1. Turn on the mobile data and select the network access point: drop down the top curtain menu-click the mobile data to turn green; Settings-Connection-Mobile Network-Access Point Name-Select the access point of the network.
2. Open Settings-Connect -WLAN Hotspots and Network * * * Enjoy-Mobile Hotspots-Slide to open, click on the upper right corner (upper right corner) More-Configure Mobile Hotspots-You can set the name, encryption method, password and hide my device.
3. Use another computer or mobile phone to search for local wireless hotspots and connect directly.
Note: If other devices can't search after the mobile phone turns on the mobile hotspot, it is recommended to check whether my device is turned on: Settings-Connection -WLAN Hotspot and Network * * * Enjoy-Mobile Hotspot-More in the upper right corner (upper right corner)-Configure Mobile Hotspot-Hide my device. Note: Some models do not support this function.
How does the mobile phone open the hotspot of the computer? After you open a hotspot on your mobile phone, you will have the name of the hotspot. After setting the password, you can use your computer to open the hotspot on the WIFI connection.
How a mobile phone opens a hotspot for a computer and how a telecom mobile phone opens a hotspot for other devices is the same as how the mobile phone itself uses traffic to access the Internet.
The hot function of telecom mobile phone is to convert the 3g network signal of mobile phone into a wifi network that can be used by both computers and mobile phones. The connected devices use the traffic in the mobile phone card, which is the same as that used by the mobile phone itself.
How to set laptop hotspot with mobile phone? A laptop with WIFI is not enough, even in places where wireless Internet access is provided. Wi-Fi？ WirelessFidelity, wireless fidelity technology, like Bluetooth technology, belongs to short-distance wireless technology used in office and home. This technology uses a frequency band of about 2.4GHz, which is currently a wireless frequency band without a license. At present, there are two available standards, namely IEEE802. 1 1a and IEEE 802.11b. This technology is favored by manufacturers because of its own advantages. The outstanding advantages of Wi-Fi technology are as follows: First, the coverage of radio waves is wide, and the coverage of radio waves based on Bluetooth technology is very small, with a radius of only about 50 feet? About 15 meters? And the radius of Wi-Fi can reach about 300 feet? About 100 meter? Needless to say, the office can be used in the whole building. Recently, Vivato Company introduced a new type of switch. It is reported that this product can make the current Wi-Fi wireless network reach 300 feet? Approaching 100 meter? Communication distance expanded to 4 miles? About 6.5 kilometers? . Secondly, although the wireless communication quality transmitted by Wi-Fi technology is not very good, the data security efficiency is worse than that of Bluetooth, and the transmission quality needs to be improved, the transmission speed is very fast, which can reach 1 1mbps, meeting the needs of personal and social informatization. Third, the threshold for manufacturers to enter this field is relatively low. Manufacturers only need to set up "hot spots" in crowded places such as airports, railway stations, coffee shops and libraries, and access the Internet to these places through high-speed lines. In this way, because the radio waves emitted by "hot spots" can reach the radius of tens of meters to 100 meters from the access point, users can surf the Internet at high speed as long as they enter this area with their laptops or PDA supporting wireless LAN. In other words, manufacturers do not have to spend money on network wiring access, thus saving a lot of costs. According to the standard of wireless network card, the speed of WIFI is different. Among them, the maximum value of IEEE802. 1 1b is1Mbps (some manufacturers can reach 22Mbps in the case of device matching), IEEE802. 1 1a is 54Mbps, and IEEE 802. WIFI is a wireless network composed of AP(Aess Point) and wireless network card. AP is generally called a bridge or access point, as a bridge between traditional wired LAN and wireless LAN. Therefore, any PC equipped with wireless network card can share the resources of wired local area network or even wide area network through AP, and its working principle is equivalent to a HUB or routing with a built-in wireless transmitter, and the wireless network card is the client device responsible for receiving the signals transmitted by AP. Compared with wired networks, there are many advantages: the main advantage of wireless WiFi is that it does not need wiring and is not limited by wiring conditions, which is very suitable for the needs of mobile office users and has a broad market prospect. At present, it has expanded from traditional special industries such as medical care, inventory control and management services to more industries, and even started to enter the fields of families and educational institutions. Health and safety IEEE802. 