With the continuous progress of society, more and more people will use the responsibility letter, which is a system established through assessment and rewards and punishments according to the prescribed work standards. So do you really know how to make a responsibility book? The following is the safety team responsibility book (6 general remarks) that I compiled, which is for reference only and I hope it will help you.
Safety shift responsibility book 1 This safety production responsibility book is specially formulated to strengthen the safety target management of shift construction, ensure that the shift effectively implements various safety measures, ensure that the shift construction is accident-free, implement the principle of "whoever is in charge is responsible" and implement responsibilities.
I. Target indicators:
1, no death, no serious injury, no fire, and the accident rate of minor injuries is 3‰.
2. The employee safety education rate is 100%.
3, partial, each working procedure safety disclosure rate 100%.
Second, to ensure that measures:
The construction team leader is the key figure in safe construction. He should be familiar with and entertain the situation of the construction site, the ideological status of the team members, the changes in the construction environment and the mobilization of the team members. Therefore:
1, the team leader is the first responsible person in security team, taking full responsibility for construction safety. Therefore, we must resolutely implement the safety production guidelines and policies of "safety first, prevention first and comprehensive treatment", fully implement the national labor law, strengthen safety management, and accept the safety inspection and guidance of the company, the project department and relevant departments.
2, responsible for the safety and health of team members, familiar with the team members' thoughts, skills, physical condition, etc. We should arrange suitable work according to everyone's actual situation.
3, study hard technology, education team members familiar with the operating rules of this type of work, strictly implement the rules and regulations of production safety, in any case, shall not be reckless, have the right to refuse all illegal instructions, and can report to the superior.
4. Organize the safety activities of the class, hold a pre-shift and post-shift safety meeting, conduct on-site safety education for newly transferred workers, and accept the guidance of full-time security officers.
5. Regularly check the safety construction situation in the operation area, solve the problems found in time, and take temporary control measures for the problems that cannot be solved and report them in time. Otherwise, necessary economic penalties should be given to major accidents and violations. (Which party is responsible for the accident caused by cross operation)
6. Strengthen the use and maintenance management of construction machines and tools, explain the operation methods and matters needing attention, operate according to the operation procedures, operate machines and tools with certificates, and check the usage frequently to prevent accidents.
7. Strengthen safety publicity and safety education, so that the safety technical disclosure rate of sub-items and processes in this team reaches 100%, and the safety education rate reaches 100%.
8. Personnel, equipment, fire, traffic and other accidents caused by failure to implement safety work shall be punished according to the company's safety production reward and punishment system.
Person in charge:
Date:
Responsibility Letter of Security Team 2 Party A:
Party B:
The team leader is the first person responsible for the safety management of the production site and is responsible for the safety work of the team. In order to enhance the safety awareness of the first responsible person, embody the safety responsibility, ensure safety in production, put an end to production safety accidents, ensure the personal safety and property safety of employees, and embody the principle of the unity of responsibility, right and benefit in safety work, the post leader of the production workshop and the team members sign the safety production agreement in the work area under their jurisdiction:
1, strictly implement various safety production management systems and operating procedures.
2, strict post inspection tour, to ensure the normal operation of the equipment and in good condition. The potential safety hazards and nonconformities detected by self-inspection and superior inspection shall be rectified within a time limit as required.
3, adhere to the safety team activities, often to the workshop staff safety knowledge, safety production plan, factory safety rules and regulations, exercises and other aspects of education and technical training, and assessment.
4, in the process of directing production, when there is a contradiction between production and safety, production should obey the safety, found that endanger the personal safety and equipment safety of major hidden dangers or emergencies, immediately issued instructions to stop production and processing, at the same time report to the leadership and notify the relevant functional departments.
5. Actively discover and eliminate potential safety hazards in the production process, and improve employees' safety awareness.
6. The casualty rate this year is 0%; No equipment, fire or production accidents with direct economic losses of more than 20,000 yuan (including 20,000 yuan) occurred throughout the year; Carry out safety qualified team activities, and the safety qualified team reached the standard at the end of 65438+February.
7, familiar with and master the dangerous substances and their properties, emergency measures.
8, team leader has the right to refuse illegal command.
9. The workshop rewards and punishments the team in strict accordance with the company's reward and punishment system.
Party A:
Party B:
Date:
Responsibility Letter of Safety Team 3 In order to ensure the smooth production of workshops and safety teams, and safeguard the personal safety of employees and the property safety of enterprises, this responsibility letter is formulated in accordance with the Factory's Standardization Manual on Safety Production and relevant safety production rules and regulations.
1, enterprise safety production adheres to the policy of "safety first, prevention first, full participation and comprehensive management", and adheres to the principle that production and operation obey safety needs to ensure the realization of safe production and civilized production;
2, the team under the leadership of the workshop director to carry out safety work, each team leader is the first person in charge of security team production, responsible for security team production management and safety education, organize the implementation of security team production responsibility system, implement enterprise safety production management system and procedures, to ensure the smooth development of safety production work;
3. Workshop leaders plan, arrange, check, summarize and evaluate the production tasks and safety work of the team at the same time;
4, the team to carry out safety activities, through the team meeting, publicity column and other activities, make the team members familiar with the safety management system of our factory, master the safety operation procedures, clear the rights and obligations of workers in production safety, improve safety awareness, master the emergency treatment methods of accidents;
5, the team regularly carry out safety inspection, timely find and control the hidden dangers of production safety, and report to the workshop leaders.
