The maximum temperature of the constant temperature incubator is 60°C.
Constant temperature incubator is a general term for a type of cavity with constant temperature effect. It is widely used in medical undertakings, mainly in scientific research undertakings such as pharmaceutical industry, medical and health care, biochemistry and agriculture. Used to culture microorganisms, biological tissues, etc. The maximum working temperature of the constant temperature incubator is 60°C for culture, incubation, etc. Power 500 watts.
Constant temperature incubators are used for drying, baking, wax melting, and sterilization in industrial and mining enterprises, laboratories, and scientific research institutes. The instruments and equipment of the constant temperature incubator adopt a microcomputer intelligent temperature control system with temperature control protection, which is accurate and reliable. The working temperature can be set arbitrarily, and it has a deviation alarm function. The air inlet can be opened and closed freely, and hot air can be circulated. When the temperature display of the incubator reaches the preset temperature value, cancel heating, turn off the heating switch, and confirm whether the heating indicator light goes out.
Maintenance of constant temperature incubator
1. Keep the surface of the incubator clean and beautiful.
2. The incubator should be placed indoors with good ventilation conditions, and flammable and explosive items should not be placed around it.
3. Do not overcrowd the items in the box and leave space.
4. The inside and outside of the box should be kept clean. It should be cleaned after each use. If it is not used for a long time, it should be covered with a dust cover and placed in a dry room.
5. Equipment managers shall conduct metrological verification according to the verification plan and conduct regular inspections on temperature control.
6. When the ambient temperature is high in summer, when the set temperature is lower than 40℃, "air conditioning" should be used to reduce the ambient temperature (25-28℃, this temperature must be maintained at night) to avoid causing Temperature out of control.
7. The incubator should not be placed in a place with high temperature or humidity, and avoid direct sunlight.
8. The fan in the incubator is regularly filled with lubricating grease.
9. If it is not used for a long time, the water in the water jacket should be drained, and neutral grease or Vaseline should be applied to the electroplated parts to prevent corrosion. A plastic dust cover should be put on the outside of the incubator. Place it in a dry room to prevent the temperature controller from being damaged by moisture.
For the above content, refer to Baidu Encyclopedia-Constant Temperature Incubator