The construction site refers to the construction activities of industrial and civil engineering, such as housing construction, civil engineering, equipment installation and pipeline laying. The following is a template of on-site safety construction responsibility for you, which is for reference only and I hope it will help you.
1 template of responsibility book for site safety construction In order to ensure the health and life safety of construction personnel, strengthen food safety management at the construction site, clarify their respective responsibilities and prevent food poisoning accidents, this responsibility book is specially formulated:
1. In the construction process, we must strictly abide by the provisions of the National Food Hygiene Law, the Notice of Beijing Municipality on the Provisions on Food Safety Management in Construction Sites (for Trial Implementation) and other relevant laws and regulations. To ensure that the hygienic quality of food meets the requirements of relevant national hygienic standards.
Two, the person in charge of the project is the first person responsible for food safety. Responsible for the safety of food procurement, storage, transportation and processing in the site canteen. It is necessary to set up food safety management institutions and full-time and part-time food safety administrators.
Three, in the construction site to set up a canteen (including temporary canteen) must apply to the local health administrative department for health permit before construction.
Four, canteen cooking personnel must conduct regular health checks, and obtain the health inspection certificate and the relevant food hygiene knowledge training certificate before taking up their posts.
Five, the canteen must establish and improve the following food hygiene management system and ensure strict implementation.
(a) food raw materials procurement card, ticket system, establish the corresponding account.
(2) Warehouse management system and post responsibility system.
(three) the health management system of the canteen cooking processing management, tableware cleaning and disinfection and other processing links.
(4) Operating procedures and post responsibility system.
(five) health examination and health knowledge training for employees and patients transferred from the health management system.
Six, the site canteen must meet the following requirements:
(a) independent kitchen operation room and food storage room must be set up. There are separate washing pools for poultry meat and vegetables.
(2) The ceiling, walls and floors of the canteen must be made of mildew-proof, moisture-proof and waterproof materials. The wall materials should be top-grade and easy to clean, and the floors should be hardened and non-slip. The kitchen stove and its periphery are tiled, and the height of the tile is not less than1.5m. The food storage platform of the food storage room is more than 0.2m away from the wall and the ground. The air outlet of the window is more than 2 meters from the ground.
(3) The canteen must be equipped with necessary ventilation, refrigeration, disinfection, cleaning and other equipment and facilities, equipped with effective fly-proof, mouse-proof and dust-proof facilities, and the garbage disposal must meet the sanitary conditions and be removed in time.
Seven, canteen food processing must meet the following requirements:
(a) raw and cooked separately to prevent cross infection.
(2) Refrigeration of perishable food.
(three) it is forbidden to make and provide cold dishes in the canteen.
(four) it is forbidden to process and use livestock and poultry products that are deteriorated, toxic, dead, poisoned or unknown.
(5) It is forbidden to eat immature lentils.
(six) prohibit the purchase, storage and use of nitrite.
(seven) toxic and harmful substances and impurities shall not be stored in the food warehouse.
(eight) it is strictly forbidden to purchase food operated by unlicensed vendors.
Eight, the use of liquefied petroleum gas in the canteen should be purchased from enterprises that have obtained the Beijing gas business license, sign a safe gas supply agreement with them and ask for gas purchase vouchers, establish a safety management system for liquefied petroleum gas, and set up safety management personnel in the canteen to monitor the facilities and equipment of liquefied petroleum gas during use to prevent explosion and fire accidents.
Nine, once the canteen food safety accidents, in addition to take rescue measures, should immediately report to the county health bureau and actively cooperate with relevant departments to investigate and deal with food safety accidents.
X. This responsibility letter shall come into force as of the date of signing.
Company on-duty telephone number: _ _ _ _ _ _ _
Company Director (signature): _ _ _ _ _ _ _ _
Project Manager (signature): _ _ _ _ _ _ _
_ _ _ _ _ _ _ Engineering Company
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Site safety construction responsibility template 2 Party A (Project Department):
Party B (team):
In order to do a good job of fire safety in construction sites, warehouses, etc. , to ensure that the site personnel and property are not harmed by fire, the project department and the construction team sign the following fire safety responsibility agreement:
1. Party A is responsible for establishing and implementing the fire prevention responsibility system and management system, educating Party B on fire safety and popularizing fire prevention knowledge.
