What are the famous blow molding machines abroad, price

Jomar: three blow molding technology experts Jomar (Jomar) was founded in the United States in 1968, 1969 began to provide the plastics industry injection blow molding machine (referred to as injection blow molding machine). The world's first commercially viable, fully tested, molded blow molding machine was supplied by Jomar. 1990 Jomar built a 41,000 square foot facility in New Jersey and manufactures approximately 50 blow molding machines per year, which are used in a wide range of industries such as pharmaceuticals, healthcare, household chemicals, and food packaging, as well as in the production of personal healthcare products and industrial tools. Over the years, Zuima company continues to introduce new models of injection blowing machines, constantly updated or adopt new technologies to better meet the needs of users and promote the development of the packaging container industry. In 1995, Zuma invested in Italy to set up a factory to produce extrusion blow molding machine (referred to as extrusion blow molding machine). Despite the late entry into the field of extrusion blowing machine, especially in Europe in this field there are many companies, but by virtue of Zeuma's strong technical accumulation for many years, application and market experience, especially the new technology and market application of the combination of the ability to grow steadily, the company continues to grow and develop. By now, the extrusion and blowing machines produced in Zuma's Italian factory have been sold all over the world. Zhang Wenyang, Zuma's sales manager in China, said that the company's equipment should be the best choice when considering the long-term return on investment and high technology. He said he was pleased to see that more and more Chinese customers are willing to pay for high quality. Zuma's IBM series are injection blowing machines. According to manager Zhang, because of Zeuma's unique process of injection blowing machine, so there is no bottle cut-off blank mouth, bottle injection molded into a precise size, wall thickness uniformity, smooth surface, no waste in the production process, less auxiliary machines required and so on. In addition, the equipment production cycle is short, the production capacity is very large, the equipment is highly automated, thus considering the long-term operation, the total cost of investment and use is low. Zuma's EBM series are extrusion blowing machines. There are single-station and double-station models; production containers up to seven layers; the use of the famous Mueller extruder head; wall thickness control using Moog; the application of Jefferies total control system; ...... application of in-mold labeling technology; with a patented hydraulic drive design, thereby achieving a significant reduction in energy consumption; ... ...application areas are food; beverage; dairy products; daily chemical products; pesticide chemicals; automotive parts and so on. It can be said that this is a machine with excellent cost performance. Zuma injection blowing machine clamping force from 12 tons to 200 tons. Advanced features such as: Programmable process control Optional power supply to the machine Optional plasticizing screws; PE, PS, PP universal screws; PVC, PP, PC special screws Screw tachometer Two-stage pressure blowing 15,000psi pre-blowing (for PVC) Heating zone ammeter Continuous blowing air discharge Hydraulic drive of the plasticizing screw Multi-point digital temperature display Multi-point hydraulic display ANSI/SPI B15.21 1986 Safety Protection Optical Billet Detector Runtime Recorder Zeoma Extrusion-Blow Molding Machines for HDPE, LDPE, HMW-HDPE, PC, PP, PVC, and PETG Aoki: One-Step Blow Molding Saves Time and Money AOKI, the Aoki Research Institute, offers a patented injection-stretch-blow molding machine that is designed to save time and money by providing a one-step blow molding process. AOKI's injection-stretch blow molding machine from AOKI Research Institute (Japan) realizes the production of high-quality plastic containers directly from raw materials in a single machine, with its patented "Direct Heatcon" as the core technology. The machine is suitable for PET, PES, PC, PA, PP, HIPS, PEN and other materials, and is widely used in the production of packaging for cosmetics, pharmaceuticals, beverages, detergents, spices, drinking water bottles, car wax/engine oil and other industrial fields. The so-called "direct temperature adjustment method" refers to the use of the heat retained during the molding of the bottle embryo to directly extend and blow molding, thus eliminating the energy consumption required for reheating, shortening the cooling time of the embryo, and realizing the miniaturization of the configuration of the chilled water equipment. In addition, one-step blow molding has the following advantages: 1. Directly using raw materials to produce containers, eliminating the cost of material management and preform transportation, and reducing the risk of damage or contamination of preforms in the transportation process. 2. The temperature distribution of the preforms is directly regulated in the mold cavity, so that the preforms have the most suitable temperature required for stretch blow molding with uniform thickness. Generally speaking, reheating is easily affected by a variety of variables (temperature and humidity, material condition, etc.), and it is difficult to produce uniform containers. In order to prevent the occurrence of defective products, it is necessary to take a larger safety margin - increase the thickness of the preform. This increases the weight of the container to a certain extent and wastes raw materials. AOKI's preform molding technology thickens the part that needs to be extended and thins the part that does not need to be extended, so there is no need for a safety margin, and the product is lightweight. 