First, press and hold the drain switch and remove the water storage container.
After removing the water storage container, open the upper water storage cover, fill it with water, then cover it and put the water storage container back in place.
Second, install and remove pants clips.
Installation: Press the black button once to loosen the locating plate of the trouser clip. Then insert the small square at the back end into the slot and push it down until you hear a bang, which means that the small square at the front end has been inserted into the slot.
Disassembly: Hold the ironing brush with both hands, hold the trouser clip with your thumb and pull it back until you hear a bang, and then take out the trouser clip.
Application mode
Turn on the power, the red power indicator lights up, and the heater starts to heat. When the red light goes out, it can be used. When in use, the steam button is pressed and released rhythmically every 2 seconds, so that the front nozzle generates a large amount of continuous high-temperature and high-pressure steam. Note: The faster you press it, the more steam will temporarily increase, but the temperature of the ironing brush will be lower, which may make the ironing brush steam insufficient.
Especially when ironing clothes, it is more appropriate to press out steam slowly to ensure that steam with higher temperature is generated, so that ironing clothes is easier.
It is normal that the body will generate heat during the operation of this product. This product is equipped with over-temperature protector, which is safe and reliable. )
Matters needing attention
Before using the steam ironing brush, you should know the basic safety measures, including the following:
1. Please read the instructions carefully and check whether the voltage is consistent with this product.
2. In order to prevent hot water from flowing out of the steam hole, try to spray it in the direction of no one before each use.
3. Don't immerse the steam brush in water or other liquid to avoid electric shock.
4. Don't unplug the wire when unplugging the power supply, but grab the plug and unplug it from the socket.
5. Don't let the wire touch hot objects. When putting away the hot brush, let it cool completely before putting it in the bag. The wire should also be wound on the steam brush.
6. After use, pour out the excess water in the ironing brush water tank.
7. Please do not continue to use this product under any damage, and do not disassemble this product to avoid electric shock.
8. When connecting the power supply, please pay close attention not to let children touch the bottom plate and the cable.
9. Don't use it on the clothes you wear, especially in summer. Don't aim the steam at the human body to avoid scalding.
10, hot water or steam may burn you. Do not put the steam outlet of the ironing brush in front of your hand, and operate safely.
1 1, when pouring water or adding water, be sure to unplug the power plug.
12. When pressing the steam button, control the frequency. When it is too fast, water will easily drip from the nozzle. When it is too slow, the steam is insufficient, and it is basically kept at about 2 seconds at a time.
13. Remove the brush head when ironing.
14. When using this ironing brush, pure water or cold water is needed.
15, this product is for family use only.
16, according to the installed brush head, wool on sweater and rabbit sweater, etc. Stick it on pants and clothes, and use a suction brush to touch the clothes in the direction of the arrow to suck off the hair on your body. You don't need to press the steam switch when sucking hair.
(1) If the power cord is damaged, you must replace the special cable or special components bought from the maintenance department of other manufacturers.
(2) After the machine is connected to the power supply, someone must take care of it.
17, put on clips and iron the neckline, trousers and tie of the suit.
Cleaning and maintenance
1. If the steam injection hole is blocked or blocked during use, which may be caused by impure water, immediately unplug the power plug, and after the main engine is cooled, insert the needle into the small hole to make the steam injection hole unblocked. Can continue to use.
2. After use, wipe the fuselage with a rag, and do not immerse it in water for cleaning.
Product features:
1, this model has many functions, such as ironing, dry cleaning and hair removal. Necessary at home, more convenient to carry on business trip. When in use, you don't need to iron the clothes board, you can iron it wherever you hang it, and the tedious housework can be easily done. 2, suitable for any fabric, without temperature adjustment, through the high temperature and high pressure steam through the clothes, wrinkles naturally open, without any damage to the clothes, always keep brand-new.
3, constant temperature intelligent design, whether you are a novice or an old hand, you will not burn your clothes, so that you can experience the new fun of ironing life.
4, one machine is multi-purpose, and the prepared dusting brush head can remove hair and dust (especially dark clothes, cashmere and woolen clothes) that are not easy to remove when you usually stick to clothes.
5, through steam absorption and volatilization, it plays the role of dry cleaning and disinfection.
explain
1. Press and hold the drain switch and remove the water storage container.
2. After removing the water storage container, open the upper water storage cover, fill it with water and cover it.
3. Replace the water storage container.
4. When ironing clothes, hang the clothes and move them up and down with an ironing brush in one hand, so that the wrinkles on the clothes can be ironed very easily, and the brush can also suck away the hair and dust stuck to the clothes.
5. Suitable for ironing clothes of various materials. Only fibers and woolen fabrics containing acrylic acid cannot use this product.
6. Install clips to iron the neckline, trousers and tie of the suit.