Article 1 Commitment on Work Safety I promise:
1. Strictly abide by the safety production rules and regulations and operating procedures of this unit, and obey the management of this unit.
2. Consciously accept the education and training of safety production, and master the knowledge of safety production in this position.
3. Refuse "three violations", wear and use labor protection articles correctly, and do not harm yourself and others.
4. Improve safety production skills, understand the potential risks and hazards of the post, and enhance the ability of accident prevention, emergency treatment, escape and self-help.
5. Consciously put forward suggestions on the work safety of this unit, criticize, report and accuse the existing problems, and report the hidden dangers of accidents or other unsafe factors immediately.
Commitment: xx
20xx June xx
In order to ensure the safety of drivers and unit property, the following commitments are made:
First, the technical condition of the vehicle conforms to the national first-class vehicle standard, and the vehicle is in good condition to ensure safety.
Second, the driver's business knowledge, skills and professional ethics are good, and he has been trained and qualified to work with certificates (the driver has received the qualification certificate suitable for the vehicle), and he is healthy and competent for the job.
Three. This unit has formulated relevant management and safety production management systems and strictly implemented them.
Four, the vehicle belongs to the unit management, unified management, unified scheduling, unified settlement, not affiliated operation, not contracted operation.
Five, in strict accordance with the business scope approved by the transportation management agency.
Six, conscientiously implement the "production safety law", "road traffic safety law", "road transport regulations", "road passenger transport and passenger station management regulations", adhere to the policy of safety first, prevention first, implement the responsibility system for production safety, and clarify the responsibilities of each post. Conduct safety training and education for drivers on a regular basis, inspect and maintain vehicles on a regular basis, and conduct safety inspection on vehicles before leaving the vehicle to keep the vehicles in good technical condition. Vehicles are not overloaded, drivers are not fatigued, drivers are not drunk and drive illegally, and drivers in double shifts are more than 400 kilometers (600 kilometers on the expressway).
Seven, abide by the rules and regulations, operate according to law. All kinds of certificates and license plates for operating vehicles are complete and effective. Problems encountered in the operation process, etc. , are reflected by the unit step by step, there is no event that affects social stability.
Eight, consciously abide by the road transport industry management regulations, obey the management of transportation and tourism departments at all levels and transportation management institutions, and pay various fees on time.
If you violate the above contents and relevant regulations, you will be punished voluntarily according to the regulations.
Signature of Legal Representative of Commitment Party: XXX
(official seal of the company)
20xx year x month x day
Commitment letter for safe production Article 3 In order to ensure the safe production and construction of (project name) project, as the first person responsible for safe production of (enterprise name), I make the following commitments on the organization and implementation of safe production of this project:
1. Conscientiously implement the guidelines, policies, laws and regulations on production safety, establish and improve the responsibility system for production safety and management system and operating procedures of this enterprise, effectively strengthen the safety management of the project, and ensure that laws, regulations, standards and various systems and operating procedures of this company are seriously implemented in this project.
The second is to strengthen the construction and management of the project team. According to the project scale, construction technical difficulty and project management needs, a lean and efficient project management team is established, the safety management objectives and responsibilities of the project department are defined, and the supervision of the safety production performance of the project management team is strengthened to ensure the normal operation of the project safety assurance system and the solid and effective development of the project safety management work.
Third, establish a three-level safety education and training system, and supervise the implementation of safety education and training for project managers and operators of this enterprise.
Four, the establishment of enterprise technology management system, supervise enterprises to carefully examine and approve the implementation of the special construction plan, to ensure that the plan is feasible, safe and reliable, and strictly enforced.
Five, the establishment of enterprise equipment management system, urge enterprises to implement strict management of all kinds of equipment and facilities of the project, to ensure the safety of installation and use.
6. Establish enterprise safety inspection system, supervise the implementation of regular safety inspection and special inspection of projects carried out by enterprises, strictly implement the provisions of regular handover inspection of enterprise leaders, and the company shall inspect projects no less than 1 time every quarter, and supervise the rectification of problems and hidden dangers found in company inspections.
