When the air conditioner is in standby mode, press the function key to select the cleaning mode. News? Key, the filter will turn to the front, and the filter can be removed by removing two screws (remember that the air conditioner must be in standby state and cannot be turned on, and the cleaning mode cannot be selected when it is turned on).
Dismantling the air filter: after cutting off the power supply, buckle the groove on the right side of the air conditioner on the back of the air conditioner, and pull out the upper and lower air filters in the direction of the arrow.
Remove the health filter: Remove the health filter from the air filter in the direction of arrow. Note: After cleaning, stick the blue mesh of the health filter on the air filter and install it.
Clean the filter screen: be sure to pat it gently or clean it with an electric vacuum cleaner. When the filter screen becomes dirty (if there is oil stain), it can be cleaned with warm water (below 50℃) dissolved with neutral detergent. It is recommended to wash it with a shower head and then put it in a cool place to dry. Note: Do not use hot water above 50℃ to avoid discoloration or deformation. Do not dry on an open flame to avoid fire or deformation of the filter.
Clean the health filter: clean the dust on the surface with a soft brush, and then blow it with a hair dryer for maintenance. Healthy filter elements have a certain service life, and the normal use conditions are generally about one year. The number of health filters depends on the actual distribution.
Install the air filter: put the air filter back in the direction opposite to that taken out.