Dental clinic design:
1. In the design of the clinic, the only standard to follow is: function is the basis, the image is based on the functionality of the sublimation of the beautification.
2. The front desk of the clinic is the essence of the whole clinic.
Functional design: a good image after 2 years of clinic operation, it will lose the freshness of the beginning of the image, this time whether the function can play a good effect is to test the clinic front desk design is good or bad standards.
The clinic front desk/front office is the beginning of the whole service and the beginning of the whole sale, it can also do a lot of things in the time consuming patients 5-10 minutes.
Our work procedure is usually: determine the function - functional classification - similar functional area division - auxiliary dispersed functional area division - personnel travel route design - service items in each functional area refinement - special service hardware production - after determining the beautification design
Exterior image
Each clinic's style is based on the different venues, size, height to set.
Design points:
①Reception desk should face the main door.
② clinic information should be placed in the place where patients can stop.
3 diagnosis and treatment guide introduction to follow the patient's route to design.
4 staff can easily monitor all reception areas.
⑤ The internal work area can not be seen by the patient who just entered the door.
3. The main function of the clinic is treatment, so more attention should be paid to the functional use of the clinic design:
Detailed design: how to better clean up?
The clinic will not talk about how to diagnose and treat, first look at how to clean.
In the decoration of the floor to use different colors to divide the different health function areas.
Designed furniture mostly with non-floor to ceiling design, easy to clean up later.
The garbage disposal outlet should be designed in a location that is easy for the nurse to clean and positioned in the garbage holding vessel.
The washing area, cleaning area, and administrative area should be clearly divided, and the decoration should use color, style, location, and so on, to distinguish the above functional areas. The most difficult is the location of the design.
The design of the skirting is a very important part of the clinic can maintain good hygiene, and is often overlooked,
It is recommended that the skirting use marble or special tiles, so that in the future cleaning work, will not get dirty skirting.
Lighting can be designed to improve the illumination of the consulting room, which can visually brighten the walls and side cupboards and appear more hygienic.
Lighting arrangements can divert the patient's attention, and combined with wall decorations, can show the clinic theme.
The arrangement of the line: including water, electric circuit, gas, mainly to consider the capacity increase, maintenance, re-routing.
4. The overall structure of the clinic is a clinic owner to treat the process and arrangement of the complete embodiment.
In the whole design, should be put into the design of the various parts of the cumulative calculation of the frequency of use, set the size of each functional part of the number of attributes such as factors, and then the functional part of the connection with the attribute part of the frequency of use, use of the chance of using the route of return and so on through the limitation of the parameter, and ultimately set the location of the various rooms, reception, the general, waiting for the treatment of the X-ray room, disinfection, etc., and Controlling the route of personnel flow to the most economical, more use of cross route, less use of repeated routes.
5. According to the clinic staff quality and composition to arrange the clinic design
A clinic's full function, and the clinic's internal staff composition and quality is very much related. If a clinic does not have more skilled nursing staff, then the entire design of the monitoring desk should be more centralized design methods, skilled nursing staff in the middle of the position, so that you can give full play to its role in supervising and guiding the entire clinic to drive the level of service. This is more suitable for the public large-scale clinic design.
If the clinic has more skilled staff, the level of average. In the design to pay more attention to the delineation of a separate hidden area, so that you can give customers a more quiet and private consultation space, more suitable for the design of high-end clinics.
Modernization of dental clinic decoration:
(A) the setup of the dental clinic
1. Waiting room
(1) service desk: mainly responsible for the reception, consultation, medical guidance, call, medical records management, charging.
(2) Layout: with sofas, tea, flowers or bonsai; books, magazines, pictorials, digests for patients to read, as well as information on oral health education; film and television equipment can play oral health education knowledge, or scenery, comedy films, etc..