Seven, the establishment of enterprise subcontracting construction team management system, supervision of enterprises to subcontract team safety management in place.
Eight, establish the project safety investment guarantee system, supervise and implement the rational use of project safety expenses, and ensure the project safety investment.
Nine, the establishment of enterprise safety and civilized construction standards and major hazard source registration account of engineering projects, supervise and urge the implementation of major hazard source tracking monitoring and enterprise standards to be effectively implemented in the project to curb the occurrence of production safety accidents.
Ten, strengthen the project safety performance appraisal rewards and punishments, such as project safety management, timely rectification and adjustment of project department personnel.
Eleven, organize the preparation of accident emergency plan, establish emergency organization, make emergency preparations, once the project accident, immediately report to the higher authorities and relevant departments, do a good job in accident rescue, on-site protection and aftermath, minimize the loss and impact of the accident, and seriously deal with the relevant responsible personnel.
The above commitments are guaranteed to be fully fulfilled, and if they are not fulfilled, they are willing to accept the treatment.
The above undertaking is made in triplicate, one of which is kept by myself and executed by analogy; The other two copies shall be submitted to the construction unit and the construction safety supervision institution respectively to supervise this commitment.
Commitment (signature):
Unit (seal):
date month year
As an employee, I solemnly promise to strictly perform the following duties and obligations in my work to protect my health, life and property safety and prevent and reduce production safety accidents:
1, conscientiously implement the safety production policy of "safety first, prevention first and comprehensive treatment" and abide by various safety production systems and regulations.
2. Strictly implement the system of "unpacking inspection" and "inspection and sealing", in strict accordance with "who operates, who is responsible; Who manages, who is responsible "principle, strengthen the supervision mechanism, and investigate the economic responsibility of the responsible person or party for violations or even violations, until criminal responsibility is investigated. At the same time, cooperate with the industry authorities to do a good job in the real-name registration system of express delivery, and truly build a double firewall for safe production;
3. Dress for work according to regulations, wear labor protection articles, do not smoke in non-smoking places, and strictly abide by relevant regulations on fire prevention, explosion prevention and vehicle safety.
4. Abide by the laws, regulations, rules and regulations of fire control management, actively learn the knowledge of fire fighting and fire escape, and be familiar with the use methods and escape routes of various fire fighting equipment. Take the initiative to accept safety education, training and assessment, be familiar with the safety operation procedures of this post, master the safety skills of this post, understand the dangers, preventive measures and emergency methods of this post, hold relevant certificates, give an alarm, save themselves and each other, and skillfully use gas masks and respirators.
5. Actively participate in the inspection and rectification of hidden dangers of accidents. If hidden dangers of accidents or other dangerous (harmful) factors are found in the work, they should immediately report to the leaders to solve them, actively participate in the emergency rescue work of their own units, and obey the command of their superiors in the rescue.
6. Be loyal to their duties, strictly fulfill the responsibility for production safety, implement "one post and one responsibility", and be responsible for the safety of enterprises, departments, employees and themselves.
7. Abide by the laws, regulations, rules and regulations of safety management, do not drive fatigue, do not drink and drive, and do not lend vehicles to people without driver's licenses. Driving a motor vehicle must hold a valid driver's license, do not exceed the speed limit, abide by traffic laws and regulations, and wear a safety helmet correctly when riding an electric vehicle or motorcycle.
8. Strictly implement the relevant management regulations on cash and bills to ensure that no safety accidents such as loss, theft or robbery occur.
9. Actively guide customers to fill in the express delivery details list according to the standard, strengthen the study of the contents of the contraband list, carry the leaflet of the contraband list with them, and take the initiative to show it to the sender when receiving the express mail, so as to publicize the contraband knowledge in place.
10. Actively participate in various safety trainings, safety studies, safety activities, accident emergency drills and safety culture construction organized by the company, and strive to create a harmonious safety production atmosphere and cultivate good work habits and safety values.
This letter of commitment is made in duplicate, one for the company's file and one for the promisor's retention.