1 1 stipulates that the emission power shall not exceed 100 MW, and the actual emission power is about 60~70 MW. What kind of concept is this? The transmitting power of the mobile phone is about 200 MW to 1 W, and the handheld walkie-talkie is as high as 5 W. Unlike the mobile phone, it is absolutely safe to directly contact the human body and use wireless networks. Simple construction method Generally speaking, the basic equipment for building a wireless network is the wireless network card and AP, so that network resources can be shared with the existing wired architecture in a wireless way, and the installation cost and complicated procedures are far lower than those of the traditional wired network. If it's just a point-to-point network of several computers, you don't need an AP, just equip each computer with a wireless network card. AP is the abbreviation of AessPoint, which is generally translated as "wireless access node" or "bridge". It mainly acts as a bridge between wireless workstation and wired LAN in MAC of media access control layer. With AP, wireless workstations can connect to the network quickly and conveniently, just like hubs in general wired networks. Especially for the use of broadband, WiFi has more advantages. After the wired broadband network (ADSL, local area network, etc.). ) connect to your home, you can connect an AP, and then install a wireless network card in your computer. It is enough for ordinary families to have an AP. Even after the user's neighbor is authorized, he can surf the Internet in a * * * way without adding a port. Although the working distance of wireless WIFI is not large for long-distance work, the real working distance of 802. 1 1b can reach more than 100 meters under the condition of complete network construction, which solves the problems of data error correction and error code during high-speed movement, and well solves the problems of switching between WIFI devices and devices and base stations and security authentication. With the development of WiFi and the rapid growth of the number of wireless AP in the next two years, the convenience and efficiency of wireless network make it rapidly popular. In addition to AP in some public places at present, there are precedents for building MAN with wireless standards abroad. Therefore, the wireless status of WiFi will become stronger and stronger. WiFi is the mainstream standard of wireless access at present, but,
How to give it to the computer after the mobile phone is free of streaming? You can't open the hotspot directly. How to set it? If your phone turns on the wireless hotspot, other devices cannot connect to it. Suggestion:
1. Make sure that your mobile phone usage data can surf the Internet normally. Turn off the hotspot of your mobile phone and try to turn it on again.
2. Check whether other devices are allowed to connect: Settings-More Settings (Connect)-Network Sharing and Mobile Hotspot-Mobile WLAN Hotspot-After the slider opens, click the wireless hotspot name-Allow all devices (all devices).
3. Verify whether the wireless name and password of the connection are correct: reset the wireless name and password on the hotspot page of the mobile WLAN (menu key)-Configure, and try to change the name to English.
4. If the above operation still fails to connect, please try to connect another device for brand compatibility.
How to set the hotspot of computer wifi mobile phone connection? The WIFI phone on the computer can't receive it, but it can receive the same WIFI as the computer to realize wireless internet access.
Take the computer broadband as the divergence point and set it as the wifi hotspot received by the mobile phone? You are satisfied with this: VirtualRouterInstaller package. If it doesn't work, please contact me, or this connectify package will do.
Hope to adopt
How to buy a wireless network card (such as a USB flash drive) for a desktop computer,
After installation and normal use, you can automatically receive hotspots sent by your mobile phone, and you can use it normally by entering your password for the first time.
If it is a notebook, it comes with a wireless network card to automatically receive hot spots sent by mobile phones.
Hope to adopt!
The computer is broken, how to set the mobile phone wifi hotspot? Just take the router to a friend's house or sell the computer. You can't set up a WiFi hotspot without a computer or mobile phone. There is a hotspot setting in the mobile phone settings. Click it to be a hotspot. Others can connect to your mobile phone through wifi, both Android and Apple can.
How to set hotspots for mobile phones and computers;
1, download 360 free wifi 360 software housekeeper;
2. Install 360 free wifi, and double-click to execute 360 free WiFi;
3. Set relevant parameters.
(1.) Click Modify.
(2.)wifi name
(3.)wifi password
4. Open the mobile phone settings, enter the wireless network settings, and turn on the switch of the wireless network;
5. Find the wifi name you just set, fill in the password you set, join and wait for the connection.