With the popularity of wearable devices, more and more people wear smart bracelets. I will take the music bracelet mambo2 as an example to tell you how to charge the smart bracelet.
Tools/materials
Happy mambo bracelet
Mobile phone connected to bracelet
Lexin sports APP
The first step is to check the power of the bracelet and open the "Lexin Sports APP" with your mobile phone.
Click to enter my interface. There are connecting devices below, and you can see the power of our bracelet.
Take out our bracelet and find the place with USB logo on the back of the bracelet strap.
Press a small square on the back of the bracelet and remove one side of the bracelet to expose the USB interface.
Plug the USB interface directly into the USB interface of the computer or charger to start charging.
After charging, an animated display of charging will appear on the front of the bracelet.
Special tips
The charging time is about one hour.
Fully charged can turn on all functions battery life: about five days.
How to charge the sports smart bracelet?
If you want to charge the OPPO smart bracelet, you can refer to the following scheme:
1. Align the charging interface on the bracelet body with the charging base, that is, the contact, and fasten it into the charging base; After the buckle is in place, plug in the power supply, the charging indicator light appears, and the bracelet begins to charge.
2. When using the fashionable wristband, you don't need to disassemble it before charging. When using the sports wristband, the main body should be removed from the wristband before charging.
3. If the bracelet cannot be charged, please take the bracelet, charging base, packing box and warranty card to the nearby customer service center in time.
Take Huawei bracelet 4 as an example:
First, charge
1. Press and hold the quick release button (long wrist strap end) to separate the wrist strap, and then insert the USB charging port into a charger with USB interface or a computer USB interface for charging.
2. Insert the charging metal sheet of the bracelet against the charger metal sheet in the middle of the USB interface, and the bracelet will vibrate to remind you when it is turned on.
3. When charging, a charging icon and power prompt will appear on the screen, and the main body will start automatically, otherwise, please change the direction of the charger and try again.
Warm reminder:
The bracelet will vibrate twice when it is turned on for the first time, and the screen will light up when it vibrates for the second time. The whole process takes more than 12 seconds. Please be patient.
Please keep the charging interface dry and clean before charging to prevent short circuit or other risks.
If the bracelet screen is stuck or black, open the bracelet and restart.
The bracelet is not equipped with a charger. Please use Huawei charger with rated output voltage of 5V and rated output current of 1A or above, computer USB interface, or a charger that meets applicable national regulations and international and regional safety standards to charge the bracelet.
Other chargers and mobile power sources (charging treasures) may not meet the applicable safety standards, resulting in problems such as slow charging and fever. Please use them carefully. It is recommended to purchase Huawei chargers from Huawei's official channels.
Second, the charging time
The bracelet is fully charged for about 90 minutes (ambient temperature is 25℃), and the battery icon shows full charge after it is fully charged.
Warm reminder: In order to ensure the safety of the battery, when the ambient temperature is too low, the charging current of the battery will be much smaller than that at room temperature, resulting in a longer charging time. It is recommended that you charge the bracelet at a temperature of > 20℃.
Third, check the power supply.
When the bracelet is open, click on the dial to check the power.
Click More Batteries to check the power.
Check the power of the bracelet in the sports health App bracelet details interface.
Warm reminder: the power is continuously displayed in 1%.
How to charge the smart bracelet is actually very simple
1. Judge whether the power is sufficient, open the "Lexin Sports app", enter the "My" interface, and see the small print at the bottom of the device.
2. Find the end of usb on the back, press "Click", unplug it to see the usb interface of the bracelet, and plug it into the computer or usb power supply directly.
3. A charging animation will be displayed on the front of the bracelet, which can be charged to 100% in ten minutes.
How to charge the sports bracelet?
Hello, 1. A general sports bracelet charges the main body through a charger and charging contacts.
2. If you haven't charged for a long time, it is suggested that you can wipe the charging contact of the bracelet with your hand or cloth, or scrape it with a knife. Then press the bracelet and charger tightly, let them fully contact and charge for 30 minutes to see if they can be charged normally.
How to charge the sports bracelet is not displayed and cannot be charged;
The wrong charging method, damaged data cable, hardware problems and other links may cause the bracelet to be unable to charge.
If you encounter the problem that you can't charge, you should first replace a power supply and data cable, and check whether the charging base is closely connected. If you can't charge, you must rule out the problem of this link.
Secondly, you should check the charging port of the bracelet. It may be that traces of sweat and other dust have affected the contact. You can wipe it with a cotton swab before trying to charge it.
If the above methods still can't solve the problem, it means that there is a hardware failure, and you need to take the bracelet, warranty card and invoice to the maintenance point for processing. Don't disassemble it by yourself, it will affect the warranty.
Note: Proper daily wear of smart bracelets can prolong the service life and reduce unnecessary injuries. Although many of them are waterproof, they should be waterproof and cleaned regularly to avoid physical pulling injury.