1, check the cleaning tank to ensure that there is an appropriate amount of water in the tank (the water level should be at least 200mm above the transducer box).
2, according to the process requirements to add the appropriate amount of cleaning agent.
3, the power adjustment knob hanging to the minimum position.
4, close the power switch or plug the power cable into the power outlet.
5, open the power switch, the "power adjustment" knob to the desired power value, ultrasonic cleaner began to work.
6, stop working, the "power adjustment" knob to the minimum position, turn off the power switch.
Second, maintenance
1, such as the equipment is not used for a long time, please release the cleaning fluid and cleaning tank.
2, if the device is not used for a long time, please boot up once a month according to the operating instructions, work for half an hour.
3. If there is any technical failure, please notify us immediately.
3. Warning
1. It is strictly prohibited to start the machine without water in the cleaning tank.
2. It is forbidden to start directly with high power.
3, such as the site of corrosive gas concentration is high, please as far as possible to ultrasonic system away from the cleaning tank.
4, the boot state and shutdown within thirty minutes time, is strictly prohibited to touch the generator within the electronic components, capacitor storage of high-voltage electrical energy.