3. AOKI's molding machine takes only 4 seconds from preform removal to stretching and blow molding, with a 120-degree rotation of the rotary disk. This eliminates the need for multiple processes required by many two-step processes, and contributes to a significant reduction in energy consumption. Aokigu's AOKI series of blow molding machines can also use recycled PET bottles that have been crushed and cleaned for injection, extension, and blow molding directly, eliminating the need for a conventional PET regranulation and recycling system, and therefore eliminating the cost of recrystallization. And the products are of very high quality. A spokesperson for Aoki noted that the rise of PET bottles in recent years is due to the fact that they are lighter and safer than glass bottles, and do not have the environmentally unfriendly and harmful qualities of PVC bottles. In addition, its transparency allows consumers to see the contents clearly. These advantages have made PET bottles increasingly popular for many packaging applications. The spokesperson also pointed out that international crude oil prices have risen sharply, which has led to an increase in the price of PET materials. Packaging container manufacturers are therefore keen to reduce the weight of products of all sizes. In response to this trend, Aokigu has developed containers with a volume of 1.5 liters and a weight of 16 grams, containers with a volume of 1 liter and a weight of 14 grams, and containers with a volume of 750 milliliters and a weight of 11 grams. These containers are as thin as film and can be easily crushed. Therefore, it is very environmentally friendly in terms of both material saving and waste disposal. Aoki Kogyo Research Institute introduced a soft, ultra-light container with a lid called "Ugly Duckling" at the Asia Beverage Expo 2005. It uses half as much PET material as ordinary containers, and can be kneaded by hand after disposal, reducing the volume of waste. It is an economical and environmentally friendly product in every way. The reason why it is called "ugly duckling" is because it is easy to be crushed, can not stand after filling, and there are a series of thorny problems in the mold making, filling, marketing and so on. However, it was developed in response to market demand and has many added values that are different from those of traditional bottles. One of the benefits is that the model can produce containers with a large curvature for easy transportation. The second is that its off-center spout and easy-to-squeeze bottle make it easy to pour even viscous liquids quickly. Moreover, since air is not easily trapped inside the container, it can be ensured that the product will not deteriorate over a long period of time if it is filled with products that are easily oxidized. In addition, their products also feel particularly good in the hand and can be described as light and easy to use. The company's spokesman also revealed that they attach great importance to the Chinese market, hoping that with China's accession to the World Trade Organization to serve more Chinese customers and bring them good profits. Some of the configurations of the upgraded model of AOKI blow molding machine Gas recovery system: The compressed air used for blow molding can be partially recovered to the storage tank as compressed air for operation, which can save 15-30% of compressed air. Fast cycle structure: the synchronized opening and closing action of the upper and lower molds of the preform forming mold can shorten the cycle of air transportation by nearly 2 seconds, which is about 10-15% shorter than the previous forming cycle. Strong blowing system: The upgraded model is equipped with a strong blowing system (blowing force up to 3MPa), which is more suitable for the stable production of complex bottle shapes. Dual use of hot runner: In the past, the hot runner nozzles had to be changed when the preforms of different lengths were changed. On the current upgraded model, only the number of pads under the blow molding unit needs to be adjusted, and the nozzle does not need to be replaced. This shortens the mold changeover time and significantly reduces the cost of the mold hot runner. Injection pressure increase: By increasing the injection pressure by 25%, thin-walled preforms can be stably molded. By molding preforms with a wall thickness of 1.9 mm, lightweighting has brought about high speed. Yaqi: High product speed and full specifications Founded in 1974 by Dr. Anthony Tam, the Yaqi Group in Hong Kong has grown to become a conglomerate of more than 1,500 employees, integrating the manufacture of blow molding machines, blow molding and injection molds, and blow molded products. Its head office in Hong Kong occupies more than 25,000 square feet and is the centerpiece of the company's overall planning and development of overseas markets. Its Yaqi Industrial Park in Kaiping, Guangdong Province covers an area of more than 200 acres and is a large and perfect research and development and manufacturing base for blow molding machinery, blow molds, precision injection molds and blow molded products. In addition, Yaqi has a 120,000-square-foot blow mold manufacturing plant in Shenzhen. This large scale has made Yaki a major player in the blow molding industry in China and around the world. Yaki's blow molding machines are capable of producing pharmaceutical bottles as small as 1 ml, as well as large containers up to 1,000 liters in volume. Therefore, Yaki products are applicable to a wide range of markets. The cosmetics and personal care industry is an important market for Yaki's blow molding machines, accounting for about 40% of its total production, including the global plants of Procter & Gamble, the largest company in the industry. Other markets include industrial oils, toys, accessories