arms. Gloves are not suitable for handling hydrocarbon solvents (such as hexane and toluene) and chlorine-containing solvents (such as chloroform) because these solvents will cause gloves to swell and damage. (c) Rubber gloves: Rubber gloves are thicker than medical latex gloves. Canvas gloves suitable for long-term exposure to chemicals (E): generally used for high-temperature objects. (f) Yarn gloves: generally used for the operation of contact machinery. 3. Physical protection (1) workers are not allowed to wear sandals and slippers, and chemical workers are not allowed to wear high heels into the laboratory. Wear flat bottom, non-slip, synthetic leather or leather shoes. (2) All personnel must wear work clothes when entering the laboratory to prevent the skin and clothes of the body from being polluted by chemical substances. (3) Work clothes are generally not resistant to chemical corrosion, so when the corrosion is serious, these work clothes must be replaced and updated. (4) In order to prevent the chemical substances attached to work clothes from spreading, it is not allowed to wear work clothes in other public places such as canteens and conference rooms. (5) Clean the work clothes once a week.
Question 3: Briefly describe how to do a good job in personal safety protection and how to be the master of life in the future. Personal safety protection at work basically includes "prevention", "thinking" and "action".
(1) "prevention first".
Facts have proved that many accidents can be avoided. The accident happened because some managers and operators lacked safety awareness and advanced awareness, and neglected the usual safety work, so they failed to find and eliminate hidden dangers in time until the hidden dangers expanded and worsened, and even caused serious consequences. To prevent accidents before they happen, we must have the ability to predict and prevent accidents in advance. It is also necessary to strengthen safety supervision and management, implement various preventive measures before the accident, and eliminate hidden dangers in the bud. Only in this way can we firmly grasp the initiative of safety work and minimize the accident rate.
(2) "think about it first."
Every day before going to work, we should insist on one-minute pre-job education, think about how to prevent safety accidents at work, and think about what methods and measures to take to ensure safety in production. As a safety production manager, we should constantly explore and study, establish and improve an effective set of rules and regulations and safety responsibility system, constantly strengthen and improve the quality of all staff, discover and eliminate all kinds of unsafe factors, minimize people's unsafe behaviors, and constantly intensify the rectification of the production site and working environment, so that employees can have a good environment and a reliable sense of security in the production process. To achieve this, every worker, every manager and every leader must always "think ahead" and have a strong sense of being ahead. Only in this way can the safety work be meticulous and effective, and the safety production can be guaranteed.
(3) "Do it first".
In the production process, managers should identify and judge various factors that may lead to injury accidents, especially major accidents, and take decisive measures in time to eliminate and prevent accidents.
There are many dangers in our work. Always remember that safety is "safety first, prevention first". Whenever we come into contact with harmful substances, we should first take personal protective measures and wear personal protective equipment deh *** at work.
Question 4: To talk about how to do a good job in self-safety, we must first know what risk factors are in our post, and then master the correct operation process, including what personal protective equipment to wear, the inspection method of wearing protective equipment, and what protective measures are available for equipment or posts. You also need to know what emergency measures should be taken in case of abnormality or danger. If you accidentally come into contact with chemicals, how to clean or remove them.
Finally, when working every day, we should seriously abide by the safety operation procedures.
It is best to know relevant laws and regulations, such as labor contract law, occupational disease prevention law, industrial injury insurance regulations, etc. There are contents about how to protect their legitimate rights and interests when they encounter work-related injuries or occupational diseases.
The telephone number for handling labor disputes and industrial injury complaints is 12333 local social security bureau.
Question 5: How to protect personal information? Don't use your mobile phone with information to do messy things. Don't easily fill in your own information on the web page.
Question 6: How to do your own safety protection? Do you mean power safety or personal safety? If electricity is used, the safe voltage is 12V 24V 36V, and the step voltage range is 5M, which is complicated for personal safety. . . Learn Sanda?
Question 7: How do carpenters do their own safety protection work? Be familiar with the correct use of all tools, and carry out every work according to the safe operation methods or requirements. It is forbidden to work after drinking and fatigue.
Question 8: How to do your own safety protection after joining the company? After joining the job, you should know what hidden dangers are in your work, where they are, do your own safety protection seriously, wear tooling, operate in strict accordance with the requirements, and have common sense to prevent safety problems outside your job responsibilities, and so on.
Question 9: How to do a good job in personal information security, develop good online habits, and surf the Internet green? Don't visit websites you don't know or understand, and don't download content. It is very likely that there is a Trojan virus built in it to steal your personal information and get enough information about your anti-virus software, but it is inevitable to slip through the net. So it's best to go to your familiar, recognized and officially certified website.