2. Party A shall set up fire control facilities as required and do a good job of maintenance.
3. Party B must conscientiously implement the fire prevention responsibility system and management system, earnestly study fire prevention knowledge and improve fire prevention awareness.
4, regular fire safety inspection, found that the fire hidden danger should be rectified immediately, for a while can't rectification, shall immediately notify Party A, organized and coordinated by Party A to solve.
5. Party B's construction or domestic electricity consumption must be strictly implemented in accordance with the norms and procedures, and it is strictly forbidden to install and maintain electrical equipment without authorization and to pull and connect it indiscriminately.
6. Party B must inform Party A when using naked flame in production, and can use naked flame only after going through the examination and approval procedures and having a hot work guardian present.
7. Party B shall not use electric stoves, coal stoves, oil lamps and other appliances that are not conducive to fire safety in the living quarters, and shall not throw cigarette butts and pile up inflammable and explosive articles at will.
8. If the construction site, warehouse and living quarters violate the regulations and cause fire accidents, Party A will impose a fine of100-5,000 yuan on Party B, and hand it over to the relevant departments for handling according to the seriousness.
9. This responsibility letter is made in duplicate, with each party holding one copy.
Representative of Party A: Representative of Party B:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
On-site safety construction responsibility template III According to the company's 20__ year safety production work arrangement and the requirements of the Measures for the Administration of Safety Production, in order to earnestly implement the responsibility system for safety production, effectively prevent all kinds of safety accidents and ensure the smooth realization of safety objectives this year, the project manager and the project doorman (safety) personnel signed the responsibility book for safety production as follows:
I. Project Safety Objectives
1. accident control objective: put an end to death and serious injury accidents, and the young injury rate shall not exceed10 ‰; Avoid fire and mechanical accidents;
2. On-site safety objective: strictly control the mechanical and electrical operations with "three violations", poor protection, illness and fire hazards, and set up various safety protection facilities on site in a timely, complete and effective manner, with the qualified rate reaching100%;
3. Site environmental objectives: site layout is standardized, materials are stacked neatly, machines and tools are placed orderly, the environment is clean and tidy, signs and signs are complete, green construction is carried out, and Shanxi Province's safety and quality standardization site is actively created.
Second, the guard (security) personnel decomposition management objectives
1. No death, serious injury, minor injury or fire accident caused by my dereliction of duty;
2. No material losses, criminal cases, on-site chaos and environmental pollution caused by my dereliction of duty.
Three, the guard (security) personnel safety management responsibilities
1. Stick to your posts, wear helmet armbands, keep your clothes and hats clean and polite. Responsible for checking, inquiring and registering people, vehicles and articles entering and leaving the site, and checking when leaving the site. Materials should have exit permit issued by the project department to prevent stolen goods from being brought out;
2. Familiar construction personnel and personnel of this unit shall enter the site for direct release. Strangers should check their certificates, and foreign office workers should obtain the consent of the person they are looking for to register and wear safety helmets before entering the door, and refuse irrelevant personnel to enter the site casually; ?
3 on-site inspection or guards shall implement the system of on-time inspection and on-time handover. Before the arrival of the successor, the last group of personnel shall not leave their posts. Handover should be clear and recorded.
4. The doorman should pay attention to protect the safety and health inside and outside the door. It is forbidden to leave your post without permission. When on duty, even if no one is on duty, you are not allowed to sleep, lie down or do other things that affect your normal work. Others refused to stay in the guard room for a long time to chat.
5. The doorman is responsible for directing foreign vehicles to park in the designated place, which shall be neat and tidy, and shall not be parked at will, which will affect the normal construction and traffic;
6. No one is allowed to enter the work site without a helmet;
7. Inside and outside the gate and gatehouse 10m is the health responsibility area of the doorman. The general dust and garbage in this area should be cleaned and kept clean by the doorman at any time. If there is any serious waste overflow, the doorman should report to the project foreman in time and send someone to clean it up.
8. If there is mud or sand spilling on the transport vehicle leaving the site, the doorman should remind the driver to release it after the vehicle is washed or covered tightly to prevent environmental pollution at the gate;
9. Security patrol or security guards should strictly abide by their job responsibilities, and report to the project manager in time if they find any abnormal situations and security risks such as theft, destruction, fire hazards, personnel violation, nuisance and entanglement.