for industrial use, pharmaceuticals and pesticides. Geographically, 70% of Yaqi's products go to the export market, and only 30% are sold in mainland China, but this 30% of production has accounted for a larger share of the domestic market. Dr. Tan said that Yaqi has been focusing its sales on the overseas market because of its emphasis on developing high-quality machines. In recent years, with China's accession to the WTO, more and more companies are also selling their products to the international market, so Yaqi has also begun to focus on expanding the domestic market. Dr. Tan pointed out that product quality is an important guarantee for Chinese enterprises to stand firmly in the international market. And "if you want to do a good job, you have to make a good tool first", so it is very important to use a good blowing machine to keep long-term stable orders. Therefore, in order to contribute to the improvement of China's bottle blowing industry, Yaki plans to expand its sales in China. Yaqi will adopt the installment payment method to win some manufacturers who do not have the ability to buy the equipment with high configuration and good quality, but the price is too expensive. For example, customers only need to pay 80% of the price of the general machine, you can buy back a better configuration of the equipment, the balance will be paid in installments. When asked by this reporter whether this initiative would bring too much bad debt to the company, Dr. Tan said, "I believe that good machines will bring better benefits to the manufacturers. And with better benefits, manufacturers will not begrudge paying the final installment." Yaqi's AO-50SN and AO-70SN models are high-quality, fully automated in-mold labeling and blowing machines. It integrates wall-control, double-layer **** extrusion, and in-mold labeling technologies, and is advanced, efficient, and reliable. It was awarded the Equipment Design Merit Award by the Chinese Manufacturers' Association of Hong Kong in 2000; and the Utility Model Patent Certificate issued by the State Intellectual Property Office of the People's Republic of China*** and the State of China in 2001. Yaqi's thin-wall blow molding machine control technology as early as 1987 was awarded the Hong Kong Chinese Manufacturers' Association of the "computer-controlled self-adjusting wall thickness automatic blow molding plastic machine new product awards". "Little prodigy" is one of the best-selling products of Yaqi. With its compact structure and affordable price, the machine not only meets the needs of rapid production, but is also easy to operate. The standard model is equipped with a spout recycling conveyor, and the finished blow molded product will be sent out along the slanting groove for fully automated production. Its special design is best suited for high volume production of small containers as small as 1 ml, and can also be used to produce products with a volume of 16 ounces. The machine is available with single, double, and triple die heads for different batch sizes. For medical applications, a special die head made in the USA is available as an option. Under normal conditions, the cycle time of blow molding with three die heads is 7-8 seconds, and the successful blowing out quantity of PE medicine bottles of 18mm height can reach 70,000 pcs per day. In addition to PE materials, "Little Prodigy" is also suitable for PP, PETG and PVC materials. In addition, this model reduces energy consumption by nearly 50 percent thanks to an adjustable pressure device that activates pressure only when necessary. The latest model introduced by Yaki is its "Cyclone" rapid traverse series, with the "Cyclone 800" model capable of automating the production of 10 dies and 20 cavities, with a capacity of up to 6,000 pieces per hour. In order to keep pace with the development of the international blow molding industry, and to keep abreast of the latest blow molding technology information from abroad, in addition to facilitating communication with overseas customers, Yaqi has hired several experts from the United States. Dr. Tan pointed out that in the future, those machines with low automation and slow production speed will be gradually eliminated because their cost/profit ratio is not competitive. Low price and low quality is not the best choice for future development. Yaqi has a machining workshop with an investment of more than 70 million RMB, including a machining center from Japan worth more than 12 million RMB and other high quality equipment from Japan. The good level of machining ensures that every part of Yaqi's products achieves high precision. In addition, in order to ensure the long-term stable operation of the machine, other high-tech parts that need to be purchased are from Germany and other advanced suppliers. Talking about the company's future development in terms of bottle blowing equipment, Dr. Tan revealed that Yaqi has begun to devote itself to the development of PET bottle models, and it is expected that a mature and competitive PET bottle machine will be launched in two or three years. The success of Yaqi's operation over the years comes from its excellent management philosophy. Dr. Tan believes that Chinese traditional culture focuses on the human touch, while Western management philosophy focuses on effectiveness, and that it is necessary to organically combine the two in order to achieve management success. When you visit Yaqi Industrial Park, what you see is not only the well-equipped and orderly modern factory, but also the karaoke hall, soccer, basketball, mini golf factory, and a whole set of living environment such as staff dormitory building. In addition, Yaqi has more than 20 sales and service outlets in China. Each machine can be specifically customized according to the customer's order, such as products, production and delivery time.