6. Put an end to the "three violations" phenomenon that members of this team violate the command rules, operating rules and labor discipline. Special equipment and special types of work need to hold relevant certificates;
7. Grasp the risk factors and occupational hazards of the safety team, and urge the team members to use labor protection articles correctly to prevent occupational hazards at work;
8. Carry out safety mutual check between teams and groups, and make a good connection between production and safety. The team leader shall disclose safety matters to the team members;
9. In case of personal and equipment accidents, immediately report to the person in charge of the workshop and the factory level, and handle the accidents under the leadership of the factory and the workshop according to the principle of "four don't let go";
10, the responsibility letter will take effect after being signed, valid for one year, and will be assessed at the end of each year. The assessment is based on the Rewards and Punishment System for Enterprise Safety Production, the Measures for Staff Performance Assessment of xx Electric Power Equipment Repair Factory and the Workshop Assessment Management System.
1 1. In case of the change of the person in charge, the handover work should be done in time and the employment should be renewed, and the assessment node is the handover time;
12, this responsibility is in duplicate, one for the workshop and one for the team.
Person in charge:
Date:
4 Responsibility Letter of Party A's Safety Team:
Party B:
In order to strengthen safety management and protect the personal safety of operators and other personnel; At the same time, in view of the safety situation of the construction site at this stage, this responsibility letter is specially signed with the team:
1. Strictly implement the rules and regulations of the construction unit, general contractor and labor service company. In case of violation, the contract shall prevail.
Two, if there is illegal command, illegal operation, violation of labor discipline, should be fined according to the following standards:
1. Whoever fails to wear safety helmet to enter the construction site as required will be fined XX yuan each time.
2, limb, the mouth of the cave, high homework don't wear a seat belt, high homework don't set up the operating platform as required, forced to stand outside the frame to fuck the author; A fine of XX yuan/person/time.
3. When working near the limb and the mouth of the cave, materials cannot be stacked within a safe distance (within 1 m from the edge), and building materials and tools cannot be stacked on an outer frame. Offenders will be fined XX yuan each time.
4. When dismantling templates and supporting systems, it is forbidden to dismantle templates after dismantling all supporting systems, which may cause safety accidents; When dismantling the formwork near the edge, you must first set up a safety protection layer to avoid material falling and hurting people. Offenders will be fined XX yuan.
5, homework, it is forbidden to throw things up and down, if there is a fine of XX yuan each time.
6. The hoisting materials are not bundled and shipped as required (for example, the steel bars with the length of 1 m are not packed in buckets, and the cushion blocks are not packed in buckets). If XX yuan/person/time is found.
7. In the process of using, stacking and hoisting explosive materials, those who do not meet the requirements will be fined XX yuan/time.
8. If the rectification measures proposed by the management refuse to be rectified within the specified time, it will be fined XX yuan/time.
9. Gathering people to fight at the construction site, causing trouble and disobeying the company commander, a fine of XX yuan/time will be imposed.
10, illegal operation in the process of operation, resulting in falling objects from high altitude, each time fined XX yuan.
1 1. Dismantle the power cord without permission, and operate the mechanical equipment without the consent of the team leader, and be fined XX yuan/time.
12, the mechanical equipment has not been used for more than 2 hours and the power supply has not been cut off after work, and it will be fined XX yuan/time.
13. It is forbidden to dismantle, move or destroy limb, hole, outer frame and site safety protection facilities, and a fine of XX yuan is imposed.
14, damage, daub site safety warning signs, a fine of XX yuan.
15. If a safety accident is caused by illegal command, illegal operation or violation of labor discipline, the team shall be fined according to the proportion agreed in the contract.
The above letter of responsibility shall be signed and approved by the team contractor and the person in charge of the team yard. If any safety accident is caused by violation of regulations, it will be handed over to the judicial organs for handling.
Person in charge of Party A:
Person in charge of Party B:
Date:
Security Team Responsibility Letter 5 Party A:
Party B:
In order to conscientiously implement the policy of "safety first, prevention first", and in accordance with the principle of "safety must be controlled in production", strictly abide by the Construction Law, the Law on Safety in Production and the relevant national laws and regulations on safety in production, earnestly do a good job in safety supervision and management at the construction site, improve safety protection facilities, strictly implement the safety technical operation procedures of various types of work, control and avoid the occurrence of major casualties in construction operations, and ensure the smooth progress of safety in production.
A, the team is responsible for the scope of the construction content:
Two-story concrete engineering
Second, the construction period from the commencement date to the completion acceptance date.
Three. Scope of responsibility of Party A:
1, strictly abide by the Basic Provisions on Safety in Production for Construction Management (Logistics) Personnel of Building Installation.
