What is the power of the water dispenser? How to use it correctly? What are the precautions?

Nowadays, drinking fountains are basically available in every family because the water quality of drinking fountains is relatively clean. At the same time, we don't need an electric kettle to boil water, we can drink cold water or hot water. Drinking fountains are convenient for everyone's life. Of course, one question that people will ask when buying a water dispenser is, how big is the power of the water dispenser, and will it consume a lot of electricity? In fact, the power of drinking fountains is relatively low, and not much electricity is used in daily life. At the same time, what are the precautions in the use of drinking fountains?

1. What is the power of the water dispenser?

The power consumption of bottled water drinking machine is closely related to the power and frequency of use. Generally, the heating power of drinking fountains is 800- 1000 W, and the heat preservation power is mostly tens of watts. If the heat preservation performance of the water dispenser is good, the power consumption of 24-hour all-day operation is about 4-5 degrees. If you get into the habit of turning on the power supply when you use it, the habit of turning off the power supply after use will greatly reduce the electricity consumption and save a lot of electricity bills.

Second, the correct drinking way of the water dispenser:

1. It is best to drink unpacked bottled water within 10 days.

2. Bottled water should not be placed in direct sunlight.

3. The cleaning of drinking fountains is an indispensable part to ensure the sanitary index of bottled water. It is generally recommended to clean and disinfect once every 0/-2 months.

4. Drink pure water and mineral water alternately.

Three. Matters needing attention in drinking fountains

1, bottled water should be drunk within 7 days after opening, preferably not more than 15 days, otherwise it will be degraded by secondary pollution.

2. Place the water dispenser in a cool, ventilated and dry place; Avoid direct sunlight and prevent algae growth (commonly known as moss). ? 3. The upper part of the drinking machine has an exhaust hole, which is in contact with the air and is easy to bring in bacteria, algae and dust, resulting in secondary pollution. Therefore, the water dispenser should be cleaned regularly, generally once a week in summer and once a month in winter;

4. Because the actual heating of the water dispenser can't reach 100 degrees, it is impossible to boil tap water, so please don't put the bottled tap water on the water dispenser to boil and drink.

5. Qualified barrels will not cause toxic pollution to the water quality in the service life, and the wear of the outer surface of the barrels will not lead to the change of the water quality in the barrels. ? 6. When drinking bottled water is suspended, the bucket should be returned to the water delivery shop within two months, so as to prevent the bucket from being polluted and difficult to clean, which will affect the recycling of the bucket.

In the above introduction, Bian Xiao introduced the power of the water dispenser in detail. We can know that if the heat preservation performance of the water dispenser is good, the power consumption when it is turned on 24 hours a day is about 4-5 degrees. Therefore, it is very energy-saving, and if you get into the habit of turning on the power supply when using it and turning off the power supply after using it, the power consumption will be greatly reduced. ? The water in the drinking fountain is pure water, which removes substances harmful to human body, but the drinking fountain should also be cleaned regularly.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~