In order to strengthen the operation of the equipment inspection, timely detection of equipment abnormalities, to prevent equipment accidents, to ensure the safe, economic and stable operation of the equipment, the special equipment inspection management regulations, the following is what I have organized the equipment inspection management regulations three, welcome to refer to.
I. Purpose
In order to strengthen the operation of the equipment inspection tour, timely detection of equipment abnormalities, to prevent equipment accidents, to ensure the safe, economic and stable operation of the equipment, specially formulated this system.
Second, the scope of application
This system specifies the maintenance, operation personnel of the equipment system inspection tour management functions, management and requirements, the provisions of the regular inspection of equipment, inspection and assessment.
This system applies to the inspection of the equipment system. Operation and maintenance personnel should be well versed in this standard.
III. Normative References
Compilation of Rules and Regulations of China Guodian Corporation
IV. Definitions, Terms and Abbreviations
(1) Company
Guodian Power Inner Mongolia New Energy Development Co. Management, hierarchical responsibility, operation and maintenance personnel are specifically responsible for the power station under the jurisdiction of the equipment inspection tour.
Six, management content and requirements
(a) tour inspection
Tour inspection is the production of personnel on the production site to check the operation of equipment, timely detection of equipment abnormalities, to prevent equipment accidents, to ensure the safe and economic operation of the equipment is essential to the main measures, the contents of the tour inspection include:
1, shift changeover inspection;
2, regular tour inspection;
2, regular tour inspection;
2, the production site of the equipment, the production site of the equipment, the production site of the equipment, the production site of the equipment, the equipment and the production site of the equipment. 2, regular inspection tours;
3, preventive inspection;
4, special circumstances check.
(B) the requirements of the inspection tour
1, all types of inspections should be able to work independently of the production management personnel, maintenance, operation personnel, alone patrol high-voltage equipment must be approved by the Ministry of Safety and Production.
2, tour inspectors must comply with the power station to develop the provisions of the tour inspection, according to the time, route and project inspection, so that the inspection is strict, detailed, no omission.
3, tour inspection must carry the necessary inspection tools.
4, the inspection tour is not allowed to remove the maintenance safety measures, move and cross the fence, as well as messing with the equipment in operation.
5, tour inspection should be focused, to do? Five to? That is: legs to run to, eyes to see, ears to hear, hands to touch, nose to smell.
6, need to focus on checking the equipment
(1) overload and long-term full-load operation of the equipment.
(2) in abnormal operation and defective equipment.
(3) Equipment that has just been operated or adjusted.
(4) Newly put into operation equipment (including overhaul of the equipment into operation).
(C) inspection cycle and content
1, substation inspection once a day. Inspection content includes transformers, sulfur hexafluoride switch, knife gate, capacitors and high-voltage switchgear and other equipment operating normally.
2, the field collector line inspection once a day. Inspection content includes tower tilt, cross stretcher skewed and tower parts corrosion deformation, defects; conductor, ground line corrosion, broken strands, damage or flash burns; pulling line tightness; lightning arrester and cable with or without anomalies; gold, insulators are intact and so on.
3, box variable inspection once a month, the specific time and fan appearance check the same. The inspection includes sound, temperature, oil level, status indication and whether there is a firing discharge phenomenon.
(D) regular inspection of duty personnel
1, duty personnel tour inspection according to the power station inspection route and content.
2, the duty officer in the inspection if found to jeopardize the equipment or personal safety, in addition to the relevant provisions of the emergency measures to be taken, immediately report to the chief.
3, inspection personnel must make inspection records, and inspection found and deal with equipment defects in the equipment defects register, temporarily unable to deal with, and does not affect the safe operation of defects in the equipment, major and minor repair program processing.
VII. Inspection and assessment
(a) The power station should be in accordance with these standards from time to time on the inspection of equipment, and according to the results of the inspection of the responsible person for the assessment.
(b) for equipment accidents due to violation of the inspection management system or the company's management personnel found that the duty officer did not carry out the inspection or inspection in accordance with the provisions of the inspection, the responsible person will be assessed.