2, the project manager is the first person responsible for the unit project safety production, should be fully responsible for safety work, implement the principles and policies of safety production, adhere to the principle of production must be safe, lead by example, not illegal command, support the work of safety officers at all levels.
3. Implement technical measures for production safety, and strengthen the investment and application of protective articles and protective facilities for production safety. Handle personal injury insurance for employees in construction accidents according to regulations.
4. Supervise the use of labor protection articles.
5. Be responsible for the safety education and training of all employees (including laborers) in the project department, and deliver the training.
6, regular safety production meeting, do a good job in safety production activities.
7, regularly (in principle, not less than once every ten days) to organize safety inspection, correct illegal operations, implement corrective measures, eliminate hidden dangers of accidents.
8, pays special attention to the construction site safety and civilized construction, establish fire prevention and security system.
9, the scene accident should immediately rescue the wounded, protect the scene, strictly implement the accident reporting system and treatment methods.
10, actively carry out safety activities to create civilized construction sites and meet standards.
1 1, organize the assessment of the responsibility system for production safety.
12, environmental protection and nuisance prevention measures should be implemented in the construction.
Four. Scope of responsibility of Party B:
1, strictly abide by the Basic Provisions on Safety Production of Construction and Installation Workers and the Operating Rules for Construction Technology of Construction and Installation Engineering in Jiangsu Province.
2, conscientiously implement the safety operation procedures and related safety production system, according to the technical, physical, ideological and other conditions of the staff of this class reasonable arrangement of work, do a good job of safety disclosure for each operator, do a good job of safety record account, and be responsible for the safety and health of the staff of this class in production.
3. Do a good job in safety production activity day, hold a pre-shift and post-shift safety production meeting, support the work of safety officers, conduct on-site safety education for newly transferred workers, and do not operate until they are familiar with the working environment to ensure the personal safety of new employees. Set an example and don't command in violation of regulations.
4, the team to check the role of machines, equipment and protective equipment and working environment, under no circumstances shall violate the rules and regulations foolhardy.
5. When arranging construction tasks and organizing production, we should strictly implement the contents of construction and safety technical disclosure, do a good job and self-check, solve problems in time when they are found, take temporary measures if they cannot be solved, and report them in time.
6, have the right to refuse illegal instructions.
7. Organize our team members to learn all kinds of safety production rules and regulations, and take charge of all kinds of education and training for our team members.
8, inductrial injury accident should be timely rescue, protect the scene, and immediately report, after the accident treatment should organize the whole team personnel to analyze carefully, draw lessons from the accident, improve the protective measures.
9. Mobilize all the staff, put forward reasonable suggestions to promote safe production and improve working conditions, and make records and reports.
Party A:
Party B:
Date:
6 Responsibility Letter of Party A's Safety Team:
Party B:
In order to comprehensively strengthen construction safety management, improve safety awareness, establish a self-restraint mechanism for safety production, and ensure the safety and health of construction personnel, we have signed a responsibility letter for safety production with the shelf team, requiring the shelf team to strictly abide by the safety technical operation procedures. Party B shall consciously obey and accept Party A's safety technical guidance, supervision and management, and earnestly undertake the following specific responsibilities.
1, scaffolder must hold relevant certificates, and every worker who enters the site must go through safety technical disclosure, tertiary education, and sign a safety responsibility letter before taking up his post to participate in construction and production.
2, in strict accordance with the relevant provisions of the aerial work, do a good job of self-protection, wear a safety helmet, fasten your seat belt, it is forbidden to wear hard bottom, slippers, use tools to use a bag or rope tied to the body, must wear a standardized and qualified seat belt.
3. After the project department conducts safety technical disclosure on the construction site, the project department must operate in strict accordance with the design scheme and acceptance criteria of various external frames (floor frame, cantilever frame, full-house frame, hanging tripod, hanging basket frame and attached lifting frame).
4, all kinds of shelves in the process of erection and demolition should be under the guidance of on-site technical personnel, a clear division of labor, unified command, in accordance with the safety technical process of all kinds of shelves for construction work. Ensure the firmness and quality of all kinds of shelves, and ensure the safety of workers working high above the shelves. Do not jump blindly on the shelf platform. It is forbidden to throw all kinds of objects at high altitude, and two people should cooperate in supporting, dismantling and transporting all kinds of super-long materials to prevent falling objects from endangering the safety of others.
5. Actively cooperate with the daily safety inspection of the project department, timely rectify the potential safety hazards of all kinds of shelves, and ensure the construction safety in production.
6. Safety is always based on prevention. The responsibility of "safety is in the heart, quality is in hand" and "don't talk about safety, don't talk about work" has a long way to go.
The team leader and the workers in this team strictly perform the above-mentioned safety and civilized construction duties, put an end to safety accidents and improve the safety management level. In case of violation, hell to pay will be prosecuted, and those with serious circumstances will be transferred to judicial organs for handling. (Attached page)
Three. This responsibility book is made in duplicate, one for each party.
Party A:
Party B:
Date:
;