Signature of the Minister of Security:
Signature of person in charge (scaffolder):
_ _ _ _ _ _ _ _ _ _ _ _ _
In order to further strengthen the food safety management of the canteen on the construction site, define the responsible subject, implement the management responsibility, prevent food poisoning, and ensure the health and life safety of the construction personnel on the construction site, _ _ _ _ _ _ _ _ _ _ _ signed the food safety responsibility book:
Responsibility target:
1, conscientiously implement the national laws, regulations and rules related to on-site food safety, and be responsible for the food safety management of this unit.
2. Establish a food safety responsibility system, with the chief supervision engineer as the first person responsible for food safety management.
3, set up full-time food safety management personnel, establish and improve the food safety management system, and ensure that the system is implemented.
4. To open a canteen on site, you must obtain a catering service license, keep the environment clean and tidy, and operate in strict accordance with the relevant requirements of food safety.
5, the implementation of canteen contract management services, should establish and improve the qualification access system, in strict accordance with the relevant provisions.
6. Purchases food and raw materials in the canteen of the construction site in strict accordance with the Regulations on the Management of Obtaining Licenses and Tickets for Catering Service Food Procurement, and purchases qualified products provided by producers and operators with complete licenses, and obtains licenses and tickets according to regulations, and records the purchase ledger with certificates.
7. Conduct food safety training for managers and employees according to regulations to ensure that employees hold valid health certificates for post operation.
8, often supervise the implementation of the canteen related system, timely rectification of food safety rectification opinions put forward by the management department, the construction department and the health supervision department.
9. Do a good job in food safety education and publicity.
10. Establish an emergency plan for food safety. Once a food poisoning accident occurs, it is necessary to truthfully report and immediately keep the scene, take effective measures to prevent the food poisoning accident from expanding, immediately organize personnel to rescue patients, and actively cooperate with health supervision and disease prevention and control departments to investigate and deal with food poisoning.
1 1. The general supervision engineer's office shall sign a food safety responsibility letter with all contractors to implement the food safety system layer by layer.
12. This responsibility book is made in duplicate, each party holds one copy, and the implementation is supervised. This responsibility book shall come into effect as of the date of signature.
Signature of the person in charge of the project office: _ _ _ _ _ _ (seal)
Signature of Chief Supervision Engineer: _ _ _ _ _ _ (seal)
Date: _ _ _ _ _ _
In order to make the normal work on site go smoothly, we should adhere to the policy of putting prevention first, and prohibit food poisoning and outbreak of infectious diseases to ensure the safety of employees on site. Establish the idea of "health first, safety first", strengthen the awareness of safety work, and implement food safety work. This site has signed the following safety work target responsibility letter with the canteen staff:
1, food procurement personnel should have a relatively fixed food supply point to purchase. Ensure the quality and freshness of food, and it is strictly forbidden to purchase food and raw materials that have deteriorated and exceeded the shelf life.
2. Cookers must use fresh raw materials to make food, and all ingredients must be cleaned before cooking every day. Processed food must be steamed, and it is strictly forbidden to supply leftovers.
3. Cookware must be cooked separately during food processing, cleaned and stored after use, and disinfected when necessary.
4. The remaining finished and semi-finished products in the canteen must be raw, cooked, separated from meat and vegetables, layered, refrigerated and frozen.
5. Cooking utensils must be cleaned and disinfected strictly after each meal, and cleaning measures should be implemented.
6. Disinfect the internal and external environment of the canteen regularly, and carry out general cleaning to reduce or eliminate mosquitoes and flies.
7. Operate the cooker in strict accordance with the specifications, check and maintain it regularly, and report any damage in time.
8, canteen staff strictly pay attention to personal hygiene, smoking is not allowed in the canteen. Idle people are not allowed in.
9, canteen staff mixing cold dishes, must bring disposable gloves, never allow direct contact with food by hand.
10, due to irresponsible work, dereliction of duty, food poisoning incident, will be investigated for responsibility according to the situation.
