The charging mode can be roughly divided into three kinds:
1, according to the building area charges Representing province - Henan
2, according to the fire protection cost charges Representing province - Hunan
3, according to the fire protection system charges Representing province - Shandong
The building fire protection facilities maintenance fee for the fire self-emitting alarm system maintenance costs for the calculation of the basis, plus the other related facilities maintenance costs, for the total cost of the project. The total cost of the project is based on the cost of maintenance of the fire alarm system, plus the cost of maintenance of other related facilities.
Calculation formula:
M=A+B+C+D+E+F
Where:M=Total cost of maintenance of building fire protection facilities A=Maintenance of fire alarm system
B=Maintenance of self-moving fire extinguishing system
C=Maintenance of smoke evacuation system
D=Maintenance of fire shutter system
C=Maintenance of smoke evacuation system
D=Maintenance of fire shutter system
D=Maintenance of fire protection system
D=Maintenance of fire protection system
E=Maintenance cost of fire hydrant system
F=Maintenance cost of fire broadcasting and evacuation signs Maintenance cost of fire automatic alarm system A, calculated according to the size of detector number and the service life of the system, is shown in the table below. [The cost of maintenance of the automatic fire alarm system A, calculated according to the size of the number of detectors and the number of years the system has been in service, is shown in the table below.
If there is an automatic fire extinguishing system, B=40%A;
If there is a smoke evacuation system, C=25%A;
If there is a fire shutter system, D=200RMB×number of shutters; if there is a fire hydrant system, E=35%A;
If there is a broadcasting and evacuation signage system, F=20%A.
Expanded:
I. Scope of maintenance and repair of fire protection facilities
The scope of maintenance and repair of the automatic fire alarm system includes:
1, automatic fire alarm system
2, automatic sprinkler system;
3, gas fire extinguishing system;
4, fire hydrant system;
5, fire linkage equipment maintenance and repair is responsible for the interface to the fire linkage equipment;
6, fire alarm lines and fire linkage lines and fire linkage power lines, piping problems including short circuit, disconnection.
My company will maintain, repair the scope of the failure of free manual repair (such as man-made short-circuit, disconnection, equipment damage and other faults are not part of the scope of maintenance); such as equipment aging and damage, can not be repaired, your unit is responsible for the purchase of new equipment, my company is responsible for the installation.
System testing and maintenance process, your unit should provide the necessary working environment and personnel to cooperate, otherwise unpredictable losses I have the right to refuse to pay and provide the above services.
Two, the scope of services of the subsystems in the fire protection system
1, automatic fire alarm system
(1) Regular inspection and testing of the fire alarm system.
a. Test the functions of the fire alarm controller.
b. Use special testing equipment to test the detector's action and confirmation light display in stages and batches.
c. 1-2 times a year on the backup power supply charging and discharging test, 1-3 times the main power supply and backup power automatic switching test.
(2) Regular inspection and test of fire system linkage equipment.
a. Do the fire fighting linkage test twice a year for the control equipments such as smoke prevention and exhaust equipment and fire shutter door.
b. Conduct fire linkage test for fire incident broadcasting twice a year.
c. Conduct fire linkage test for elevator to stop at the first floor twice a year.
d. Fire communication equipment in the fire control room twice a year for intercom call test.
e. Two fire linkage tests per year for forced disconnection of non-fire fighting power supply.
(3) Repair faults in automatic fire alarm system control wiring and linkage wiring.
(4) Repair faults in the automatic fire alarm system.
(5) Inspection and maintenance of fire communication lines of automatic fire alarm system, power supply inspection of fire mainframe and faults in grounding lines of fire mainframe.
Reference: