Visiting the enterprise experience is to learn from the management experience and mode of operation of the excellent enterprises, to learn from, take the long and make up for the short, for their own business services, the following is my compilation of college students to visit the enterprise experience, welcome to refer to.
College students to visit the enterprise experience:
In order to our group of students who are about to enter the internship position, the school leadership have been given a high degree of importance, for us to open the enterprise practical training this course, and to be able to communicate with the entity company front, in my opinion, for the interns who are about to enter the workplace, the ability to go to the entity company before the job. In my opinion, for the interns who are going to enter the workplace, it is a great honor to go to the entity company (Hainan Insider Information System Co., Ltd.) to understand the situation and learn the business, I will make good use of this opportunity of practical training and learn more knowledge and skills that can not be learnt from books in the practical training. Through Mr. Jiang's words, I feel a lot, and I understand the demand of the enterprises to a great extent, and I fully realize that as a modern college student, I should treat my career with the same spirit and attitude as I do now.
Mr. Jiang mainly emphasized the following points:
1) the loyalty of the students in the company;
2) the psychological quality of the students;
3) the general obligations of the company;
4) the general assessment standards of the company.
Mr. Jiang paid special attention to the issue of interns' loyalty to the company. Nowadays, the job market is faced with a lot of college students who often jump from one job to another, and after learning a little bit in the company, they think they can go out to look for a company with a higher salary, so they go out to look for another opportunity, and they just taught a staff member that they can start working, and the staff member ran away. The loss of this phenomenon, the company is very big, this way, but also to spend time and money to hire the next employee, so this leads to a lot of experience in this kind of thing the company is not willing to go to hire just graduated college students, would rather go to hire a no education in the community has more than one year of experience in the work of the staff.
Therefore, as a college student, to cherish the employment opportunities, consciously cultivate the enthusiasm and loyalty to the enterprise; to find the combination of personal interests and corporate interests, down-to-earth, based on the overall situation, but also to do to set their own position, learning with an open mind, and strive to practice, to master the actual skills, cherish the opportunity in front of us, in-depth practice, to improve the technology, in the workplace to determine the goal, quickly to adapt to the environment, down-to-earth and practical, to improve the skills, and to improve the quality of life. Rapidly adapt to the environment, practical work to increase competence, for the future as soon as possible to assume greater responsibility to lay a good foundation.
In addition, I feel very y there is the company's competition, not only outside the company and the competition between the companies, the competition between the staff within the enterprise is also quite fierce, to Jiang's company, for example, the company every day every month within the ranking of the assessment criteria are published, which, in this way, will motivate the rankings of the staff to the back of the work of the vigor, to hear these, really feel that the workplace such as the killing fields, and not as I imagined, but also the work of the staff. I think it's a good idea to have the same kind of system in place, but on the other hand, this kind of assessment system not only improves our ability to resist psychological pressure, but also improves our ability to work very quickly, and closing our eyes and thinking about it is still a very good feeling, and we can't wait to get into the competition, even if we are dragged all over the place, it's worth it.
In fact, I would like to work in Mr. Jiang's company, I have always been quite interested in network marketing and promotion work, and the working environment there is really good, I hope that this company can continue to hone their own performance, in this nerve-racking work environment to grow quickly.
Through this company visit, I have a higher level of requirements for myself, and realized that there is a certain distance between the actual work and the book knowledge, and need to further study and practice to improve their own level. Not only that, but also to improve their loyalty to their chosen profession, and constantly improve their professionalism to adapt to the needs of the workplace.
In fact, the important thing is not what we have been taught, but what has been revealed to us and inspired us to think and study. Dean and Mr. Jiang's many plain words contain profound truths that we need to ponder over, and much more knowledge that we need to personally practice! As long as we are prepared to suffer, not afraid of pain, not afraid of tired, I believe our tomorrow will be better!