This Responsibility Letter is made in triplicate, one for myself, one for the office and one for the deputy general manager in charge, and shall be implemented as of _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
Person in charge (signature): _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _
On-site safety construction responsibility template 6 Party A: Party B:
In order to implement the safety production policy of "safety first, prevention first", ensure the implementation of various construction safety measures, ensure the smooth progress of engineering construction, and ensure the personal health and safety of on-site operators. According to "Safety Production Law" and other relevant laws and regulations, combined with the actual situation of this project, both parties signed this responsibility letter on matters related to the safety construction of this project through consultation.
First, the project safety production management objectives
1, seriously implement the national laws, regulations and rules and regulations on safety in production. Adhere to the policy of "safety first, prevention first", strengthen safety management and ensure safe production.
2, put an end to fatal accidents, put an end to major mechanical equipment, poisoning, traffic and fire accidents.
3, put an end to fatal accidents, avoid serious injuries, the serious injury rate is less than 0.3‰, reduce minor injuries, and the annual industrial injury frequency is less than 10‰.
4. Seriously study and implement the JGJ59-99 standard of the Ministry of Construction to ensure that this project can reach the qualified standardized site.
Two. Safety responsibilities of Party A (captain or team leader):
1, strictly abide by the safety laws and regulations and the relevant responsibility system for production safety, arrange the work reasonably according to the technical, physical and ideological conditions of the team members, and do a good job in safety technical disclosure. When a team assigns two or more jobs, a temporary person in charge must be appointed to take charge of the safety work and be responsible for the safety team.
2, organize team members to learn safety technology operating rules, carry out safety activities, adhere to the safety speech before class, explain the matters needing attention in detail, and fill in the team activity record every day.
3. Conduct on-site safety education for the newly transferred workers, be familiar with the environment and posts, and designate special personnel to be responsible for personal safety.
4, often check the safety production site, handle or report in time when problems are found.
5, urge the workers on duty to use personal protective equipment correctly.
6, education team members stick to their posts, not illegal command, not illegal operation, not in violation of labor discipline, at the same time to do a good job of self-inspection, mutual inspection, handover inspection.
7. Obey the unified coordination and management of the project department personnel, be responsible for the civilized construction in the construction area, and ensure that the regional civilization and environmental sanitation meet the standards.
8, inductrial injury accident to rescue immediately, to record in detail and report in time, organize the class personnel to carefully analyze the reasons, put forward preventive measures, major casualty accidents to protect the scene and report in time.
Three. Safety responsibilities of Party B (team member):
1, the worker is the first person responsible for production safety in this position, and is responsible for the safety of himself, the environment and others in his work.
2, keep in mind the safety in production, everyone's responsibility, prevention first, safety first policy, to participate in safety activities, know safety education.
3. Seriously study and master the safety operation procedures and related safety knowledge of this type of work, conscientiously implement the requirements of safety technical disclosure, and obey the supervision and guidance of safety production management personnel with an open mind.
4, the correct use of protective, cold supplies and safety production equipment, take care of the safety signs of safety facilities, obey the distribution, stick to their posts, do not arbitrarily start the mechanical and electrical equipment operated by others, and strictly abide by job responsibilities and safety operation procedures.
5. Do not drink for four hours before going to work; Strictly implement the "three-work system" and improve the safety production level of self-prevention, mutual prevention and joint control.
6, check the tools and equipment used before going to work, after work for cleaning, maintenance, maintenance, found unsafe factors in the work, to immediately report to the class, team leader, and put forward suggestions for improvement.
7, beware of safety accidents, to ensure the realization of the goal of safe production, in the event of an accident, the courage to rescue, and immediately report to the superior.
8. In case of an accident or near-miss accident, immediately report to the team leader, participate in accident analysis, draw lessons from the accident, and put forward reasonable suggestions for improving safety production and working conditions.
9. Have the right to report all the information about safety in production, and have the right to refuse the construction in case of serious personal danger and no guarantee measures, and report it immediately or to the relevant departments.
Fourth, others:
1. After signing, it means that both parties (responsible persons) are familiar with the safety responsibilities of this post and are willing to earnestly perform them.
2. This responsibility letter shall come into effect and be terminated as of the date of signing, and shall be terminated at the same time after the expiration or termination of the labor contract of the team (worker).
3. Number of copies: This agreement is made in triplicate, with the same effect. One for Party A, one for Party B and one for Project Department.
