Decoration of the end of the decoration problems need to pay attention to what details

1, lamps and lanterns equipment: according to the lamps and lanterns equipment occasions and use, lead to each lamps and lanterns wire core smaller cross section should be in line with the rules of the relevant regulations and standards in the masonry structure of the equipment electrical lighting equipment, fixed pieces of the bearing capacity should be matched with the weight of the electrical lighting equipment. The insulating shell of the lamp head should not have broken and leakage, with a switch lamp head, switch handle should not have exposed metal parts of the hanging chain lamps and lanterns should not be subjected to tension, the lamp line should be braided together with the hanging chain of the same indoor or occasions in rows of equipment lamps and lanterns, its base line error should not be greater than 5 mm.

2, wallpaper paste: usually in the door or corner paste the first wallpaper, scraper from top to bottom, from inside to outside, quietly scrape the wallpaper, extrusion bubbles and the remaining glue, so that the wallpaper is flat and close to the wall. Cut the remaining wallpaper with a sharp knife to avoid burrs.

3, floor paving: paving before to carefully clean the ground to ensure that the ground is clean, dry, stable, flat, no floating soil exists, the equipment floor usually have to be installed from the half of the doorway so that to the back of the equipment, the floor scale is not neat, the need to cut and saw the floor to the equipment, because the other half of the house will usually be placed on all kinds of furniture, and therefore not too neat! The floor will also be blocked by the furniture, will not affect the overall beauty.

4, home appliances: water heaters, refrigerators, air conditioners and other home appliances should be equipped by professionals, air conditioning equipment is usually a better position is usually directly above the head of the bed or the person is located directly above the location