2. Download the "Evey Health Assistant" APP in your mobile phone, search in the application market or download it at the following website.
I own/CMS/list/4
3. Open the software after downloading and log in directly with QQ or WeChat. Enter the app, and the homepage interface of the app will be displayed, and the top will be disconnected.
, click here to disconnect,
Enter the equipment list search interface,
Click on the search bracelet, and the Android phone clicks on any one. After searching for the bracelet, select the Bluetooth pairing code of the bracelet with the corresponding ID in the list (the pairing code is the 4-digit number displayed in the first interface when the bracelet is turned off and turned on) to indicate that it is being bound.
You can use it after the binding is successful.
Question 2: How long does it take for Evey i5 smart bracelet to connect to Bluetooth? General reasons and solutions: First, it is generally believed that after Bluetooth is turned on, you can reach Bluetooth with your hands and successfully connect with it. Actually, this is not right. If a mobile phone searches for Bluetooth, Bluetooth must enter a special state: pairing state. 2. Specific operation steps: 1. Confirm that Bluetooth is turned off: press and hold the multifunction key for 2-3 seconds, and the Bluetooth indicates that the red light flashes quickly for about 3 times, that is, Bluetooth is turned off. 2. Bluetooth enters the pairing state: press and hold the multi-function key for 7-8 seconds, Bluetooth enters the pairing state, and the display indicator flashes alternately in red and blue or the indicator is always on. 3. After Bluetooth successfully enters the pairing state, the next operation is to enter the mobile phone: 1. Turn on the Bluetooth function of the mobile phone and search for the Bluetooth model. 2. The mobile phone is connected with Bluetooth. If you are prompted to enter the pin code, it is generally 0000 or 1234. 3. The pairing was successful. At this time, you can answer and make phone calls with Bluetooth. If Bluetooth supports A2DP protocol, it can also be used to listen to music.
Question 3: How does Charm Blue phone connect Evie bracelet? You need to download Evie assistant and connect it in Evie assistant.
Question 4: Why can't the Evey bracelet and tablet be connected? To connect the bracelet:
One: Download and install the APP "Zero One" supporting the bracelet on the mobile phone. Download method: APP store searches for "Zero One" to download and install.
Two: run "zero one". Register the user (by email) and log in.
Third, turn on the Bluetooth of the mobile phone, enter zero one, slide your finger from left to right on the main screen or click the sign of the menu in the upper left corner to bring up the main menu.
Enter "Device Binding"
Four: Light the bracelet at this time, click "Search", and the device name of the bracelet will be displayed in the device list:
Five: Click on the device name, and a prompt will pop up, indicating that the device is successfully bound and Bluetooth pairing is requested. Click OK and Match respectively.
6. After the connection is successful, the time on the bracelet should be consistent with the time on the mobile phone, and the exercise data such as steps, distance and calories will be synchronized to zero health. After the name of the interface device is bound, the zero one device displays "Connected".
PS: If the data is not synchronized after the above operations, refresh it several times (the fourth circle from top to bottom on the right side of the sports interface, and the two arrows circle the city).
Special instructions:
Apple's mobile phone is connected to the bracelet. When you see the "Bluetooth pairing request" pop up, click it. Otherwise, you can only synchronize the data, without phone calls and SMS reminders.
Other supplementary information:
1. If you have connected the bracelet before and find that you can't find the device when you connect it again, go to mobile phone-Settings-Bluetooth, ignore the bracelet, and then use zero one to search for binding. Because it is difficult to bind the bracelet when Bluetooth is paired, you should ignore the devices in Bluetooth before binding.
2. After the bracelet and the mobile phone are normally connected, there are no calls, SMS, WeChat, QQ and other reminders. Please check.
(1) zero one-whether the corresponding switch in message push has been turned on.
(2) Are the phones, messages, WeChat and QQ displayed above the mobile phone-settings-notification center, notification center and lock screen turned on?
(3) In the notification center, the locations of telephone, information, QQ and WeChat are changed to 10 or 5.
(4) On the mobile phone desktop, slide from top to bottom, enter the notification bar, and clear all notifications. Because if the number of notifications is too large, the number that the notification center can notify is limited, and if it exceeds it, it cannot be reminded.
Question 6: 6plus can connect the Bluetooth of Ivey i5 bracelet, but it can't bind 1. Turn off the Bluetooth of the mobile phone first; 2. Restart the bracelet (press the button on the bracelet until it vibrates for three times, then release it); 3. Enter the mobile phone-Settings-Bluetooth-Ignore the device, turn off Bluetooth and start scanning; 4. Go to 0 1 APP device bindings and search for bindings again.
Question 6: How does Evey bracelet make the alarm of mobile phone press the bracelet button for a long time until it vibrates 1 time before letting go, and the mobile phone makes an alarm? Only firmware version 1. 1.0.X is supported, and firmware version 7.7 and below is not supported. You must open the permission to allow zero one to access the sound, otherwise it will be invalid.
Question 7: How to synchronize the data of Evey bracelet to WeChat Sports Pro? I don't know which mobile phone and version of the system you are using. If it is Apple IOS8.3, you can synchronize data. By adding Evian data source to the mobile phone application "Health", WeChat will automatically synchronize with the health application data, so that it can synchronize with Evian data.
Question 8: Can the steps be synchronized after the smart bracelet that is not connected to the mobile phone is reconnected at home? The bracelet is Evie i5plus, which can be synchronized. I use Evie, even if I turn off the alarm clock.
Question 9: I found an Evie bracelet. Can I bind my mobile phone? To enable Bluetooth, I have to cancel my previous account in BONGXX before I can bind my current account.