Yingquan water takes municipal tap water as raw water. At the tap water end, the tap water is replaced by Yingquan healthy energy drinking machine. Through this drinking machine, tap water can be converted into healthy water that can be directly drunk, and the second revolution of drinking water, that is, the revolution of converting tap water into healthy water, can be realized.
Yingquan water is high-energy water, small molecule stable water and vital water. Because the Yingquan drinking machine is equipped with an energy conversion device, the cosmic energy can be converted into water supply through the energy stone, and 4 ~ 14um far infrared rays are radiated to the water body, so that macromolecular water can be converted into micromolecule water, that is, activated water with energy. Its O 17 nuclear magnetic resonance half-width (0 17 ~ NMR) is 68.27HZ, which is a veritable ideal small molecular water.
Yingquan water is weakly alkaline water, which is rich in minerals and trace elements needed by human body, and fully meets the nutritional and physiological needs of human body. Its weakly alkaline PH value is 7.2-7.8, and the dissolved oxygen reaches 9mg/L (30%-40% higher than tap water). There are three standards for healthy water: clean water, running water and whole water, and it has seven specific conditions. These three standards and seven conditions are realized by three systems composed of six-stage filter elements: purification system, activation system and overall system. Purification:
1, purification system: the core consists of four levels of filter elements: A, B, E and F; 2. Purification function: ① Purification function of the filtration membrane: The minimum pore size of the membrane reaches 0.0 1 micron through two stages: A and F.. The fineness of coarse filtration, fine filtration and ultrafiltration membrane separation of particles in water can be understood by particle separation spectrogram. From the point of view of safety and hygiene, ultrafiltration has met the requirements of water filtration and purification. It not only ensures safety and sanitation, but also ensures a certain amount of water, so that the product can work normally for a long time and will not be blocked prematurely, thus shortening the service life of the filter element. This is the main design idea of universal ultrafiltration instead of nanofiltration. Professional type requires solving the problem of hard water quality. Because the water contains excessive mineral inorganic salts, such as CaCO3, MgCO3, Ca2+ and Mg2+, the water quality is hard. Therefore, only by improving the precision of membrane filtration can the minimum pore size reach 0.00 1 micron (i.e. 1 nm). At the same time, in order not to affect the excess water, a booster pump is added to backwash the nanofiltration filter element. This is the main design idea of special nanofiltration.
2. Electrochemical treatment and purification: water pollution can be divided into: physical contamination: impurities such as sediment, rust, floating matter, suspended matter and colloid; Chemical pollution: pesticides, fertilizers, different colors, smells, various organic and inorganic pollution, etc. Biological pollution: bacteria, viruses, microorganisms, pathogens, etc. Heavy metal pollution: heavy metals, heavy metal compounds, radioactive substances, etc. Among them, heavy metals and organic pollution are the most harmful and the most difficult to remove. What are heavy metals? It refers to metals with a relative density greater than 4 or 5. At present, the heavy metals mentioned in pollution mainly refer to: mercury, cadmium, lead, chromium, arsenic and their compounds, which are collectively called "five poisons". Heavy metals cannot be degraded by microorganisms in water, but can only be transformed, dispersed and enriched among various forms. The solubility of heavy metal compounds is very small, and heavy metal ions are positively charged, so they are easily adsorbed by negatively charged colloidal particles in water. Although the colloid adsorbed with heavy metal ions can be separated by filtration membrane, free heavy metals and heavy metal compounds can still pass through ultrafiltration and nanofiltration membrane, so it is impossible to remove net weight metals only by ultrafiltration and nanofiltration membrane. KDF is a kind of high-purity copper-zinc alloy particles, which can form countless miniature batteries in water and purify water according to electrochemical reaction. We know that different metals have different electrode potentials. Copper and zinc with different electrode potentials are put into water to form an electrochemical system. Electrons on the zinc electrode with lower electrode potential will run to the copper electrode with higher electrode potential through the wire (water). As a result, too many negative charges are gathered on the copper electrode to form a cathode, and too many positive charges are left on the zinc electrode to form an anode, so an electric field is formed between two copper-zinc plates in water. According to the order of metal electrode potential, all heavy metal ions with potential higher than that of zinc electrode can get electrons on the copper electrode (cathode) and be reduced, and then plated on the copper electrode to form a new copper-heavy metal alloy, which is separated from the water. In the zinc layer (anode), only zinc releases electrons and is oxidized into zinc ions into water. Zinc ions easily combine with chloride ions to form zinc chloride. This not only removes the heavy metals in the water, but also removes the residual chlorine in the water. KDF can also kill bacteria and microorganisms and adjust the PH value of water. Therefore, KDF is an important purification medium for removing heavy metals and residual chlorine by electrochemical treatment. Whether KDF medium is used in purification equipment is an important sign to measure whether the equipment can effectively remove heavy metal pollution.
