Setting method of gigabit motherboard p43bios:
Generally, the computer motherboard is set up, and you can enter the BIOS by pressing the Del key all the time after booting. System boot BIOS is the basic input and output system of microcomputer, and it is a ROM chip integrated on the motherboard, which stores the most important basic input and output programs, system information settings, power-on self-check programs and system boot bootstrap programs of microcomputer system. You can see the BIOS ROM chip on the motherboard. The superior performance of a motherboard depends largely on whether the BIOS management function on the motherboard is advanced.
Before installing the operating system, it is necessary to set the BIOS so that the systems can be installed in order. BIOS is a set of programs solidified in the ROM chip on the motherboard, which stores the most important basic input/output programs of the computer, system setup information, self-test program and system bootstrapping program. After the computer is turned on, it will perform a POST. At this time, press the Delete key according to the system prompt to enter the BIOS program setting interface.
Different types of motherboards will enter the BIOS setup program in different ways. Please pay attention to the screen prompt after starting the machine for the specific input method.
Standard CMOS function: Use this option to set basic system configuration, such as time, date, IDE device and floppy disk drive parameters.
Advanced BIOS features: Use this option to set the advanced features of the system.
Advanced chipset features: This menu allows you to set the motherboard chipset.
Integrated peripherals: Settings for all peripherals. For example, whether the sound card, modem and USB keyboard are turned on.
Power management settings: set the operation mode of power saving function of CPU, hard disk and monitor.
PnP/PCI configuration: Set the parameters of the PnP plug-and-play interface and PCI interface of ISA. This function is only effective when the system supports PNP /PCI.
Health status of PC: it mainly displays related parameters such as voltage, temperature and fan speed automatically detected by the system, and can also set an alarm to automatically shut down when overloaded to prevent failures.
Frequency/voltage control: set the frequency doubling of CPU, and set whether to automatically detect the CPU frequency.
Load Failsafe Defaults: Use this option to load factory defaults for a stable system.
Load optimized default values: Use this option to load default values that have the best performance but may affect stability.
Set root password: Use this option to set the root password.
Set User Password: Use this option to set the user password.
Save & Exit Setup: Select this option to save the changes to the BIOS, and then exit Setup.
Exit without saving: If this option is selected, BIOS modification will be abandoned, that is, the installer will exit directly without saving.
Did you get a look at him? Gigabyte motherboard p43bios setting method? People also see the content:
1 .gigabit p43 motherboard bios setting method
2. bios settings of Gigabyte p43 motherboard.
3. How to set usb boot in Gigabyte p43 motherboard bios?
4. How to set the bios of ASUS p43 motherboard
5. How to brush bios for Gigabyte p4 series motherboards?
6. What cpu does Gigabyte p43 motherboard have?
7. What should I do if I can't start the Gigabit motherboard with a USB flash drive?
8. Setup method of bios password for ASUS p5l-mx motherboard