Signature of the promisor:
Person in charge of this unit:
Article 5 The people's government promises to work safely:
As the legal representative (actual controller) of xx (company name) and the first person in charge of production safety, I am fully responsible for the company's production safety work. According to the requirements of "Work Plan for Deepening the Legal Representative's Work Safety Commitment System in Hebei Province" and the provisions of relevant laws and regulations, in order to do a good job in production safety and effectively prevent and contain accidents, I hereby solemnly promise as follows:
First, establish and improve the "three systems" of safety production (safety production responsibility system, safety production rules and regulations, safety operation procedures), and strictly implement them.
Two, the establishment of production safety management institutions in accordance with the law, equipped with production safety management personnel, and ensure that they fully perform their duties, so that the management of production safety is scientific, standardized and standardized.
Third, according to the "three-level" safety education of employees, organize special operations personnel to participate in professional training, ensure that special operations personnel hold certificates, ensure safe production and civilized production, and put an end to "three violations". Focus on strengthening the publicity and education of drivers' traffic laws and regulations, constantly reducing traffic violations and putting an end to unsafe driving habits.
Four, engaged in production and business activities according to law. Storage places should be equipped with corresponding safety protection facilities, maintain transportation equipment and safety facilities, and strictly carry out safety inspections during loading, unloading and transportation. It is strictly forbidden to illegally load and unload transportation, and focus on the maintenance and repair of freight vehicles and other transportation equipment, and implement the monthly vehicle inspection system to ensure that the operating transportation equipment meets the safety technical conditions, and the intact rate reaches 100%.
Five, improve the basic management level of enterprise safety production. Actively promote safety standardization management, gradually establish a self-restraint, self-improvement and continuous improvement of enterprise safety production working mechanism, and continuously improve the overall safety level of enterprises.
Six, to ensure the necessary capital investment in production safety.
Seven, to ensure that new construction, renovation and expansion projects in accordance with the law to implement the "three simultaneous" system of safety facilities, to ensure that safety facilities meet the relevant provisions and requirements of the state.
Eight, seriously carry out daily enterprise safety inspection and hidden danger investigation activities, timely discover and rectify hidden dangers of accidents, and formulate and implement safety precautions during the rectification of hidden dangers of accidents.
Nine, the implementation of major hazard management, monitoring responsibility, effective monitoring and monitoring of major hazard sources.
Ten, according to the law to develop emergency rescue plan, equipped with necessary rescue facilities and equipment, and regular drills, the implementation of post emergency measures.
Eleven, according to the requirements of reporting production safety accidents, not late, false, concealed, omitted accidents, do a good job in accident rescue, actively cooperate with accident investigation and handling, properly handle casualties, compensation according to law and other accident aftermath.
Twelve, unified coordination and management of contractors and tenants' work safety, and sign safety agreements with relevant units.
Thirteen, truthfully inform employees of the workplace and workplace hazards, harmful factors, preventive measures and emergency measures, set up warning signs as required, and do a good job in the supervision and management of occupational health in the workplace.
14. Respect employees' due rights and interests in production safety, guide employees to fulfill their obligations in production safety, encourage employees to put forward suggestions to correct violations of laws and regulations in production safety, even criticize and report, and do not retaliate against employees who criticize and report, terminate labor contracts or reduce wages.
Fifteen, to provide employees with labor protection articles in line with national standards or industry standards, and supervise and educate employees to wear and use them correctly.
Sixteen, according to the law to participate in social insurance for work-related injuries, pay insurance premiums for employees.
Seventeen, to perform other duties of production safety as prescribed by laws and regulations.
During the commitment period, those who violate the above commitments and are severely punished according to relevant laws and regulations, resulting in production safety accidents, shall be punished according to the following provisions:
1. Legal representative (actual controller)
(1) A fine of 30% of the previous year's income shall be imposed for general accidents;
(2) major accidents accept a fine of 40% of the previous year's income;
(3) major accidents accept a fine of 60% of the previous year's income;
(4) For particularly serious accidents, a fine of 80% of the previous year's income will be accepted;
(five) the occurrence of major and above accidents, given life shall not hold the main leadership positions of enterprises in this industry;
(6) At the same time, accept the corresponding disciplinary action.
