In the hot summer, the air is filled with heat, outdoors, whether you are working or not, or walking, will be hot. As a production workshop, it is even hotter to the staff fainted, the enterprise production capacity is reduced, the staff is inefficient. Many companies will find ways to solve the summer workshop plant stuffy, odor, poor ventilation and other issues, such as the installation of a large number of electric fans in the workshop, the ability of the enterprise, the plant sealing and good, the area is not too large, will choose the air conditioning to refrigeration. But this is not and energy-saving and money-saving solution.
So in real life is not really a device, both energy-saving, but also to achieve the cooling effect below 30 degrees? The answer is certainly there, for a variety of workshop, plant conditions are different, there are a variety of cooling equipment can be selected.
1, chiller cooling: chiller, as the name suggests, is a device that can produce a lot of cold air, the device's refrigeration source is water, said here may be a lot of people are beginning to doubt a problem, that is, the water itself is not cool in the summer, how to use water to cool down? In fact, the principle is very simple, in the Yue can chiller installed on all sides of 4 pieces of 10cm thick paper core, in the paper core is covered with dense small holes, the bottom of the device is a base that can hold 30 liters of water, there is a pump, when the pump works, the bottom of the device will be pumped out of the water from the top of the paper core of the uniform spray, like rain to the core of the paper as a constant supply of water, when the fan operation within the device When the fan inside the device began to pump, and the outside of the hot air will continue to enter the chassis from the paper core, when the hot air through the paper core, resulting in filtration, contained in the wind impurities will be filtered by the paper core, in the water will be adsorbed in the paper core on the impurities rinsed down. When the external 35 degrees of hot air through the paper core containing a lot of water, the hot air instantly absorbs water, and water into the same temperature, and the temperature of the water because of the continuous circulation, heat dissipation, and thus the water will become particularly cool. At this time and then by the fan will be cooled down by a steady stream of cold air transported to the workshop, the cold air into the workshop, and the hot air inside the workshop mixing, cold air absorption of hot air will be quickly through the opposite side of the open door and window discharge, and so the continuous cycle, half an hour after the workshop will be completely absorbed by the heat, and by the cold air control, and ultimately to achieve the purpose of cooling. So the advantage of the chiller is not to limit the sealing of the plant, you can open the doors and windows, a single device can control 120 square meters, the power consumption is only one degree of electricity per hour, you can reduce the indoor temperature to below 30 degrees.
2, negative pressure fan + water curtain wall cooling system: this system for the installation of large-scale pumping negative pressure fan on one side of the plant, the other side of the plant to install a 15cm thick water curtain wall, water curtain by the water pump a constant supply of water, when the installation of the fan fan side of the fan running, pumping more air per hour, so the new air will be from the other side of the installation of the water curtain wall to enter the large amount of air, air filtering, absorption of moisture, into cold air. Filtering, absorption of moisture, into cold air into the workshop, into the workshop with the flow of air will always be discharged from the side of the fan, so that the indoor hot air is constantly absorbed. Its advantage is that 100 square meters of area only needs 1 degree of electricity per hour.
It can be seen that no matter which kind of equipment is very energy efficient, and can achieve the purpose of cooling.