1. Layout of safety production interval:
High toxic and harmful operations and low toxic and harmless operations are arranged separately; The plating solution containing cyanide should keep a safe distance from acidic substances or be effectively isolated; Dramatic drug warehouse should be far away from heat sources, power sources, fire sources and residential areas, and should be close to the place of use; Flammable and explosive production parts such as paint should be set near the external wall of single-storey factory buildings or the top floor of multi-storey factory buildings, and the distance from the surrounding areas should meet the requirements of specifications.
2, anti-virus measures:
Places where drama drugs are stored and used should be equipped with anti-theft alarm facilities, and irrelevant personnel are prohibited from entering; The packaging bags of drama drugs are not allowed to be discarded casually, but should be disinfected and recycled; Reform the process and try to use low-toxic and harmless processes and substances; Electroplating production should be mechanized and automated, and the toxic substance production device should be sealed to reduce the contact between personnel and toxic substances; Improve ventilation conditions. Workers in positions such as painting, electrophoresis and ink coating can wear air respirator and use positive pressure air supply. Acid fog, paint fog, toxic gas and dust should be absorbed or discharged at high altitude. Strictly control the working temperature and current density. First-aid medicine containing cyanide.
3, occupational hazard protection facilities and protective equipment.
Wear dust mask, gas mask, gas mask, rubber gloves, goggles, water shoes, respirator, protective clothing and other corresponding personal protective equipment when contacting toxic and harmful substances, corrosive substances, high-temperature substances and dust.
Heatstroke prevention and cooling measures should be taken in high temperature season. In addition to strengthening ventilation, you can also take the roof spray to cool down, provide cool drinks and medicines for heatstroke prevention, and pay attention to the education of heatstroke prevention knowledge and temporary first aid methods.
The posts such as grinding, wire drawing and sand blasting should be ventilated by force and equipped with safety protection equipment such as air respirator.
To prevent occupational hazards in electroplating industry, in addition to the above safety measures, enterprises should also improve the occupational health training system, strictly implement the provisions of occupational hazard warning signs in workplaces, and set up occupational hazard warning signs and signs in workplaces in a conspicuous and standardized manner. Enterprises should constantly improve protection facilities for occupational hazards in production, increase investment in protection facilities, equipment, equipment and supplies, improve pertinence and effectiveness, and improve protection effect.