2. Enterprise.
(1) A fine of 65438+ 10,000 yuan but not more than 200,000 yuan is accepted for general accidents;
(two) to accept a fine of 200 thousand yuan and 500 thousand yuan for a major accident;
(3) Accepting a fine of not less than 500,000 yuan but not more than 2 million yuan for a major accident;
(4) Accept a fine of more than 2 million yuan and less than 5 million yuan for a particularly serious accident;
(five) at the same time accept the punishment of withholding or revoking the relevant licenses made by the relevant departments.
3. If there are serious acts such as not reporting according to law or obstructing or refusing accident investigation, the unit will accept a penalty of 6,543,800 yuan but not more than 5 million yuan. The legal representative (actual controller) accepts a fine of 60% to 100% of the income of the previous year; Those who belong to national staff shall be subject to corresponding disciplinary action.
Commitment period: 20xx 65438+ 10/-20xx65438+1 0/.
Commitment unit (seal): Signature of legal representative:
Signature of actual controller:
Xx, xx, 2000
In order to fully implement the "one post with two responsibilities" and the responsibility system for production safety, further strengthen our company's leadership over production safety, and implement the production safety objectives set by the superior safety management department and the head office, under the guidance of the policy of "safety first, prevention first and comprehensive management", I solemnly promise to strictly abide by the rules and regulations of this post and effectively prevent and contain accidents as follows:
First, the overall goal of the company's production safety accident control
1, personal injury accident control target: no serious injury or above accidents, and zero deaths.
2. Accident control objective: No production safety accident with direct economic loss of more than 50,000 yuan will occur.
Second, the goal of responsibility for production safety
1. Lead the functional departments of mine safety management to carry out safety production management. Personally serve as the first leader of the company's safety production management organization.
2, conscientiously implement the "production safety law", "mine safety law" and other laws and regulations and mine safety policies; Adhere to the safety production policy of "safety first, prevention first and comprehensive management".
3, organize relevant departments to prepare the annual overall planning of mine safety production, including the overall planning of mine production capacity, mine production facilities, environmental protection, labor safety and employee safety.
4, the preparation of mine annual safety facilities, safety equipment, safety management fee investment plan, and put it into practice.
5, examination and approval of mine safety production related rules and regulations, operating procedures, and urge the relevant departments to control execution.
6. In case of an accident, it shall immediately report truthfully to the competent department of labor and the competent department of enterprise. And organize personnel to carry out emergency rescue and disaster relief, actively cooperate with relevant departments to carry out accident investigation and analysis, and handle all kinds of industrial accidents in accordance with the principle of "four don't let go".
7. Reward those who have made outstanding contributions to mine safety work, punish those who fail to implement safety management, and assess the safety work of relevant functional departments with responsibility system.
8. Organize to participate in the company-wide safety inspection at least twice a month, carefully organize the safety inspection summary meeting, timely issue rectification instructions for the safety hazards found in the inspection, and supervise and inspect the implementation of the rectification. Production units that are unfavorable to rectification must be dealt with seriously and stop production for rectification when necessary.
9, seriously organize relevant personnel to prepare the annual safety technical measures plan, and seriously organize the construction; Construction plans and drawings must be made for each construction, and production units are strictly required to carry out construction according to regulations, and projects without design will not be approved.
10, according to the company's specific division of labor, layers of implementation pays special attention to the work of production safety within the jurisdiction, in terms of production safety management, the company implements the accountability system, and whoever is in charge is responsible.
1 1. The general manager's performance in safety production management shall be assessed by the board of directors at the end of the year, and rewards and punishments shall be implemented according to the company's relevant safety management reward and punishment system.
Chairman of xxx Company (signature):
General manager xxx (signature):
201August 3 15
In order to strengthen the company's safety production management, effectively control all kinds of accidents, and reduce casualties and property losses, the company's safety production management objectives are achieved in line with the safety management policy of "caring for employees' health". In order to make employees abide by rules and regulations, standardize operations and achieve the purpose of everyone participating in safety, this commitment letter is specially signed.