(3) the waiting room should be surrounded by restrooms, conditions should be set up make-up table for patients to wash their hands or make-up
2 Diagnostic and treatment room
(1) treatment work area: integrated treatment table, assistant console, paperwork medical records desk
(2) with the treatment area
3.X-ray room
Dental X-ray machine and oral surface Tomographic X-ray machine is an essential examination and diagnostic equipment for dental clinics. Overseas dental clinics are usually located in the dental chair next to the dental film machine, but China's health epidemic prevention agencies do not allow. Therefore, the clinic must establish a radiography room and a film washing room according to the radiation protection requirements set by the epidemic prevention department.
(1) film room: ordinary dental X-ray machine power is very small, the general current is 0.5 ~ 10mA, the focus in 0.3mm × 0.3mm ~ 0.8mm × 0.8mm or so. The walls are generally protected by lead skin with a thickness of 0.5mm, with a lead equivalent of more than 1.0mmPb, and the lead skin is buried in the wall during construction. Standard lead screens can also be used. The ingestion room should be adjacent to the diagnostic treatment room to improve efficiency.
If a movable lead-plated room is used, it only needs to accommodate one patient and the X-ray machine, and the control part of the X-ray machine is placed outside the lead-plated room by the lead glass, which is more convenient to operate. If the film room is not installed protective walls, can be set up with protective facilities for the operation of the control room.
(2) shuffle room: the conditions of the clinic is equipped with digital dental X-ray machine or digital surface layer X-ray machine, the patient photographic X-ray film, through the CCD sensing acceptance, display on the computer or can be printed directly on the photographs, and can be transmitted through the network system to the oral treatment table for the use of the doctor, you can do not have a shuffle room.
The clinic should generally be equipped with dental X-ray automatic film washer, can be placed in the bright room operation. If limited by economic conditions, can set up a small dark room, *** shuffling with. Darkroom area of 4~6_, three pools for developing, fixing, rinsing. Because the indoor temperature and acidity is large, should be installed to maintain air ventilation facilities.
There should be a dark room outside the room, can be prepared potions, dry film or finishing X-ray film has been taken.
4. Disinfection room
1) disinfection room design standards: pollutants and sub-pollutants must be separated; disposable supplies should be used after the initial disinfection treatment, and then sent to the special department of recovery.
(2) cell phone and instrument disinfection equipment: should include cleaning machine, conservation oiling machine, installation sealing machine, high temperature and high pressure sterilizer.
(3) the environment of the disinfection room: should be bright light, installation of air exchange, dust removal, air sterilization and other devices, indoor pools and sewers, sewers should be connected to the sewage treatment station.
5 model room general small clinics do not have a mechanic room, can be sent to repair parts of the mechanic processing center production. But the model room is necessary, the main perfusion plaster model. The room is best located on the first floor, an area of about 6~8_. A stone countertop with sink should be set up on the edge of the counter. The drain should be thick and straight, 150 to 200_ in diameter, to prevent clogging of the plaster. A gypsum settling ground should be provided before entering the underground drain to settle the plaster. A closet should be provided in the room for storing plaster. Side tables can be placed for gypsum model trimmers, gypsum model cutters, vibrators, etc.
(2) clinic decoration standards
Dental clinic decoration grade and style, should be decided according to the clinic positioning. The general requirements should highlight the professional characteristics of the clinic and cultural atmosphere, to create a relaxed, comfortable treatment environment, conducive to oral health services to control cross-infection. One of the family-style cozy style helps to alleviate the fear of dental patients dental clinic is being welcomed by patients abroad.
(1) bright light in the clinic, ceiling lights should be used ceiling lamps.
(2) good ventilation, exhaust and air sterilization facilities. Fans are not suitable, and the filters of air conditioners must be easy to clean.
(3) The floor material should be polished, wear-resistant and non-slip, and carpets are definitely not suitable.
(4) walls should not have too much hanging objects, paint should be selected corrosion-resistant, easy-to-clean materials, it is best to use cool colors, such as light blue color or milky white, to give a person a relaxed feeling.
(5) clinic furnishings, including furniture, doctor's diagnostic table should be simple, easy to clean and surface disinfection.