3. Adsorption and purification of activated carbon: Activated carbon is a porous substance with great adsorption capacity. Activated carbon can be divided into granular carbon and powdered carbon according to its appearance, and powdered carbon is mostly used for deep purification of water bodies. Activated carbon is an excellent adsorbent, which has a good adsorption capacity for nonpolar organic pollutants. It is often used to adsorb organic matter, abnormal color and odor in water, especially residual chlorine in water. According to the different raw materials of activated carbon, it can be divided into coconut shell, fruit shell, wood and sulfonated coal. According to the different processing technology, there are high efficiency, special effect, microcrystalline and silver-loaded activated carbon. Silver-loaded activated carbon has bactericidal and bacteriostatic effects. The combined use of activated carbon and KDF can greatly improve and prolong the purification effect and service life of activated carbon. Due to different raw materials, formulas and processing technologies, the value and efficacy of various activated carbons vary greatly. The specific surface area of high-quality microcrystalline carbon can reach 6000 ㎡/g, and its adsorption performance is excellent. It can be seen that tap water can completely remove any toxic, harmful and odorous substances in the water body through three purification functions: membrane separation, KDF electrochemical treatment and activated carbon adsorption, while retaining minerals and trace elements beneficial to human body, and it is really clean rather than pure. This is unmatched by ordinary water purifiers (often only containing 1 or two kinds of filter elements with purification function). Yingquan high-energy healthy water direct drinking machine is a healthy drinking water family terminal equipment that realizes the standard of healthy water in practice. Product appearance styles are diverse, and the movement design has two models: popular and luxury.
The first stage: high-quality precision filter element
The world-class high-quality 5 micron aperture precision filter element is used to pretreat tap water.
Thoroughly remove residues from water.
All kinds of tiny impurities, such as sediment and rust, have the special effects of large pollution capacity and good filtration effect.
The second stage: KDF (copper-zinc alloy+precision activated carbon) imported from the United States.
96% of water-soluble heavy metals such as lead, mercury and arsenic are removed, and zinc beneficial to human body is supplemented, which integrates adsorption and filtration. The removal rate of free chlorine and chloroform in water is as high as 96%, further removing residual pesticides in water. Fertilizer and radioactive substances, and has the functions of decoloration and deodorization. Deeply adsorb halogenated hydrocarbons and organic substances harmful to human body in water, and increase the sweetness of water. The filter element has a long service life and the metal removal rate is as high as 99%.
The third stage: food-grade ion exchange resin filter element
For areas with high water hardness, mix hard water with high calcium and magnesium content. Alternately converted into soft water, to avoid the human body from suffering from lithiasis due to long-term drinking of hard water.
The fourth stage: high-energy nano-biological multifunctional filter element
Nano-high-energy materials exclusively produced by high-tech technology were activated. Mineralization, weak alkalization, purification, ionization, oxidation resistance, negative potential, detoxification, antibacterial, sterilization and other functions in one, is the main shaft filter element of energy water machine, and generates water small molecular groups, ionization, negative potential against free radicals. Mineral water rich in trace elements has a mineral absorption rate of about 70%-90%. Because of its strong activity, it has always existed. Therefore, the solubility, penetration, diffusion, emulsification and cleaning power are extremely strong. Sweet taste, rich electrolyte, longer storage time than commercial mineral water, and unparalleled water quality.
Stage 5: trace element mineralizing filter element
It is rich in a variety of inorganic salts and more than 38 trace mineralized elements necessary for human body. It has good water solubility and ion exchange, and is the ultimate product of mineralized water.
Stage 6: antioxidant filter element (antibacterial dechlorination ball+compound reaction element ball)
Free radicals in the body are products of oxidation, so they can be removed by oxidation reduction. The lowest redox potential, the better the effect. High-energy activated water has ultra-low redox potential, which is the lowest in existing drinking water and can well scavenge free radicals.
The seventh stage: UF ultrafiltration fine molecular membrane hollow filter element.
The asymmetric semipermeable membrane made of ultra-micro pore polymer material is a hollow capillary tube, and the wall of the tube makes up for micropores. The physical screening process of separating liquid with the pore size of 100 nm can effectively remove bacteria, viruses and heat sources.
Eighth stage: light wave energy conversion filter element
According to the theory of human body's absorption of infrared light waves, the thermal effect of light waves generated by the action of infrared light waves with energy of 8-20um on water body can stimulate the vibration energy level of water molecules, thus activating the activity of nucleic acid protein biomacromolecules and restoring the function and balance of the body.
Stage 9: antibacterial silver-loaded rear filter element
Made of coconut shell in tropical rain forest, it has many pores inside, which can effectively inhibit bacteria, absorb odor and pigment to deeply treat organic and inorganic compounds, and eliminate cold viruses and other pathogens by using ions released by silver.
Tenth stage: high-energy and high-magnetic double-ring long-flow magnetized filter element
Using double-stage and double-sided high-magnetic composite magnetic steel technology, the liquid flowing in the closed loop is cut by magnetic wire for many times and at many positions, and the high magnetic flux can reach 3000 gauss. It makes the small molecules of water condense, has magnetic memory, and keeps the activity of water for a longer time, so it is non-reducing small molecule water.
explain