Watch camera instructions of the operation
1, boot / photo / save: press the key, boot yellow light is long, press the yellow light flashing, this time in standby mode, short press the blue light will flash into the photo state, press a photo; standby mode, press the camera button blue light is on for three seconds after the blue light goes out into the video state. (Note: If the disk space is insufficient, the camera will automatically shut down.)
Archiving: In the video state, short press the camera button to save the video, this time the yellow light is flashing, the indicator is in standby mode (that is, not video or shutdown), 1 minute or so, such as no other operations automatically shut down.
Shutdown: in standby mode, long press the power-on button, the blue light flashes three times.
2. Reset button: If there is a crash, please press the reset button and restart.
This version of the software (V2.5) adds the function of displaying the video time above the recorded video file. The correct way to set the video pen time is as follows:
1, edit a text file, the content is:
2014-10-1909:05:24
Please pay attention to the format, it must be correct, less than two (such as the 8th, to be written as 08), to maintain a certain amount of advancement of the seconds.
2. Name the file time.txt
3. Plug the video pen into the computer and copy the above file to the root directory of the video pen U disk
4. Unplug the video pen from the computer, turn off the computer, and then turn on the computer again, and then the setup of the new time is completed.
5.Once the time is set, it will be saved in the video watch.
Watch Camera Instructions for Connecting to a Computer
1, Check if there is a USB port on your computer (some computers can find the USB port on the back end but not on the front end, please contact your system provider if necessary).
2. Use the USB extension cable supplied with the machine to connect to the PC USB port, and after connecting correctly, you can find the removable disk's drive letter on My Computer.
3, when the camera watch is connected to the PC, the camera watch as a PC removable hard disk has begun to work. At this time you can through the computer very convenient to view video files, transfer, copy, paste and delete data (audio, video files, etc.), you can also store non-music files
4, eject the USB device:
a. Double-click on the Windows interface of the safe to remove the hardware icon (the green arrow in the lower right corner).
b.Select Stop in the Safely Remove Hardware dialog box.
c.Select the device you want to stop, select OK, the device is securely removed, and the Securely Remove Hardware message box pops up at the green arrow in the lower-right corner The USB volume MassStorageDevice device can now be safely removed from the system.
d.Close the Safely Remove Hardware dialog box.
e.Disconnect the player from the PC.
The above is the watch camera instructions in detail, I do not know that we have learned? The use of the process need to pay attention to the use of a well-lit environment, do not put the camera directly to the sun and other strong light sources, so as to avoid damage to the optical device, not in the dust density of the environment is too large to use, so as to avoid the lens as well as other parts of the dust contaminated with dust, affecting the effect of the camera and so on, I hope that the above content can help you.