A, single-hole faucet installation steps
Step 1
First take out the all-copper fixed base
Step 2
Turn the nut from the threaded pipe counterclockwise down
Step 3
Hose threaded with a good yellow wrench, nut, threaded pipe, silicone pads
Step 4
Between Hose through the need to install the vessel (sink, basin, etc.) Note: silicone pads in the installation of the vessel on both sides of a piece, and finally tighten can be fixed more stable
Step 5
The small head of the hose, hand screwed into the faucet inlet, screwed to the screw can not be screwed without the use of other tools screwed
Step 6
The threaded tube screwed into the faucet underneath the side of the vessel, the upper side of the silicone pads can now be used to screw into the faucet. The upper side of the silicone pad can be placed on the lower side of the faucet at this time
Step 7
Screw cap to fix the faucet, screw the screw cap on the bar to tighten it, the installation is complete
Two, faucet installation precautions
1, clear the debris
Installation of the pipeline should be thoroughly cleaned of all kinds of impurities. Can avoid spool damage, jamming, clogging and leakage. At the same time, the surface should be cleaned so that there is no residue of construction materials.
2, metal hose
The bathtub faucet rosette metal hose should be kept in a natural state of expansion, do not coil it on the faucet when not in use. At the same time, in use or not in use, pay attention to the hose and the valve body of the joints do not form a dead end, so as not to break or damage the hose.
3, do not screw
On any kind of water spout products in the use of no need to use excessive force in the switch, only need to gently twist or toggle can be. Even the traditional faucet, do not need to spend a lot of effort to screw. In particular, do not support or use the handle as a handrail. Products equipped with a screen cover for the spout should be disassembled and rinsed after a period of use to remove impurities. Equipped with hose products should pay attention to make the hose often keep the natural stretch state, so as not to break.
4, a small disease
The use of a short period of time will sometimes happen to close the spout is not complete, leakage, loose handle, loose connection leakage and other phenomena, consumers can generally solve their own problems.
Warm reminder: for more information, please pay attention to the Rilong network information, or can visit the Rilong network offline experience hall direct consultation.
Huida bathroom price
American Standard bathroom official website
Faensha bathroom how
Wrigley bathroom how
Kohler bathroom how
Top ten brands of sanitary ware