A, production safety management objectives
1, the company's "six no controls" safety management objectives.
(1), no major fire accident.
(2), no major accidents.
(3) No major equipment accidents;
(4) Traffic accidents that are not the main responsibility of Party A.
(5) Cases of theft and fraud without major responsibility.
(6) There is no act of concealing or lying about the accident.
(7), inductrial injury accident rate control within 2‰.
2. The rectification rate of potential safety hazards reaches 100%.
3, complete the "safety production standardization" level 2 standard work.
3, basically establish a safety culture system.
Second, the employee commitment
1. Before taking up the post, consciously accept the three-level safety education, safety production discipline education, safety management system education, post "Safety Production Operating Rules" and various safety responsibilities, public security management regulations and various rules and regulations of new employees.
2. Keep in mind the safety production policy of "safety first, prevention first", consciously perform the safety responsibilities of this post, and insist on safety first when there is a contradiction between production and safety, so as to achieve: people-oriented, safety first, and resolutely do it? Does the speech step on production?
3. Consciously abide by national and local laws and regulations, and consciously abide by the company's management system and regulations on safety production. Do not violate the safety operation rules, and use personal labor protection articles and safety protection appliances correctly.
4. Enhance self-protection awareness: at work, do "I don't hurt others, I don't get hurt by others, I don't hurt myself", and don't engage in activities unrelated to work during working hours.
5. Consciously abide by the laws, regulations, rules and regulations of fire control management, and actively study fire fighting and fire fighting.
Field escape knowledge, familiar with the use of various fire fighting equipment and escape routes, familiar with the emergency measures of various accidents in this position, handle abnormal situations in time, and do not delay the opportunity.
6. Do not command or operate illegally or violate labor discipline in daily work; In order to achieve the enterprise safety goal, ensure zero mistakes in operation, zero mistakes in operation, zero accidents in safety and no "three violations" around.
8. Take the initiative to stop the unsafe behavior of colleagues, and immediately report to the on-site safety production management personnel or the person in charge of the work area when discovering hidden dangers of accidents or other unsafe factors, and the personnel who receive the report shall handle them in time.
9. Actively participate in all kinds of safety training, safety learning, safety activities and accident emergency drills, master the knowledge of safety production required for operation, and enhance the ability of accident prevention and emergency handling.
Consciously abide by the above commitments, and take responsibility for any violation.
This letter of commitment shall come into effect as of the date of signing.
Organizer (signature): YY.
Head of department (signature): MM DD YY.
Chapter VIII Commitment to Safety in Production According to the Law of People's Republic of China (PRC) on Safety in Production, Provisions of the State Council on the Investigation of Administrative Responsibility for Extraordinary Safety Accidents, Regulations of the People's Republic of China on Road Transportation, Regulations of the Ministry of Transport on Road Freight Transportation and Station Management, Regulations on Road Dangerous Goods Transportation and Regulations of Shandong Province, etc., in order to further strengthen road freight transportation,
First, strengthen the organization and leadership of enterprise safety production.
1. Seriously implement the national laws, regulations and rules on production safety, adhere to the policy of "safety first", regard production safety as the top priority of enterprises, and strengthen the organization and leadership of production safety. The legal representative (principal responsible person) of the enterprise is the first responsible person for production safety, and is fully responsible for the production safety of the enterprise; The leader in charge of safety is responsible for the task; Other members of the leading group implement "one post and two responsibilities" according to the division of labor.
2. Put safety in production on the important agenda of enterprise leaders, insist on holding a regular meeting on safety in production every quarter, a safety analysis meeting every six months, and an annual safety summary meeting every year to ensure the "four implementations" of time, personnel, content and effect, and complete meeting records.
3. All departments and production (operation) posts of the enterprise have clear responsibilities for production safety, sound systems, inspections, assessments and records.
Second, the enterprise safety management institutions are sound.
Enterprises set up full-time (part-time) safety management institutions, and the fleet (workshop) has full-time (part-time) safety management (supervision) personnel.
Third, the enterprise safety production system is perfect.
