1, dig a pit with a depth of 3 compartments on the outside of the wall where the hidden bed is located, for placing the circuit.
2. Put two push-pull robot arms under the wall, with the push-pull direction of the arms facing upwards, and put two power boosters at the very bottom of the pit, leaning underneath the push-pull robot arms. Adjust the power level of the power boosters by clicking on the power boosters.
3, and then with the power line will be connected to the power amplifier, in the opposite direction of the power amplifier to put the power generator with a grass block to cover up our circuit, revealing the power generator and the two blocks behind it.
4. Place a sliding cube on the ground with the plus pattern side facing the direction where you want to place the minus marker.
5. Place the power amplifier on the back of the sliding cube and turn the amplifier down by 2 levels. Place the minus marker and the plus marker, then the stone behind it, and then a bed next to the stone and the minus marker.
6. In the dugout that is not filled with grass blocks, place an electrical energy wire to connect the power increaser and power generator to the wall, and place a switch inside the wall of the house at the location of the wall electrical energy wire. When you enter the house, click the switch to energize it, and the crib under the wall will be pushed out. Hit the switch off when not in use and the invisible bed that no one will notice is complete.
King's Heart 2 click to try