Party A: (Seal) Party B: (Seal)
Representative: (signature) Project Manager: (signature)
In order to conscientiously implement the policy of safety first and prevention first, and strengthen the management of production safety, this responsibility is formulated in accordance with national and provincial laws and regulations on production safety.
Party A: _ _
Party B: _ _
I. Responsibility of Party A
1, conscientiously implement the national, provincial and _ _ _ safety guidelines, policies and regulations;
2. Regularly inspect, supervise and guide the safety production of subordinate units;
3, seriously investigate and deal with major safety accidents, and urge the rectification of major accidents;
4, organize safety education, summarize and popularize the advanced experience of safety production;
5. Organize safety production appraisal competitions, commend advanced collectives and individuals in safety production work, and promote the development of safety production work.
Two. Party B's responsibilities
1, organize the implementation. The first person in charge of the unit personally pays attention to safety work, and the safety organization is sound and equipped with safety inspectors;
2, ideological implementation. Carry out in-depth and extensive publicity and education activities on safety production for employees and their families, popularize safety knowledge education, vigorously publicize good deeds and advanced models emerging in safety production work, and enable employees to firmly establish the idea of safety first;
3. Implementation of measures. Conduct regular safety inspections, find hidden dangers in time, put forward rectification measures, and eliminate all unsafe factors in the bud; Take timely measures for accidents to minimize economic losses; Investigate and analyze the cause of the accident, clarify the responsibility, put forward handling opinions, and report to the X Safety Committee for approval and implementation;
4. System implementation. Conscientiously implement the guidelines, policies and regulations of the party and the state on production safety, and establish and improve various safety management systems in light of the actual situation of the unit, so as to have rules to follow, clear rewards and punishments, and strengthen supervision and management;
5. Responsibility implementation. It is necessary to establish a post responsibility system for safety production at all levels, clarify the division of labor and responsibilities, and carry out their duties.
Three. target
1, catastrophic accidents and major accidents are zero;
2, the general accident mortality and serious injury rate is 0;
3 major accidents rectification rate of more than 95%, the general accident rectification rate of more than 90%;
4, special operations personnel certificate rate100%;
5. The accident timely resolution rate is 100%.
Fourth, rewards and punishments.
1. In case of serious casualty accident, the salary of this unit cannot be promoted in the current year, and the person in charge of safety cannot be promoted by withholding the annual bonus until the disciplinary responsibility and criminal responsibility are investigated.
2. 2% of the total wages of the unit and 1% of the total wages will be deducted from the excess mortality rate and serious injury rate, and the person in charge of safety will be deducted for three months or one month respectively;
3, economic loss accidents, resulting in direct economic losses of more than 654.38+10,000 yuan but less than 500,000 yuan, the person in charge of safety shall be fined for half a year; If the direct economic loss is between 500,000 yuan and 654.38 million yuan, the annual bonus of the person in charge of safety will be deducted and the bonus of all employees will be deducted for three months;
4. If the casualty accident is not reported in time, the person in charge of safety will be fined 100~200 yuan, and if the accident is not reported or the investigation is hindered, it will be fined 300~500 yuan;
5, no accidents throughout the year, accident hidden danger rectification rate reached 100% units, according to the production and operation of the year-end assessment results to cash bonuses, political achievements as an important basis for assessment and promotion.
Term of responsibility: x _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party A: (signature and seal of the person in charge of the unit)
Date of Signing: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Party B: (signature and seal of the person in charge of the unit)
Date of signing
_ _ _ _ _ _ _ _ _ _ _ _ _
Template 8 of Responsibility Letter for Site Safety Construction In order to further implement the policy of safety first and prevention first, strengthen safety management, and ensure the smooth progress of engineering construction and production and the happiness of employees' families, this Safety Responsibility Letter is specially signed through consultation between both parties.
Article 1: Both parties to the letter of responsibility:
Party A:
On behalf of:
Party B:
On behalf of:
Article 2: Party A and Party B should conscientiously implement the policies and regulations on production safety, strengthen safety awareness, improve the project management level by improving the system and strengthening prevention, and carry forward the spirit of "three dares" to manage, grasp and dispose, so as to achieve the purpose of production safety.
Article 3 The term of the responsibility book for production safety:
1, from the construction site to the completion of this type of work.