Equipment inspection management regulations 2
The first for the implementation and strengthening of equipment operators, maintenance and transportation personnel and equipment management personnel of the equipment inspection work, and effectively do a good job in the use of equipment, management and maintenance of equipment to maintain equipment in good condition, the development of this system.
Article II of this system applies to the company's production process equipment, piping, power equipment, general equipment, lifting and transportation equipment, fire-fighting equipment, instrumentation and other machinery and equipment equipment inspection tour.
Article III must seriously implement the operator, machine, electricity, instrumentation and equipment management personnel of the equipment inspection system to ensure that the production equipment is safe, stable, long cycle operation.
Article IV equipment management department must strengthen the operators, machine, electricity, instrumentation and grass-roots equipment management personnel to ensure the organization and leadership of the equipment inspection tour. The development of perfect equipment inspection management rules, clear responsibilities and implementation methods, to determine the equipment inspection areas, routes, cycles, key inspection parts and content requirements.
Article V operators, machine, electricity, instrumentation and equipment management personnel to seriously carry out equipment inspection according to the requirements of the equipment inspection management rules, to understand the operating conditions of the equipment, found in the inspection of the equipment abnormalities, to eliminate the defects in a timely manner, make a good record of the equipment can not be immediately eliminated defects should be reported to the relevant departments in a timely manner.
Article VI inspectors should fill out the equipment inspection records in a timely, accurate, clear and conscientious manner.
Article VII of the leaders in charge of equipment at all levels should regularly inspect the equipment inspection work, and promptly solve the problems arising from the equipment inspection. Equipment management department of the equipment inspection staff inspection methods and the use of equipment to guide, and teach the appropriate basic theoretical knowledge, in order to gradually improve the equipment inspection staff to determine, deal with equipment failure, to ensure that the quality of equipment inspection work.
Article VIII of the machine pump equipment to implement point inspection system, the implementation of the "machine pump management system". The relevant requirements.
Article IX units should continue to summarize experience and improve the level of equipment inspection work.
Equipment inspection management regulations 3
First, the equipment referred to in this system for the production workshops belonging to the machinery and equipment and related facilities supporting it.
Second, the equipment operator referred to in this system is responsible for the use, maintenance and management of equipment in the workshop personnel.
Third, the equipment operator equipment inspection management
1, the operator every day on the use of equipment inspection, check the project for power is stable, reliable transmission, lubrication requirements are met, whether the instrument is normal, and the equipment on the product yield and quality of the impact of other issues.
2, simple problems can be repaired and resolved on their own to restore the normal state of the equipment;
3, larger failures to take active measures and report to the person in charge of the workshop.
Fourth, the duty officer equipment inspection management
1, the duty officer should be on a daily tour of the equipment inspection management; keep abreast of the equipment, found that the problem is solved in a timely manner, the problem is serious equipment should be reported to the workshop supervisor, will be included in the maintenance program.
2, the duty officer tour inspection items include: whether the operator to comply with operating procedures, equipment operation is normal, equipment parts and safety guards are complete and effective, equipment lubrication according to the requirements of the equipment, equipment, there is no running, bubbling, dripping, leaking phenomenon. Position on the equipment inspection records, running records are complete, complete, fill in the master, whether timely, accurate, neat
V. Workshop equipment inspection management
1, the workshop should be regularly organized to the workshop on the equipment inspection tours. Equipment tour inspection methods should be able to visualize the implementation of inspection, such as filling out records, the use of hanging cards, hanging card registration, that the inspection has been carried out.
2, the workshop should be immediately resolved on the inspection tour out of the problem in the form of a "notice sheet" to put forward their views, and the content of the problem, the solution to the problem, the deadline, the responsible person, the effect, rewards and penalties provided for.
3, the inspection found in the accident hidden danger, should take positive measures, according to the circuit inspection of equipment failure parts, causes, cycles, etc. to systematically analyze, for equipment repair, maintenance to provide the basis.
Six, the workshop on the installation of equipment, use and maintenance of management responsibility for the inspection tour out of the problem should be resolved in a timely manner, for issues beyond the scope of workshop management should be reported to the competent leadership.
?