How about Fuya wall paint?
1. Fuya Enterprise is headquartered in Beijing, the capital of China. Its subsidiaries include Beijing Fuya Coatings Co., Ltd., Sichuan Fuya Coatings Co., Ltd., Fuya Boda (Beijing) Technology Co., Ltd. and Fuya Boda Decoration Engineering Co., Ltd.
2. In 2008, Fuya relied on "excluding VO? C, and its preparation method ",won the bid for the" Bird's Nest "project, the main venue of the 2008 Olympic Games. Fuysubhealth Paint also won the bid for other Olympic events: Peking University Gymnasium (Olympic Table Tennis Gymnasium), Guang 'an Gymnasium (Olympic Volleyball Training Gymnasium), Beihang Gymnasium (Olympic Weightlifting Gymnasium), National Convention Center (Olympic Fencing Gymnasium), 2 1 Century Swimming Pool, Yuetan Gymnasium and so on.
How to paint the wall finish
1, the interface agent must be brushed evenly.
2. Generally, cracks are stuck with kraft paper tape and white latex (but there is no guarantee that 100% will not crack again).
3. The uneven wall needs leveling. Gypsum is generally used, and the roughness should not exceed 0.5 cm.
4. Non-load-bearing walls such as general lightweight walls and thermal insulation walls need to be pasted. Try to choose better wall cloth and white latex. If possible, you can use grid cloth, which will have better anti-cracking effect.
5. It is better to choose putty with high particle fineness and hard texture, or add some white latex to the putty to improve the hardness of the putty.
6. Try to use fine sandpaper. Generally, 400-500 sandpaper is used for soft putty, and 360-400 sandpaper is better for hard putty (such as wall lining and easy leveling). If the sandpaper is too thick, it will leave a deep sand mark, which cannot be covered with paint. The polished wall must be thoroughly cleaned to avoid too much dust and affect the adhesion of paint. The concave-convex difference shall not exceed 3mm.
7. The primer must be brushed evenly to ensure that every part of the wall is brushed. If the wall eats a lot of paint, you can add a little more water to the primer to ensure uniform painting. Don't think that a roller is enough just because it is a primer. The brushing effect of primer will directly affect the effect of topcoat. Use a roller with the same texture as the top coat.
8. There will be some flaws (pits) after the putty is polished, which is difficult to see under normal circumstances. It will be obvious only after painting. At this time, it is necessary to mend. Pay attention to polishing and leveling, and then brush it again with a primer with a little water to avoid color difference caused by different water consumption from other walls when brushing the top coat.
9. The wall paint will dry 4 hours after brushing, but the dried paint film has not reached a certain hardness and needs nursing. It's simple. Do not scrub or touch the wall for 7- 10 days.
Conclusion: The above is the painting method of wall paint introduced by Bian Xiao in detail. I believe everyone should have a certain understanding of wall paint after reading it. You can choose some big brands when you choose, because the wall coatings of big brands are not only of good quality, but also of perfect after-sales service. If there are some quality problems during use, you can contact after-sales service for repair or replacement. I hope Bian Xiao's suggestion can help you choose the appropriate wall paint decoration method!
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~