Article 4: Responsibilities and obligations of Party A:
1, overall arrangement and management of work safety, be responsible for daily inspection of work safety, and urge the found problems and weak links to be rectified within a time limit. Responsible for X2 civilized construction site, safety production appraisal activities, safety production hundred-day activities, safety knowledge contest activities, timely summary and communication, rewarding the excellent and punishing the poor.
3. Party A shall promptly answer the safety problems raised by Party B or solve them within three days.
4. Be responsible for Party B's safety technical disclosure and three-level safety education before construction.
5. Timely convey to Party B the spirit of documents related to production safety from the superior and local government departments.
Article 5: Responsibilities and indicators of Party B:
1, put an end to major casualty accidents (including equipment accidents), and control the general accident frequency within 1.
2, set up a part-time security officer, responsible for participating in the safety production activities of the project department and presiding over the safety production work of this team, and establish a safety account in time.
3. Be responsible for the three-level safety education for new employees and the reasonable collocation of new and old employees in the team, which plays a role in passing, helping and bringing new employees.
4, team members should be relatively fixed, shall not be arbitrarily recruit social idle personnel or unidentified personnel to enter the team, personnel without three certificates shall not enter the construction site.
5. We should conscientiously implement the labor protection regulations, pay corresponding wages, equip employees with labor protection articles, and pay attention to the physical, psychological and ideological trends of shift workers at any time.
6. We should conscientiously carry out the "three posts and one evaluation" safety activities and conduct regular or irregular safety education for employees.
7. Special work must be operated by personnel with valid professional certificates. It is forbidden to operate all the equipment and supports of other types of work without authorization. (such as startup, power on, disassembly, etc.). )
Article 6, rewards and punishment
1. When a team or individual wins the safety production award from the superior department or the group company, all the awards will go to the team or individual.
2. Workers who generally violate the operating rules will be punished by 20- 100 yuan/time. Those who violate the rules for more than 3 times in a month will be dismissed.
3. The special type of workers who violate the operating rules will be punished by 50-200 yuan/time, and those who violate the rules for more than three times will be dismissed.
4, the construction team should consciously do a good job of cleaning up the legacy, timely removal of construction waste, if you don't listen to the instructions of the construction personnel, impose a fine of 100-200 yuan/time, if it affects the next working procedure, depending on the seriousness, impose a fine of 200- 1000 yuan/time.
5. The construction personnel must wear safety helmets, or they will be fined 50 yuan/time.
6. It is forbidden to carry people in the material hoist. Passengers will be fined 200 yuan, and those who start the machine will be fined 200 yuan.
7. It is forbidden to connect wires, stay wires and burn electric furnaces without permission. If found, the party concerned will be fined 200 yuan.
8. It is forbidden to urinate anywhere on the construction site. If found, the urinator will be fined 20 yuan, and the defecator will be fined 50 yuan, and they will clean themselves up.
9. When working high above the ground, it is forbidden to throw sundries outward and downward. If throwing objects intentionally, 200 yuan will be fined every time. In case of safety accidents, the parties concerned will bear full responsibility.
10, scaffolding, protective railings, bamboo fences, safety nets, etc. It is not allowed to be dismantled without authorization. If it needs to be dismantled, it must be approved by the person in charge of construction technology. If it is dismantled without authorization, the party concerned will be fined 100 yuan.
1 1. Take care of public safety facilities (fire fighting equipment, sanitary ware, signs, etc.). ) the scene. If there is any damage, compensate according to the price. In case of intentional damage, in addition to compensation for losses, a fine of 50-500 yuan will be imposed.
_ _ _, it is everyone's responsibility to protect construction products (finished products), and intentional damage is not allowed. If found, in addition to compensation for losses, a fine of 100- 1000 yuan will be imposed, and those who are serious will be removed from the field and their corresponding responsibilities will be investigated.
We should abide by the law. Anyone found to have stolen public property on the construction site will be punished twice (fined 2-5 times the value of the stolen property), and those with large amount or serious circumstances will be handed over to the public security organs for handling.
Article 7. This Responsibility Letter is made in duplicate, one for Party A and Party B, signed by the representatives of both parties, and takes effect before the team completes the settlement and all exits.
Party A: _ _
Representative: _ _
Party B: _ _
Representative: _ _
_ _ _ _ _ _ _ _ _ _ _ _ _