College students to visit the enterprise experience:
May 15, we came to Guangxi Nanning Phoenix Paper Co. >
Nanning, Guangxi Phoenix Paper Co., Ltd. is a state-owned joint-stock company, the company's project a project estimate of total investment of 1.8756 billion yuan, is the beginning of 1992 to prepare for the construction of 1999 was put into operation of large-scale pulp and paper enterprises, the annual production of 120,000 tons of pulp and paper, is the largest, the most advanced production technology and technical equipment, bleached sulfate commodity chemical wood pulp one of the most advanced professional production plant. Its products include? Jinfeng brand needle, broadleaf wood pulp and? Jade Phoenix? Brand household paper series: raw paper, tray paper, facial tissue, napkins, rolling paper, handkerchief paper, kitchen paper, hand towel, and by-products are turpentine and tarot oil.
Second, advanced technical equipment and application system
The company's main process equipment and control systems are imported from abroad, technical equipment to reach the early nineties international advanced level.
(a) its main process equipment are: Finland konewood company's cylinder peeling machine, Sweden kamyr company's single-tower hydraulic isothermal continuous digester and single-stage diffusion scrubber, Finland ahlstrom company's pressure in addition to the section of the machine, the five-effect plate falling film evaporator, flash drying of the energy-saving lime kiln, the Canadian sterling company's r8 law Chlorine dioxide preparation system, Finland tamplla company's low-odor type single steam bag alkali furnace, Sweden abb-fl?kt company's air cushion dryer.
(ii) the production of automatic control system for the introduction of Finland valmet company's computerized centralized control system (dcs) on the production process, equipment operation status of the whole process of real-time monitoring and display, operation control and information management.
(c) most of the electrical distribution equipment used in Sweden abb company's mcc control cabinets and acs500 series of AC frequency converter, DC drive control for the German siemens company's complete sets of products. Control equipment used in Germany siemens company, France schneider company, Japan mitsubshi electric company and omron company's programmable controller.
(d) In addition, the production of ? Three wastes? is also equipped with a perfect treatment system, in which the wastewater treatment using secondary biochemical treatment of the terminal wastewater treatment equipment.
Third, the enterprise internal information management
The director of the information center Liang gave us an explanation of the Phoenix Paper information management processes related to the operation, and to the procurement process, the production of living supplies process for example, and the central computer room of the teacher Li also gave us a detailed explanation of the Phoenix Paper information management of the hardware facilities and application systems and the main role. The company's management system has four main:
(a) enterprise resource planning erp management system, mainly applied to financial management and production control management.
(ii) oa office software system, mainly used in office management, can control the rights of each employee, but also used to store the company's relevant notices, documents and so on.
(c) antivirus software system, mainly used to defend against hackers and other undesirable network damage.
(d) Website management system, mainly used for the daily maintenance and management of the company's website.
The above can be seen, the company in the application of information technology is extremely broad, whether it is office management, production management, financial management and the company's website operation and management and so on are the application of modern information technology equipment. Such as modern enterprise resource planning erp system, for their production in the demand plan, production and procurement planning, procurement into the warehouse, out of the warehouse, etc. There is a great application, and more easy to the management of production. The oa system, on the other hand, is able to manage the company's relevant documents, notices, and events with detailed records. Phoenix Paper also used advanced foreign equipment for production, and these devices are closely linked with information technology.
Fourth, the scientific management concept
Phoenix Paper to ? Integrity, abide by the law, customer satisfaction; to protect the well-being of the environment, prevention and treatment; to create quality, promote development, continuous improvement? The quality of the environment, occupational health and safety policy and other management concepts to carry out the company's production and operation, so that the purchase of raw materials and market sales have been a virtuous cycle, from which can also be reflected in the phoenix enterprise so that there is a broad space for development of the enterprise.
V. Summarize
Through this visit, let me know a powerful enterprise is in their application of what kind of information technology, as well as their management system, the spirit of work, rather than just look at the surface of the success and splendor. In order to become a powerful enterprise, we should have our own management mode and certain technical equipments, only in this way can we manage the company properly, and at the same time lay the foundation for our own production. Improve the efficiency and credibility of the company, is a company to the future of the security.
Thanks to the teacher to give us this opportunity to visit, I hope there will be more opportunities to visit and learn.
University students visit the enterprise experience essay:
Production internship is an important part of the university internship, the school attaches great importance to each year, approved a large number of funds to arrange for students to visit various factories to internships, to increase the student's insights, consolidate the knowledge of the textbook, so that we understand some of the basic operation of the factory process, for our future learning and work to lay a solid foundation. The company's website has been updated with the latest information about the company's website.
