Operating rules of plastic wire drawing machine

Wire drawing machine, also known as wire drawing machine and wire drawing machine, is a kind of mechanical equipment widely used in industry, which is widely used in machinery manufacturing, hardware processing, petrochemical industry, plastics, bamboo and wood products, wires and cables and other industries. Wire drawing machines can be divided into metal wire drawing machines, plastic wire drawing machines and bamboo wire drawing machines according to their uses.

Safety operation rules of wire drawing machine: 1. The electrical equipment of the machine tool must be well grounded, and the two limit screws of the stroke bump must be complete;

2. During the operation of the machine tool, it is forbidden to touch the handwheel, handle and electric button at will to avoid accidents; It is forbidden to touch all moving parts by hand; Tools and other items are not allowed to be placed on the workbench;

3. Safety devices such as grinding wheel guard and belt guard installed on the machine tool must be intact, and shall not be disassembled at will. Only tighten all fixing screws of the protective device;

4. When starting the grinding wheel, people are not allowed to stand in front of the grinding wheel to avoid accidents;

5. When repairing or inspecting the machine tool, the power supply of the machine tool must be cut off;

6. When the wire drawing knife of grinding wheel or wire drawing machine is fed, it should be steady and slow to ensure safety. Qin Ying refueling such as bed surface and straightener guide rail;

7. Before starting the machine tool, the grinding wheel or wire drawing knife should be at a certain distance from the grinding roller, and all electrical appliances should be in the stop position. Grinding roller shaft sleeve, grinding roller bearing and stroke punch must be adjusted and fastened;

8. After wire drawing is completed, exit the cutter first, then stop, and put the roller of wire drawing machine on the skid. If it is not used temporarily, it should be coated with antirust oil.