Hinge installation adjustment method is to loosen the fixing screw on the hinge with a screwdriver.
Normal hinges are adjusted by the front and rear, first remove the fixing screw on the hinge seat, slightly change the location of the hinge arm, generally there is a 2.8 mm adjustment area, after adjusting and then tighten the screw can be. Hinges are mechanical devices used to connect two solids and allow relative rotation to be done between the two, hinges can be composed of removable components, or composed of collapsible materials.
Hinges are more installed on the cabinet, according to the material classification is mainly divided into stainless steel hinges and iron hinges. In order to allow people to get better enjoyment and the emergence of hydraulic hinges, which is characterized by the cabinet door closure to bring the buffer function, minimize the cabinet door closure and cabinet collision noise.
Hinge purchase method:
1, look at the surface
For high-quality hinges, its surface in the treatment of the more delicate and flat, with a hand touch will not have a rough feeling. And its hinge plating is very thick, usually 2~3 layers of plating, corrosion resistance is very good. So when you buy, you can touch and observe the basic identification of product quality.
2, look at the details
When buying, pay attention to observe the details of the product, such as the quality of the screws, usually hinges will come with two adjusting screws, which are used to adjust the up and down and front and back. Many people will ignore the quality of the screws, in fact, once the screws appear rust and corrosion, will have a direct impact on the use of the product, and in serious cases, will also make the door fall, affecting the aesthetics.