Diamond bracelets can be used as amulets, which can bring us good luck, get rid of all bad karma, and bless our safety and health. So, how long does the diamond bracelet take? What is the knitting method of diamond knot bracelet?
How long does the diamond bracelet take?
The amount of thread used is 14 times the length of the finished product, and about 2 m 3 is almost the same. If it is a diamond knot, 1 m 5 is definitely not enough, and the snake knot is almost the same. Ordinary diamond knots are ten times bigger. If you want to make a nine by nine diamond bracelet, you need 12-20 times the length of the bracelet. If the wrist circumference is 17.5 cm (seven inches) and the thread thickness is 0.2 cm, you need a thread about 2.2 meters long, including the end of the ox knot. Mainly depends on the size of Vajrayana Bodhi, divided into boys and girls: 20mm Vajrayana bracelets are generally around 65,438+03, and there are no auspicious numbers in Buddhism, so 65,438+065,438+0 seeds+Buddha heads, spacers and beads are generally used to make up for the lack of size. 23-25mm general 1 1 just don't need to be matched with other accessories; If it is bigger, it is usually made of beads, not bracelets. Girl: 20 mm
Weaving of diamond bracelet
1, make two rings first.
2. Pick up the right ring and pass under the left ring.
3. Adjust the tension as shown in the figure. A buttonhole is reserved, the size of which is matched with the final knitted buttonhole. Look at the knots in the picture. In the next knitting process, this side is always facing up and does not turn over.
The above is the beginning of knitting diamond knots. Next, weave a diamond knot and make a ring with a suitable rope, as shown in the figure. Pay attention to the relationship between this ring and the left rope. Don't make mistakes.
5. After completing the cycle, press the right rope on the left rope as shown in the figure.
6. After pressing, pick up the rope on the left and pass through the ring (the ring just made) from above, as shown in the figure.
Steps 7, 4-6 are diamond knots. According to this style of play, play 13.
8. From now on, it is the knitting method of double money knots.
9. Make a loop on the left rope as shown in the figure.
10. The right rope passes through the upper left, then it is wound and passes through the top ring from below, as shown in the figure.
1 1, or the right rope, as shown in the figure, passes through the central ring from above.
12, the right rope, passes through the right ring from below as shown in the figure.
Steps13,8-11are the ways to play double money knots, as shown in the figure. Next, continue to knit the diamond knot, and finally tie the button knot.
The above is about the diamond knot bracelet. If you want to knit a diamond knot bracelet but don't know how long and how to knit it, you can refer to the above contents about how long and how to knit it and try to knit it yourself.