How to wear medical printing wristbands

Summary: How to wear a wristband printer? Medical wristbands, also called medical identification bands, are a kind of wristbands, mainly used in the medical field. Medical wristbands can provide patient identification information, is the latest requirement of the national ministry of health layout content items, its content includes: name, gender, bed number, hospitalization number and other medical special requirements of information. Wear medical wristbands printer need to remove the wristband and supporting plastic buckle, according to the wrist size adjustment wristbands can be, wear need to pay attention to not too loose or too tight, leaving a finger space is more appropriate. Here to learn about it! Wristband printer how to use

1, the correct installation of the wristband in the thermal printer.

2, then we open the print wristband software, enter the main interface of the printing software. Here you can see that there is a lot of information, we need to set up, click the settings button.

3, the database configuration appears, this time we need to add their printer name, and then save. If you need to connect to the database, we can select the appropriate database, and fill in the account password can be. Database content is not filled in can also be printed manually!

4, our computer is connected to the printer in the device manager inside, click the Start button, and then find devices and printers, click to see all of our printers, and then right-click on the printer printer properties, we can see the name of the current printer. Copy the name to the printer field of the printing software.

5, then we can print, click on the print button next to the index can print.

6, if we want to print the newly added information then we need to click on the manual print button. Then a new patient will pop up, we fill in the corresponding information can be. Click on Execute Print Wristband and it prints.

7, we tear off the wristband can be worn on the wrist.

How to wear a medical printing wristband

1, remove the wristband with printed information from the printer outlet.

2, the wristband and the surrounding excess material part of the tear apart.

3, from the printer plastic buckle box to remove the matching plastic buckle.

4. Thread the protruding end of the matching buckle from the back of the wristband into the hole in the head of the wristband.

5. Secure one end of the wristband buckle to your wrist and wrap the other end around your wrist in a circle with the buckle end.

6. Adjust the elasticity according to the size of your wrist and correspond to the corresponding holes. Keep one finger of space between the strap and your wrist to ensure that the strap does not hinder wrist movement. (You can put a finger between the strap and your wrist to make sure the space is appropriate)

7. Fasten the buckle downward.

8. Pull the end of the strap in the opposite direction to check if the buckle is secure.

9, will be the end of the wristband excess part of the use of scissors cut off (can be cut or not cut, depending on the use of demand). Wearing is complete.

10, after the use of scissors can be cut off.

Medical Printing Wristband Notes

1, once the wristband is fastened or affixed firmly, it cannot be reused.

2. Pay attention to safety when using scissors.

3, wear the wristband please do not too loose or too tight, must be adjusted according to the size of the wrist tightness.

4, pay attention to the wristband and wrist to keep a finger space between.

5, please do not use a knife to cut the wristband or pull the wristband off by hand to avoid unnecessary injury.