Next, let's take a look at how to repair the motor of the treadmill if it is broken.
First, determine the reason for the failure. There are many reasons for motor failure, such as power failure, poor plug contact, capacitor damage, relay failure, loose connection wire and so on. Therefore, it is necessary to judge the cause of the failure before maintenance, and then stop the operation to avoid accidents caused by improper use.
Step 2, check the quality of the motor. Check whether the winding of the motor is loose, whether there are obvious traces and damaged parts, and whether the capacitor is overheated. If there is any problem, it must be repaired or replaced immediately. If the motor works normally, but the treadmill makes abnormal noise during operation, it is necessary to check whether the belt and gear are damaged and need to be replaced.
The third step is to repair or replace the damaged parts. Damaged parts must be repaired or replaced. If it is a capacitor problem, you need to buy the corresponding specifications and models of capacitors and replace them manually. After replacement, the capacitor must be reinstalled and the correct installation position must be ensured. If it is a problem of line connection, it is necessary to check the tightness of the connecting ring, clean the contact surface and ensure normal contact. If there are replacement parts, pay attention to whether they meet the standards of the original equipment and install them in the order required by the manufacturer.
In short, the motor problem of the treadmill needs to be repaired as soon as possible, and the damaged parts should be replaced in time, so as not to increase the maintenance cost and affect people's healthy exercise. When operating, be sure to pay attention to safety and avoid personal injury. If you don't know the maintenance process, it is recommended to ask experienced professionals to carry out maintenance to ensure the maintenance quality.