The safety production system mainly includes: safety production operation rules, safety production (management) post responsibility system, safety production supervision and inspection system, technical management system of road transport vehicles, safety management system of employees, safety regular meeting system, safety learning education and training system, and accident emergency plan.
Four, strengthen the safety management of road freight transport vehicles
1. The safety technical performance of road freight transport vehicles meets the national standards. In accordance with the relevant provisions of the state, carry out regular maintenance of vehicles to ensure that vehicles are in good technical condition.
2. The vehicle structure shall meet the requirements for the packaging of the transported goods to prevent the goods from falling off, scattering and losing.
3. It is forbidden to use scrapped, unauthorized modification, assembly, unqualified vehicles and other vehicles that do not meet the requirements of the state to engage in road cargo transportation business.
Five, strengthen the qualification management and safety education of employees.
1, the road freight transport driver holds the road transport qualification certificate, and insists on pre-job professional training, and takes up the post after passing the examination;
2. Adhere to the regular training of employees on safety, professional ethics, business knowledge and operating procedures, and implement the safety learning education and training system for employees.
Six, the establishment of accident accountability system
1. According to the principle of "four no-misses", carefully identify the cause of the accident, draw lessons from the accident, formulate rectification measures, and investigate the responsibilities of relevant personnel according to relevant regulations;
2, adhere to the responsibility accident investigation system. In the event of a liability accident, it is necessary not only to find out the responsibilities of the relevant personnel, but also to carefully find out the management reasons and investigate the responsibilities of the relevant leaders.
3, adhere to the accident reporting system. The accidents that have occurred should be reported to the relevant departments in a timely manner, and records such as enterprise quality and credit assessment and driver integrity assessment should be carefully made.
Enterprises firmly establish a sense of safety in production and earnestly abide by the above-mentioned responsibility objectives. If the responsibility target is not implemented, I am willing to accept the corresponding punishment according to the provisions of relevant national laws, regulations and rules.
This undertaking is made in duplicate, one for the enterprise and one for the road transport management department. Due to the personnel changes in this enterprise, it will not affect the continued performance of this enterprise. The provisions of the state have changed, and the terms of this letter of commitment have been revised and re-signed.
Commitment: xxx
For the sake of personal safety and health, for the stable development of the enterprise, strictly abide by the relevant systems, and in line with the principle of putting prevention first and safety first, we make the following commitments to ensure safe production, come to work happily and go home happily.
First, we must strictly abide by relevant national laws and regulations. Before work, you must check whether all kinds of protective equipment, tools and instruments are good and reliable. Before operating the circuit, we must check the electricity with an electronic probe.
Second, we must understand and master the structure, performance, safety operation procedures and other related safety systems of our electrical equipment, and strictly implement them.
3. Be responsible for managing the quantity, dynamics and status of electrical equipment and lines within the specified range: obey the leadership of the group leader (monitor) and the command of the audience management personnel, complete the maintenance and installation tasks of electrical equipment and lines within the specified range in time, and be on call.
Four, according to the plan and arrangement, maintenance and installation work on time, tools, materials and spare parts must be prepared before work. When working, you must strictly abide by the operating rules and the system of stopping power transmission to ensure safe operation. Do a good job in debugging and acceptance of maintenance or installation equipment.
Five, strict labor discipline, make full use of working hours, shall not be absent without leave during work, do not do private or work-related things.
Six, electrician on duty must stick to their posts, strictly abide by the system of succession, and make a good record of succession.
Seven, strictly implement the relevant rules and regulations, it is strictly prohibited to live work, work after power failure.
To hang a power outage sign, the initial lock should be locked and the power generation work should be done well.
Eight, when climbing a ladder, should first check whether the ladder is safe and reliable, placed at an appropriate angle, pay attention to non-slip.
Nine, aerial work, it is forbidden to throw things, seat belts should be tied to the poles and fixed parts.
Ten, in case of a thunderstorm, windy weather, it is strictly prohibited to work on high-altitude lines. This letter of commitment is made in duplicate, one for filing and the other for keeping by the promisor.
Commitment: Department to which the post belongs: Department Head (signature):
date month year