1, wooden floor can automatically adjust indoor temperature and humidity, reduce the occurrence of rheumatic diseases, and because of its small thermal conductivity, it has the effect of warm in winter and cool in summer (excellent thermal insulation effect). No matter at any time of the year, people will feel very comfortable sitting on the wooden floor, and will not feel cold and chill like tiles, especially suitable for families with old people and children.
2. At present, large wooden floor enterprises are trying to purify formaldehyde, and the negative ion floor on the market can effectively purify indoor formaldehyde. The wooden floor can release air, which is good for health.
3. The wooden floor has the functions of sound absorption, sound insulation, sound pressure reduction and residual sound time reduction, thus reducing the pollution caused by noise pollution. At the same time, the solid wood floor is moderate in hardness, rough and smooth, which can play a buffering role and avoid the danger of old people and children falling.
Second, what are the steps for paving the floor?
1, clean up the construction site, clean up the garbage on the ground, including every corner.
2, the ground leveling, horizontal error can't exceed 2mm, if more than, must find a way to level. If the ground is uneven, of course, the floor will not feel good after being paved. Then the protruding or uneven parts of the ground, such as edges and corners, are trimmed.
3. After the floor is cleaned, it is to lay a moisture-proof layer to prevent the floor from getting wet in the future. The moistureproof layer should be smooth and the joints should be tight.
4. The next work is to officially start installing the floor, because the floor is to be installed randomly. First of all, it must be paved in advance. Part of the floor will be divided into two parts, and it should be sawed according to the size. If there are too many saws, the floor loss will be great.
5. Before sawing the floor, all the floors can be unpacked, and the floors with problems or defects can be picked out for sawing, so that some of the floors with problems can be effectively utilized without causing excessive losses. Don't take the floor to saw when coming up, it will increase the loss.
6. The location of sawing the floor must be selected in places with tiles such as balconies to take care of hygiene, otherwise flying wood ash will enter any place and it will be difficult to clean up.
7. When laying, the short block should be laid next to the long block, so that the cross-laid floor can be bitten and not easily loosened. After the floor is assembled, it should be knocked tightly with tools.
8. After the floor is paved, the next step is to install battens. Generally, the floor is higher than the ground. What kind of high and low layering should be used? The floor is as flat as the ground. Use this kind of flat wood.
Click on the golden egg to win the grand prize!