Beware of phishing software. You need to be careful when downloading software on the website. Some software looks like decent software, which is similar to the page of the software you are familiar with in all aspects, but it actually captures the user's personal information. For example, if you need to enter your personal information, including phone number, ID number and even bank card number and credit card number, you should be careful.
Don't disclose your personal information at will. Some people go online and give away their personal information if they are not careful. For example, a webpage pops up saying that you have won the prize, you need to fill in the bank card number to receive the prize, and you need to pay the postage to receive it. Some people fill it out without thinking, and reveal their personal information before being cheated. Therefore, when surfing the Internet, you must first find out whether the information you need to fill in involves your own information security, so you need to be cautious.
Question 10: How to do a good job in safety inspection is one of the important measures to do a good job in safety production. Through safety inspection, hidden dangers in production can be found in time, and nip in the bud. The inspection contents include inspection ideas, understanding, systems, measures, hidden dangers of accidents, labor discipline, funds for safety measures, use and distribution of labor protection articles, "three violations (illegal command, illegal operation and violation of labor discipline)" and rectification of remaining problems, among which the inspection methods are divided into five categories: daily inspection, regular inspection, special inspection, seasonal inspection and surprise inspection. The methods of safety inspection include self-inspection, mutual inspection, spot check and auxiliary inspection. Safety inspection is an effective measure to raise awareness, understand the situation, find problems and investigate hidden dangers. Through inspection, we can communicate with each other, enhance our preventive ability, exchange experiences, promote safety work and promote safety production. Over the years, the state has always attached great importance to the work of safety in production, and has successively promulgated the Law of the People's Republic of China on Road Traffic Safety and its implementing regulations, the Implementing Regulations of People's Republic of China (PRC) Mine Safety Law, and the Law of People's Republic of China (PRC) on Safety in Production. The form, content and function of safety inspection are strictly emphasized and required, and the inspectors themselves have done a lot of work on the methods and effects of inspection. However, the effect of safety inspection is not obvious, just checking, not changing, not implementing, just taking the form, losing the real significance of safety inspection, and even leaving hidden dangers for safety work, which can not play the role of supervision, guidance and warning. So, how to strengthen the safety inspection and improve the inspection effect? Combined with the practice of safety management, the author talks about personal views and experiences on safety inspection. First, it is necessary to clarify the purpose of safety inspection. Safety inspection is an effective safety management means to discover hidden dangers in time, eliminate unsafe factors, exchange safety production experience and promote safety work. Security check is a means. How to do a good job in inspection should be well thought out and planned. According to the situation, what should be included in the scope of key inspection, which should be focused on inspection, and which should not be blindly inspected, so as to return without success, we must first know fairly well. This is the ideological understanding problem that the inspector should solve first. In safety inspection, it often happens that the inspector and the inspected only know the general content of the inspection, but are not very clear about the purpose and significance of the inspection; The result is: after a long time, the number of inspections is more, the examiner is used to it, and the examinee is relaxed, paralyzed and tired. Therefore, before each inspection, the purpose and significance of the inspection should be explained to the inspectors and the inspected by means of short meetings and on-site meetings in combination with the actual situation, so that each participant can understand. Second, improve the inspection methods In recent years, some units have taken the number of violations corrected as an important basis for assessing the performance of safety management personnel, which has played a certain role in strengthening safety management and ensuring on-site safety production. However, some managers are not clear about the guiding ideology of safety inspection. In order to achieve the target, during the safety inspection, their attitude is blunt, and the scale of correcting violations is not well grasped, which leads to the opposition of the inspected employees. Therefore, it is necessary to strengthen the professional ethics education for safety management personnel, make them correct the guiding ideology of safety inspection, change from "punishment instead of education" to education improvement, and achieve civilized law enforcement. In safety inspection, we should not unilaterally pursue the number of violations, but pay attention to working methods to convince people. For violations of rules and regulations, we should not only resolutely correct them, but also explain to employees the reasons why they can't do so, so that they can understand the harm of illegal operations and consciously abide by rules and regulations and discipline. Third, it is necessary to clarify the contents of the inspection and check whether the safety awareness and safety production quality of employees meet the requirements; Whether the safety production rules and regulations are sound; Whether to put the safety and health of employees in the first place; Check whether leaders at all levels put safety work on the important agenda; Whether the idea of "safety first, prevention first" has been established; Whether to adhere to the principle that production must be safe, whether the safety organization is sound, and whether the safety management of all employees plays a role; Check whether employees have a strong sense of safety responsibility, master safety operation skills and consciously abide by safety technical operation rules and various safety production systems, dare to correct and stop unsafe behaviors, strictly abide by labor discipline, achieve safe and civilized production, and correctly and reasonably wear and use personal protective equipment and appliances. Editor's reminder: Please pay attention to check whether the article ""has pagination content.