There are two kinds of bubblers: internal thread and external thread, which are determined according to the number of thread teeth of the faucet. Generally, the diameter of the external thread bubbler is 23mm, and the diameter of the internal thread is 2 1mm, so the thread teeth can be installed, but it is difficult to be as long as the thread teeth of each faucet. Through the full mixing of flowing water and air, the water flow plays a role in foaming. When screwing with a bubbler, it is generally tight to the right and loose to the left. If you can't find this flat rubber band, you can also use it to keep it fresh.
Using a rubber band instead of a film, winding the rubber band several times on the bubbler can make more rubber bands, prevent slipping and protect the bubbler from being scratched. The possible reasons for the water bifurcation are: the water pressure is too low, or there is debris blocking or scale accumulation in the shower. Solution: Remove the shower head, take out the rubber gasket with filter screen at the shower entrance or clean the shower head for cleaning. After using the bubbler, water will be saved, because installing the bubbler faucet will save about 50% of water, so it will also save water bills and reduce living expenses every month.
However, some faucets have special filter element specifications, so when choosing, you can choose a bubbler with the right size according to the specifications of your own faucet, so as not to find that it is inconsistent with the specifications of the faucet after buying it, which will lead to the failure to install the bubbler. Both round and long can be used. Its foaming principle is the same, and no one is better. Through the full mixing of flowing water and air, the water flow plays a role in foaming. When screwing with a bubbler, it is generally tight to the right and loose to the left. It is generally recommended to shake well in other empty bottles first.