1. Punch or fix the water purifier at the selected position. Holes should be smooth, accurate in depth and spacing, and there should be no cracks, gaps or burrs around the holes.
2. Connect the water pipe. First, close the main tap water valve,
Connect the water purifier, and wrap the interface with raw tape to avoid water leakage. 3. Connect the concentrated water discharge port. The water purifier can directly put the sewage pipe into the sewage pipe, and the port should leave a certain space to prevent the sewage from flowing back to the water purifier of the health home and prevent the siphon phenomenon of the sewage outlet; If the drain pipe of the water purifier is directly put into the drain pipe, a ball valve should be installed at the end of the drain pipe.
Unscheduled opening can play the role of sewage discharge; The sewage pipe can also be directly connected with the original tap water. The sewage pipe must be connected with the sewage outlet of the water purifier to avoid water leakage. 4. Connect the purified water outlet and the purified water faucet. If the flow rate is greater than 1000 liter, you can directly use 4 branches and general faucet; If the flow rate is less than 1000 liter, you can choose to use 4-to-2 connectors to connect with the purified water outlet.
Connect to the 2-minute faucet through a 2-minute white PE tube. When connecting the branch pipe 2, firstly flatten the nozzle, then put on the nut, then insert the plug into the pe pipe and tighten it, and then insert the pe pipe about 1CM beyond the nut and tighten it. 5. Install the faucet: If you want to install the faucet on the sink, the stainless steel sink can be opened with a hole opener. If you want to fix the faucet on the wall, you can fix the faucet on the wall with a right-angle faucet pendant. The joint connection method is the same as (4), and the fixed part should be tightened without shaking.
6. Open the main inlet ball valve, debug the water purifier (see Maintenance for debugging steps), and observe whether the joint leaks. The observation period is at least 2 hours. You can put a clean dry towel under the water purifier and check whether there is water seepage.
The installation method of water purifier is professional, and it is usually installed by specialized technicians. The installation quality of the water purifier also has a certain influence on the later use. The above is the related content of the installation method diagram of the water purifier.