(1) "On/Off" key: press power-on once for standby to enter the running state, and press power-off once after power-on to enter the shutdown standby state;
(2) "Mode" key: Press this key after startup, and the mode will cycle in the order of "automatic heating → automatic"; → low wind → stroke → high wind → automatic → refrigeration → dehumidification → air supply → control.
(3) "Wind Speed" key: Press this key, and the wind speed of the internal fan will circulate in an "automatic" way;
(4) "Wind direction" key: press this key, and the angle of the windshield will cycle in the order of "automatic position [4] → position [5] → automatic"; → Position [1] → Position [2] → Position [3] →
(5) "Swing Wind" key: Press this key to set the swing wind to circulate in two ways: continuous swing and inching;
(6) "Temperature ▼" key: press the set temperature to drop by one degree, the control range is 16℃-3 1℃, and there is no combination function;
(7) "Temperature ▲" key: according to the set temperature, the control range is 16℃-3 1℃, and there is no combo function;
(8) "Timing Start" key: After the time is set, press the "Timing Start" key, and the digital display area will display the last set timing start time. Adjust the set time by the "hour" key and "minute" key, and the air conditioner will start at the set time; Press the "Timing Start" key again to cancel the timing start setting;
(9) "Timed Shutdown" key: After setting the time, press the "Timed Shutdown" key in the startup state, and the digital display area will display the last set timed shutdown time. Adjust the set time by the "hour" key and "minute" key, and the air conditioner will be turned off at the set time; Press the "Timing Close" key again to cancel the timing close setting;
(10) "Hour" key: in the state of timing and time setting, click to add an hour, which has a combination function;
(1 1) "Minute" key: in the state of timing and time setting, press once to increase for ten minutes, with combo function;
(12) "Sleep" key: When this key is pressed, the sleep mode setting will be displayed on the remote control, and the symbol ""will always be displayed in the sleep display area, and the indoor fan will automatically turn to low wind speed. After 8 hours of sleep, the sleep symbol is cancelled and the indoor fan resumes its original wind speed operation; Press the "Sleep" key again or press the "Mode" key or "Wind Direction" key to exit the sleep function;
(13) "Reset" button: Press this button with a small round bar with a diameter of 1mm, and the remote controller will be restored to factory settings;
(14) "Time" key: Press this key with a small round bar with a diameter of 1mm to enter the time setting state. After the setting is completed, press this button again to indicate that the setting is complete and exit the time setting;
Note: Every time the remote control button is effectively operated, the symbol ""displayed on the LCD screen will light up for one second and then disappear.