Four, occupational hazard protection facilities,
Emergency rescue equipment maintenance and repair system
Construction project occupational hazard protection facilities must pass the "three simultaneities" acceptance.
Production units shall regularly inspect and maintain occupational hazard protection facilities to ensure their normal operation.
No one is allowed to dismantle or destroy occupational hazard protection facilities and signs at will.
If it is necessary to dismantle the protective facilities during equipment maintenance, the protective facilities should be restored to their original state after the maintenance and installation is completed.
The production unit shall properly protect the emergency rescue equipment (medical box, oxygen bag, stretcher, isolation respirator, etc.). ) is equipped by our company and shall not be damaged at will.
The company shall regularly monitor the emergency equipment and facilities, and the branch shall regularly inspect and maintain them to ensure that the emergency equipment and facilities are in good condition.
The equipped rescue equipment shall be registered and filed, managed by special personnel, and shall not be collected casually or damaged privately.
V. Labor protection articles
Management system of procurement, acceptance, distribution, use and scrapping
In order to standardize the management of labor protection articles, ensure the safety and health of workers, and protect workers from or reduce accidents and occupational hazards, this system is formulated according to the Labor Protection Articles Equipment Standard (Trial) issued by the State Economic and Trade Commission and combined with the actual situation of enterprises.
I. Procurement, storage and warehousing of labor protection articles
The supply department of the company is responsible for purchasing and keeping labor protection articles. The quality and performance of purchased labor protection articles must meet the national standards or industry standards, and special labor protection articles must have safety production licenses, product certificates and safety appraisal certificates; General labor protection articles should strictly implement their corresponding standards. The safety technology department of the company is responsible for the acceptance of the purchased labor protection articles, reviewing the qualifications of labor protection articles suppliers and product quality inspection materials, and the board of supervisors and trade unions organize supervision and inspection.
The storage and warehousing of labor protection articles shall be managed by the Supply Department in a unified way, and a special labor protection article storage warehouse shall be set up. Each warehouse is responsible for the storage, custody and daily management of labor protection articles, ensuring the storage safety of labor protection articles and preventing them from rotting. If insufficient inventory and incomplete varieties are found, they should report to the supply department in time and arrange procurement.
Second, the distribution of labor protection articles
(1) Distribution standard of labor protection articles.
The distribution standard and service cycle of labor protection articles shall be organized by the Safety Technology Department of the company, with the participation of labor protection articles evaluators, and formulated according to the labor protection articles equipment standard and the working environment and working conditions of various types of work in the enterprise, and equipped with labor protection articles with corresponding safety and health performance.
When the working conditions and working environment change, the payment standard should be adjusted in time to meet the needs of production. The management system and distribution standard of labor protection articles should generally be revised once.
Special labor protection articles necessary in production, such as safety helmet, safety belt, insulating protective articles, gas masks and dust masks, must be fully equipped according to the requirements of specific jobs and ensure the quality.
All personnel engaged in various operations or working in various working environments should be equipped with labor protection articles according to their main work and working environment.
, production management, scheduling, safety, security departments and other relevant personnel should be equipped with corresponding labor protection articles according to the production areas they often enter.
Enterprises should have public safety helmets and work clothes for foreign visitors, study and inspection personnel to borrow temporarily. Public labor protection articles should be kept clean and tidy, and kept by special personnel. If it is lost, it is necessary to find out the responsibility and compensate at a discount.
In the workplace where toxic and harmful gases may leak when production equipment is damaged or broken down, in addition to providing workers with routine labor protection articles, necessary anti-virus protective gear should be placed in a conspicuous position on the site for emergency use during escape and rescue. Employers should also have specialized personnel and special measures for regular maintenance to ensure that they are in a good standby state. , 1 2 3 4 5 6