There are teach you to install single system, dual system and so on, with colorful pictures. I believe you will learn to install. My computer was installed here
Method 1:
First, make sure your CD-ROM drive is in the first boot order and supports booting from the CD-ROM drive.
To install from CD-ROM, set up your BIOS so that the system can boot from CD-ROM.
(2) Select the Advanced BIOS Features option and press Enter to enter the setup program. Select the First Boot Device option, and then press the Page Up or Page Down key on the keyboard to set the option to CD-ROM, so that you can change the system to CD-ROM boot.
(3) Return to the main menu to save the BIOS settings. (To save, press F10 and then Y.)
(4) Then put the CD-ROM into the CD-ROM drive and reboot the computer, the system will boot from the CD-ROM and display the Installation Wizard screen, and you can
follow the prompts to set up the installation step by step and you'll be OK.
Before you restart your computer for the first time after copying files to your hard drive, you must remove the CD-ROM from the CD-ROM drive, otherwise the system will still
boot from the CD-ROM and will cycle through the installation program.
Method 2:
Then, press any key to enter CD-ROM boot mode and load the Mini version of the operating system.
Then, press Enter to confirm to continue the installation.
Then, press F8 to accept the license agreement.
Then, select the location where you want to install, choose a large enough space and press Enter.
Then, select the file system, NTFS is recommended, and press Enter.
Then, a disk scan will be entered and the installer will be copied to the hard disk.
The computer will then restart after 15 seconds, press Enter to restart immediately.
The installation process then continues by booting from the hard disk, which begins in graphical interface mode.
After a series of hardware tests, you will be prompted to select a region, where you can configure the language, keyboard, and region.
You will then be prompted for a username and organization name, and a computer name will be generated that you can change.
Then, you will be prompted to enter the product registration code.
Then, you will be prompted to enter the administrator password.
Then, a component selection box will be displayed to select the Windows components you want to install.
Then, the time zone and time settings will be entered.
Then, go to Networking Component Installation (if your computer has a network card and is properly recognized during hardware detection).
After the network is configured, the computer will detect and install a series of Windows components and services.
Then, reboot and run the newly installed Windows.
Then, move to the final stage of the installation, which monitors for plug-and-play hardware that was not detected earlier.
Finally, it's ready to go!
Method 3:
Installing the system (the following is an example of installing WINDOWS XP)
I chose the full Windows XP installation CD without any cracks. Start the computer, when the word "CD-ROM startup press any key"
Enter, start copying the installation program, check the capacity and format of the system disk location, these can be ignored; appear on the system hard disk
file format selection is best AT32, do not choose NTFS. NTFS file system on the stability and speed of the xx work system and hard disk management
has a great improvement, but NTFS just support NT as the kernel of Windows NT, Windows2000, WindowsXP, does not support DOS
, WindowsME, Windows98. so, for the those of us who play with software a lot it is not suitable. Once a system crash occurs, under NTFS there
may be a need to reinstall the system by means of repartitioning, formatting, etc. As soon as the partition is repartitioned, the information and data on the hard disk is completely finished
. (This is a lesson I've learned the hard way. When I was using Windows 2000, I used the NTFS system, mainly to prevent
CIH viruses from destroying the system and hardware, but now it's too easy to prevent and kill CIH.) On the other hand, in a FAT32 file system, you only need to have a
98 or Me boot disk formatted. C disk can reinstall the system, and not afraid of losing all the data and information on the hard disk. (Regarding partitioning,
I won't talk about it here, there will be a chance to talk about partitioning specifically, including FDISK and DM's real-world xx practice, partitioning is a more dangerous and troublesome
situation)
Then, copy the system files, prepare for the installation, and other steps. A dialog box appears to select the time zone, language, etc. I don't need to tell you about that. Wait patiently
.
If the original installation of XP under DOS, you must first smartdrv.exe file (in the installation directory of Win98, named
smartdrv.exe) copied into the 98 startup floppy diskette, run it before the installation can be greatly improve the speed of installation. (I sometimes
run it before installing, sometimes I forget, but I don't feel much difference, or maybe my computer has more memory?
If you are reinstalling XP with the original system intact and with xx on the system hard drive, the "Upgrade
Fresh Installation" dialog box will appear during the installation process, and you will have to select Upgrade unless you want to install a dual-xx system on your machine.
When asked for the serial number, enter the following number:
BX6HT-MDJKW-H2J4X-BX67W-TVVFG
This registration code basically installs the system (I've tried at least 5 or 6 XP installer CD-ROMs), and usually the installation time is less than 60 minutes.
Installation is complete, choose not to activate now to activate later, press next, fill in at least one name, such as JixXP, all the way back to the key, you can
.
Now to activate the system: I used the Russian hacker's activation method. See the following instructions:
Method: Copy SETUPREG.HIV to the %systemroot%system32 directory
Overwrite the original file (I couldn't find this SETUPREG.HIV, I pasted it directly),
Reboot,
Press F8 to enter the Safe Mode, login as administrator,
Press F8 to enter the Safe Mode. Log in as administrator,
run WINXP_CRK.EXE, reboot, enter WinXP, select "Phone Activation" when asked to activate, and put
"401111" in each box. ---- activation was successful!
Western Electronics /, remember to download the license KEY when you download, you can use it for free for a month, in my opinion, it
is the best antivirus software of all the free download. Most importantly, this is the first way to make sure that your system won't get infected by a virus again after reinstalling the
system.
Step 7: Use kaspersky to scan for viruses, use the highest level, scan for about 20 minutes or so, if you confirm that there is no virus, then congratulations, your
love machine is back to life.
The eighth step is to immediately go to the SP2 patch, and pay attention to Microsoft's website, not from other places.
