Air compressor oil change
1, first of all, remove the inlet valve and outlet valve in the air compressor parts. Remove the valves, accessible air passages, internal condenser and separator on the carbon and deposits, but there may still be deposits and carbon in the pipeline, these will deposits and carbon will gradually dissolve. Therefore, the new oil operation of the initial period of the air compressor must be carried out along the line of regular inspection.
2. Next, start the air compressor as required after cleaning. If it is necessary to run in first, use the same viscosity of the air compressor oil needed for ordinary operation of the air compressor. After 150-250 hours of run-in, drain the run-in oil.
Expanded InformationCleaning Methods
Long-term operation of the air compressor will result in the equipment being clogged with scale, which will reduce efficiency, increase energy consumption, and shorten the life of the compressor. If the scale can not be removed in time, you will face the risk of equipment maintenance, downtime or scrap replacement. Long-term traditional cleaning methods such as mechanical methods (scraping, brushing), high-pressure water, chemical cleaning (pickling), etc. in the cleaning of air compressors appear many problems.
Can not completely remove scale and other deposits, and corrosion of the equipment, residual acid on the material to produce secondary corrosion or corrosion under the scale, ultimately leading to the replacement of the equipment, in addition, the cleaning waste liquid is toxic, need a lot of money for wastewater treatment. Enterprises can use high-efficiency environmentally friendly cleaning agent to avoid the above situation, which has a high efficiency, environmental protection, safety, non-corrosive features, not only good cleaning effect and no corrosion of the equipment to ensure the long-term use of air compressors.