1, pre-check
We open the product package, take out the cassette stove base and support frame, butane gas cylinder. We check that the cassette stove has not been deformed, loose and other problems, and whether its paint film has been destroyed. You also need to check whether the cap of the gas cylinder has been sealed properly and so on. If there is a quality problem with the cassette cooker, contact the merchant for a refund or exchange.
2, cassette stove assembly
We put the cassette stove base on the countertop, the gas cylinder bottle slot is not in the cassette stove base below the position, so we do not need to put the cassette stove upside down, when placing the cassette stove stove stove should be placed towards the top of the mouth. Next we snap the support bracket onto the base of the stove and screw the switch into the OFF position. After installation, we can shake the cassette stove, check the cassette stove has been placed smoothly, the cassette stove support bracket is not fixed.
3, the installation of gas canister
Gas canisters are generally installed in the card slot next to the cassette stove, we can see the side cover of the cassette stove has a round hole, we use our fingers to hold down the round hole and will be lifted up the side cover, you can open the side cover to see the gas canister slot. We will unscrew the cap on the gas canister, align the mouth of the gas canister bottle with the slot protruding part, and insert the gas canister bottle into the slot. Then we push the gas canister bottle towards the mouth of the bottle so that the mouth of the bottle fits tightly into the slot protrusion. Finally, we close the cassette side cover. After we install the gas canister bottle, you can twist the switch to check whether the cassette stove can light the fire.