Three weeks before the start of the department arranged for us to visit the Luoyang China Tractor, to participate in the production internship, so that we have learned a lot of knowledge.
Knowledge is the ladder of progress of mankind, and learning knowledge not only from books, but the important thing is to experience. Theoretical knowledge is often too standardized, just by mastering the theory, a little practical experience are not words, in fact, there is no practical effect, the reality is that things are often very varied, the use of the solution to the specific situation is mostly dogmatic. Countless facts have proved that: only a good combination of theoretical knowledge and practice, in order to apply the knowledge to the highest level, in order to learn to grow, learn to use, in order to transform the knowledge into their own ability to really have, in the face of a social environment full of competition and pressure, combined with their own professional knowledge, the school provides us with a lot of internships for our students to work out our, and I was lucky enough to enter the first Luoyang
Higher education
The general requirements of production internship for students in higher education are: to understand the society, to contact the actual situation, to enhance the mass view and sense of enterprise and responsibility, to improve the ideological awareness, to consolidate theories learned, and to obtain the preliminary practical knowledge of the specialty, in order to cultivate the practical working ability and professional skills. According to the requirements of this principle, combined with the training objectives of mechanical engineering, the following specific requirements:
1) Comprehensive familiarity with the manufacturing of mechanical products, the assembly process and its application of a variety of technical documents.
2) In-depth analysis of the machining process of typical parts and the assembly work process of the components to which they belong.
3) focus on understanding the typical parts processing equipment, fixtures (jigs, tools, gauges, auxiliary equipment) principle of operation, structural characteristics and scope of application. Part of the key process of special fixtures can analyze the positioning, clamping, and calculate the positioning error.
2. Internship requirements
i. Safety education
------XX August 12, the afternoon of the first tow training center we carried out safety education. The teacher gave us to see the safety production record and accident cases, some notes plus bloody cases, although I am very afraid, do not dare to listen to dare not see, but I can not, I have to listen to but also to see, but also to make notes, these bloody cases to the people sounded the alarm. The teacher gave us a lot of requirements, we must do, after all, the accident occurred who can not afford. XX September 11, we successfully arrived in Luoyang, a tow, after all the arrangements are made on the street to stroll around, just like that to measure the beautiful environment of this city, for us everything is new, different from Jiaozuo, she is more than Jiaozuo cultural flavor, and then ready to eat, we will look for those in Jiaozuo! After that, we went back to our accommodation and waited for the safety education in the afternoon. The only way to put an end to these safety hazards is to strictly comply with the safety requirements of the factory, the main precautions:
sandals are not allowed to wear into the factory;
into the factory must wear pants;
prohibited in the factory smoking, was found to be fine;
into the factory clothes are not allowed to be open, coats are not allowed to hang on the body, not backpack into the factory;
the factory is not allowed to be open, the coat is not allowed to be hung on the body, not backpack into the factory;
the factory has been the first time in the past few years that the company has been in a situation where the company has been able to provide the best services to the public.
People in the factory do not pile up, do not stand in the main road;
Attention to their own and the school's image;
Not allowed to mess with the buttons, switches;
attention to safety!!!!
Second, the content of the internship
(1) to understand the factory's production process, production line layout, technology and equipment; (2) record parts design and manufacturing process and equipment; (3) to master the knowledge and methods of machining process (4) to understand the knowledge of cutting tools, familiar with the structure of commonly used cutting tools, selection, use, etc. (5) to understand the machine tools and CNC knowledge, especially the machining centers and other typical CNC systems. Machining centers and other typical CNC equipment (6) to understand the enterprise production management mode, learning advanced management methods and methods (7) familiar with, consolidate the knowledge of casting process and equipment to consolidate the theoretical knowledge we have learned, and more so that we have learned the textbooks can not be learned to increase our knowledge, in the internship, we understand some of the basic operation of the factory process, the structure of the machine tool and its processing methods and control methods have a preliminary understanding, and the machine tool structure, selection, use, and so on. As well as a preliminary understanding of the control mode, the processing of some parts of a more detailed understanding of the process for the future workplaces to lay a good foundation. Of course, we are more important to consolidate the theoretical knowledge we usually learn, to understand how much they really learned, so as to make up for their own shortcomings.