Equipment monitoring testing and maintenance system?

1, the purpose of the laboratory staff to ensure the safe use of various types of testing equipment, maintenance of the normal operation of the test work to ensure the smooth progress of the test work. 2, the scope applies to a variety of testing instruments within the test department. 3, the responsibility of the 3.1 The center's test department personnel must regulate their own work with this system. 3.2 The person in charge of the test department is responsible for the inspection and supervision. 4, the system requirements 4.1 Various facilities in the test section to comply with relevant regulations, all instruments used should be certified for safe use. Test Section power supply lines must be installed in the circuit breaker and leakage protector. 4.2 Section of large instruments, equipment, precision instruments by the person responsible for the custody, registration, archiving, instrumentation and equipment users, need to be trained in professional and technical training. 4.3 Section of the instrumentation and equipment should be used in the validity of verification and calibration, and in accordance with the requirements of the verification cycle of the self-inspection or strong inspection, the use of the instrument of the frequency of use of the provisions of the verification period in the verification cycle 4.4 The main instruments and equipments should establish the use records, with operation procedures, precautions, relevant technical parameters and maintenance records, and put them in a visible and easy-to-read position. Instrument users must carefully follow the operating procedures, and make a good record of the use of instruments and equipment, regular maintenance of instruments and equipment. 4.5 The power supply used by the instruments and equipment must meet the power supply requirements of the instruments and equipment. Electricity instrumentation must be safely grounded. Power sockets shall not be overplanted use. Instruments and equipment in the use of the process of disconnection protection, must be identified in the cause of power failure, and then connected to the power supply. It is not allowed to use the equipment with electricity safety hidden danger (such as leakage, broken power socket, poor grounding, bad insulation, etc.).4.6 Instrumentation and equipment in the process of using abnormalities, at any time to record on the random file of the instrument, the maintenance must be carried out by the professional staff, and make maintenance records.4.7 Instrumentation and equipment after the use of the end of the day, it must be checked and cleaned up according to the routine maintenance to maintain a good state.4.8 All instruments and equipment should be affixed with unique identification and permitted, restricted and prohibited signs. 4.9 Long-term electrical equipment (such as refrigerators, incubators) should be regularly inspected and the operation recorded. 4.10 Instruments and equipment that may produce some kind of hazards due to malfunctions or operational errors must be equipped with corresponding safety protection devices. 4.11 Before using instruments and equipment that are directly exposed to pollutants, it must be verified that the corresponding safety protection devices can be normal activation. After the completion of the experimental work, the instruments and equipments in contact with pollutants must be cleaned and sterilized accordingly. 4.12 Special persons should be appointed in the section to maintain and manage the safety equipment and experimental facilities/equipments to ensure that they are in perfect working condition. Instruments and equipment should be energized and dehumidified regularly when they are not in use for a longer period of time. There are records to keep the equipment clean and dry. (e.g. Biosafety cabinets should be routinely tested once a year, with special attention to high efficiency filters. Regularly check the centrifuge barrel and rotor of the centrifuge).4.13 When the autoclave is in use, biological indicator testing should be carried out regularly. The above is the content of the Zhongda Consulting collated

More about the engineering/service/procurement category of the tender writing production, to enhance the winning rate, you can click on the bottom of the official website customer service for free consultation:/#/?source=bdzd