Step 9: Download the trial version of Skynet Firewall.
The tenth step, quickly find a genuine antivirus software can be used permanently, KASPERSKY itself is really good, very good reputation, but the price
too expensive, actually want 450 yuan, temporary emergency can, you do not care about the money does not matter, I have a machine infected with poison, Rising Star and the river is the latest version of Ruixing and Jiangmin
version, did not check the poison, with Kaspersky on the checking of poison! The first time I saw this, I had to use Kaspersky to get it back. Generally speaking, Rising Star and Jiangmin 2005 are enough for you to consider yourself
.
Note. In the above 10 steps, basically eliminate any piracy (I can't speak for your operating system), so the new
system should be pristine. Please don't browse any other websites or download or install any other programs locally until you've done the 10 steps above.
Finally, I believe that 99.9% of all viruses, after such a toss, are 100% finished on your machine.
The perfect way to activate SP2
--The only way to activate the SP2 upgrade of WindowsXP Professional
This is the only way to activate the SP2 upgrade of WindowsXP Professional
Since the official release of the SP2 version of WindowsXP on August 24th, 2004, we have been able to find out through many comparisons that it is the only way to activate the SP2 upgrade of WindowsXP Professional.
This is the only feasible activation method for SP2 - I think :)
First, download the official WindowsXP Professional and Service Pack2 Simplified Chinese version
Then, install the official WindowsXP Professional and Service Pack2 Simplified Chinese version
Then, install the official WindowsXP Professional and Service Pack2 Simplified Chinese version
This is the only feasible activation method for WindowsXP. Simplified Chinese official version
Finally activate windowsXP Professional Service Pack2
Specific steps:
The first step, please prepare the three necessary tools:
No. 1, 4 in 1 calculator
Quite efficient and accurate Microsoft Serial Number Calculator, fast, and almost all of the serial numbers calculated by the program. The serial numbers are almost all legal.
The calculator can be "through the calculation" of the four versions of Windows series: Windows XP Professional, Windows XP
Professional. VLK or Shanghai Government Edition, Windows Server 2003 VLK, and Office XP. (Note: It's best to fill in the
Random Seed column with any other number as a random seed when counting numbers.)
(You can test the legitimacy of this program at Microsoft's website by going to My Computer---Help menu---selecting "Is this Windows legal?" or by going to
Testing the URL: /resources/howtotell/ww/windows/ default.mspx. default.mspx Click
Validate Now button, and then follow the prompts to download the ActiveX control can appear Thank You!)
NO.2, XP check the number to change the number of Keyfinder1.41
The software is used to view and change the CDKEY, mainly to change some of the activation server has been flagged by Microsoft's installation of the serial number of "illegal"
number :)
NO.3, Online Activation Program 1.0
At present, SP2 activation must be activated online, this program is developed in the SP1 era of effective online activation, although in the SP2 era
generation, activation will have an error message, but is still the only effective method to ensure that Microsoft activation servers can be detected successfully.
Preparing these three tools is the only way to activate Xp SP2 today.
The second step is to install WindowsXP Professional and SP2:
No.1, install WindowsXP Professional, note that the installation serial number must be calculated using a 4-in-1 calculator, which can be calculated before the installation of a good note,
just in case of an accident, and it is best to fill in the random random seed and then tap Generate to generate the serial number. Seed and then tap Generate to generate it.
(The reason why we don't recommend the serial numbers provided in the vast number of pirated CD-ROMs and downloadable installers is that many people are using them, and because the market for users with the same
serial number is so large, they are easily banished by Microsoft!
(The reason why randomly fill in the Random Seed and then click Generate to generate, is to prevent with the majority of lazy D version of the hands of users are using 0 to do seed generation and
lead to the use of the same serial number, so the conflict :)
No. 2, the installation of the official Simplified Chinese version of the SP2 official, pay attention to the installation of the SP2 does not have to activate the former! WindowsXP.
The third step, activate the SP2 version of WindowsXP Professional:
**Suggested Tip: It is best to do a Ghost clone backup at this point in time without activation.
**Run the Online Activation Program 1.0 (critical step!!!)
(1)Click on the small window with your mouse :)
(2)Wait :)
(3)When the activation window appears, please select "Activate via Internet"
(4)You can choose not to register (registration is also possible, name, password, Email verification code..., it's a pain in the ass).
(5)Fill in the serial number you used in the last step of the installation
(6)Click retry
(7)An error message appears (this step must be ignored, it's normal)
(8)Reboot your computer
(9)Don't run the Activate windows in the start menu directly
( 10)Run online activation 1.0 again
(11)At this time there are two kinds of situation: A. Prompt windows has been activated! (You can skip to step 21 directly:)
B. No successful prompt, still repeat the previous interface, then please do not worry, you are just one round away:)
(11) still select "Activate via Internet"
(12) do not register
(13) pay attention to here! Instead of "Fill in the serial number from the installation" and "Retry", click "Phone"
(14) Select "Change the ID"
(15) Use the 4in1 calculator to calculate a new serial number
(16) Fill in the newly calculated serial number
(17) Tap "Update" (18) There is an error message, but still don't pay attention to it
(19) Reboot the computer
(20) Tap "Update" to update the serial number
(21) Tap "Update" to update the serial number
(22) Tap "Update" to update the serial number
(23) Tap "Update" to change the ID. ) Restart your computer
(20) Run Online Activation 1.0 again
(21) You should be able to activate it successfully by the second step!
So far, WindowsXP Professional SP2 has been successfully activated. (If still unsuccessful, please always repeat the above 8 ~ 20 steps, until the loss of patience
Heart:)
***Suggested Tips: Finally, at this point in the activation of the XP partition where the important personal data and files back up the premise of the change of the system day