Brief introduction of pedometer and its function;
1. Electronic pedometer is mainly composed of vibration sensor and electronic counter. People should move their center of gravity up and down when they walk. The up-and-down displacement of the waist is the most obvious, so it is most appropriate to hang the pedometer on the belt.
2. The core of electronic pedometer is vibration sensor, which can be divided into 2D pedometer and 3D pedometer according to the form of sensor. According to the function, it can be divided into single-function pedometer, pedometer watch, fat pedometer and so on.
3. Pedometer is a tool to measure calories or calorie consumption by calculating steps, distance, speed, time and other data, so as to control the amount of exercise and prevent insufficient or excessive exercise.
4. According to the function, it can be divided into single-function pedometer, pedometer watch, fat pedometer and so on.
5. Working conditions: Most pedometers can work normally under the following conditions: temperature:-10℃~40℃, relative humidity: 30%~85%, atmospheric pressure: 86KPA~ 106KPA.
Mate7 is equipped with a 6-inch 1080p screen, which is larger than Note4. At the same time, it adopts all-metal body and fingerprint unlocking and payment functions. Huawei's own super 8-core HiSilicon Kirin 925 chip was installed on this model for the first time. Mate7 uses a 4 100mAh battery. [ 1]? As the third generation product of Mate series, Huawei Mate7 still uses a 6-inch cross-border screen size, but adopts an ultra-narrow bezel design, and the body is thinner, only 7.9 mm, which is a great improvement compared with the previous generation. At the same time, in terms of technology, the integrated fuselage design and aviation aluminum are adopted, which will undoubtedly greatly enhance the grip.
Huawei Mate7 uses HiSilicon Kirin 925 processor.
It uses a more powerful HiSilicon Kirin 925 processor-four 1.8GHzA 15 chips+four 1.3GHz A7 chips, Mali-T628 GPU and i3 coprocessor. On the network side, the device supports dual card dual standby. Like P7, one of the card slots can hold a memory card or a Nano? SIM card, and both card slots support 4G network. In terms of bandwidth, it supports ultra-high-speed LTE Cat 6 technology.
Mate7 camera and battery
In terms of camera, the equipment is equipped with13 megapixel Sony fourth-generation BSI sensor, F2.0 large aperture and 28mm wide angle. The battery capacity of this device is slightly higher than that of the previous generation Mate 2, which is 4 100 mAh, and the battery is non-detachable. At the same time support NFC technology.
Huawei Mate7 introduces fingerprint scanning.
It is worth mentioning that Huawei also introduced the fingerprint scanning function to mobile phones for the first time. It is said that the fingerprint scanning function is very sensitive, which can support the use of fingers at a 360-degree angle and support up to 5 fingers to enter. The fingerprint sensor is designed on the back of the fuselage. When the black screen of the mobile phone is unlocked, you can enter the desktop with a light touch (the fingerprint reader cannot press it). When in use, you can also use the virtual buttons on the screen to operate, reducing the pressure on the fingerprint sensor.
In addition, Huawei saves data in a chipset called SecureOS, so there is no need to worry about privacy. Fingerprints can also touch the shutter, and you can take photos in the fingerprint recognition area without clicking the shutter on the screen.
Huawei Mate7[4]? The front of the high version adopts a 6-inch LTPS capacitive touch screen with a resolution of 1920X 1080 pixels, and the display effect is very delicate. The back of the fuselage is also equipped with a13 megapixel Sony stacked lens, F2.0 large aperture, and the corresponding 5 megapixel super wide-angle front lens. In addition, at the core, the machine has a brand-new Hess Kirin 925 eight nuclear processor, which has a large. A little architecture, supplemented by an "i3" micro intelligent core coprocessor and a memory combination of 3gb RAM and 32gb ROM, can smoothly run EMUI 3.0 based on Android version.
Huawei Mate7 Standard Edition uses a 6-inch LTPS capacitive touch screen on the front with a resolution of FHD of 1920X 1080 pixels, and the display effect is very delicate. In addition, at the core, the machine has a brand-new HiSilicon Kirin K925 super eight nuclear processor and big. With a little architecture, supplemented by an "i3" micro intelligent core coprocessor and a memory combination of 2GB RAM+ 16GB ROM, EMUI 3.0 based on Android version can run smoothly. The back of the fuselage is also equipped with a13 megapixel Sony stacked lens, F2.0 large aperture, and the corresponding 5 megapixel super wide-angle front lens.